The replication source volume script (RepSrc.pre) and the replication destination volume script (RepDst.pre) are prepared for a pre-processing script, and it is stored in the following directory. Customize these scripts according to the processing requirements.
/etc/opt/FJSVswsrp/sh
/etc/opt/FJSVswsrp/logicalNodeName/shReplication Source Volume Pre-processing Sample Script (RepSrc.pre)
For Red Hat Enterprise Linux 8, Red Hat Enterprise Linux 7, or Red Hat Enterprise Linux 6 environments
1: #!/bin/sh
2:
3: # AdvancedCopy Manager
4: # Copyright FUJITSU LIMITED, 2002-2017
5:
6: #
7: # Preprocessing of Replication(Source) processing
8: #
9: # Argument: $1 Device name of Source disk
10: # $2 Mount point of Source disk
11: #
12: # Error number
13: # 2: Argument error
14: # 10: umount error
15: # 13: Illegal mount type (stack/bind mount)
16: # 14: fsfreeze error
17:
18: # Argument check
19: case $# in
20: 2)
21: ;;
22: *)
23: exit 2
24: ;;
25: esac
26:
27: device=$1
28: mount_point=$2
29:
30: # Determination postprocessing file name
31: if [ "`echo $device | /bin/grep "/dev/sd"`" != "" ]
32: then
33: # /dev/sd? -> sd?
34: dev="`echo $device | /bin/sed "s/\/dev\///"`"
35: elif [ "`echo $device | /bin/grep "/dev/vd"`" != "" ]
36: then
37: # /dev/vd? -> vd?
38: dev="`echo $device | /bin/sed "s/\/dev\///"`"
39: elif [ "`echo $device | /bin/grep "/dev/FJSV"`" != "" ]
40: then
41: # /dev/FJSVmphd/dsk/mplb?s? -> mplb?s?
42: # /dev/FJSVmphd/dsk/mphd?s? -> mphd?s?
43: dev="`echo $device | /bin/cut -d/ -f5`"
44: elif [ "`echo $device | /bin/grep "/dev/sfdsk/"`" != "" ]
45: then
46: if [ "`echo $device | /bin/grep ":"`" != "" ]
47: then
48: devnam="`echo $device | /bin/cut -d: -f2-`"
49: # /dev/sfdsk/class/dsk/volume:sd? -> class_volume_sd?
50: dev="`echo $device | /bin/sed "s/\/dev\/sfdsk\///"`"
51: dev="`echo $dev | /bin/sed "s/\/dsk\//_/"`"
52: dev="`echo $dev | /bin/sed "s/:/_/"`"
53: device="`echo $device | /bin/cut -d: -f1`"
54: if [ "`echo $devnam | /bin/grep "/dev/disk/by-id/"`" != "" ]
55: then
56: # /dev/sfdsk/class/dsk/volume:/dev/disk/by-id/<device> -> class_volume__by_id_<device>
57: dev="`echo $dev | /bin/sed "s/\/dev\/disk\/by-id\//_by-id_/"`"
58: elif [ "`echo $devnam | /bin/grep "/dev/disk/by-path/"`" != "" ]
59: then
60: # /dev/sfdsk/class/dsk/volume:/dev/disk/by-path/<device> -> class_volume__by_path_<device>
61: dev="`echo $dev | /bin/sed "s/\/dev\/disk\/by-path\//_by-path_/"`"
62: fi
63: else
64: # /dev/sfdsk/class/dsk/volume -> _gds_class_volume
65: dev="_gds_`echo $device | /bin/sed "s/\/dev\/sfdsk\///"`"
66: dev="`echo $dev | /bin/sed "s/\/dsk\//_/"`"
67: fi
68: elif [ "`echo $device | /bin/grep "/dev/vx/dmp/"`" != "" ]
69: then
70: # /dev/vx/dmp/device -> _vx_pv_device
71: dev="_vx_pv_`echo $device | /bin/sed "s/\/dev\/vx\/dmp\///"`"
72: elif [ "`echo $device | /bin/grep "/dev/mapper/"`" != "" ]
73: then
74: # "/dev/mapper/<device>" -> "_mapper_<device>"
75: dev="_mapper_`echo $device | /bin/sed "s/\/dev\/mapper\///"`"
76: elif [ "`echo $device | /bin/grep "/dev/disk/by-id/"`" != "" ]
77: then
78: # "/dev/disk/by-id/<device>" -> "_by-id_<device>"
79: dev="_by-id_`echo $device | /bin/sed "s/\/dev\/disk\/by-id\///"`"
80: elif [ "`echo $device | /bin/grep "/dev/disk/by-path/"`" != "" ]
81: then
82: # "/dev/disk/by-path/<device>" -> "_by-path_<device>"
83: dev="_by-path_`echo $device | /bin/sed "s/\/dev\/disk\/by-path\///"`"
84: else
85: exit 0
86: fi
87: post_file="/etc/opt/FJSVswsrp/"$SWSTGNODE"/data/DEFAULT/"$dev".spre"
88: fstype_file="/etc/opt/FJSVswsrp/"$SWSTGNODE"/data/DEFAULT/"$dev".sfstype"
89:
90: err_log_path="/var/opt/FJSVswsrp/"$SWSTGNODE"/log"
91:
92: if [ "$mount_point" != "" ]
93: # When device was mounted
94: #
95: then
96:
97: proc=""
98: # When device cannot be unmounted(sync)
99: # if [ "$device" = "/dev/sdX" -o "$device" = "/dev/sdY" ]
100: # then
101: # proc="sync"
102: # /bin/sync
103: # /bin/sync
104: # /bin/sync
105: # echo "none" > $post_file
106: # fi
107:
108: # When device cannot be unmounted(fsfreeze)
109: # if [ "$device" = "/dev/sdX" -o "$device" = "/dev/sdY" ]
110: # then
111: # proc="fsfreeze"
112: # result="`/sbin/fsfreeze -f $mount_point 2>&1 `"
113: # if [ $? != 0 ]
114: # then
115: # echo "$result" > $err_log_path/$dev.fsfreeze
116: # exit 14
117: # fi
118: # echo "fsfreeze,$mount_point" > $post_file
119: # fi
120:
121: # When device can be unmounted
122: #
123: # if [ "$proc" = "" ];then
124: if [ `/bin/cat /proc/mounts |/bin/cut -d' ' -f 2|/bin/grep "^$mount_point\$"|/usr/bin/wc -w` != 1 ]; then
125: # stack mount (multi device on $mount_point)
126: /bin/mount > $err_log_path/$dev.umount 2>&1
127: exit 13
128: fi
129: if [ `/bin/cat /proc/mounts |/bin/cut -d' ' -f 1|/bin/grep "^$device\$"|/usr/bin/wc -w` != 1 ]; then
130: cdevice="/dev/`/usr/bin/readlink $device | /bin/sed "s/..\/..\///"`"
131: if [ `/bin/cat /proc/mounts |/bin/cut -d' ' -f 1|/bin/grep "^$cdevice\$"|/usr/bin/wc -w` != 1 ]; then
132: # bind mount (device has multi mount point)
133: /bin/mount > $err_log_path/$dev.umount 2>&1
134: exit 13
135: fi
136: fi
137:
138: /bin/awk "\$2==\"$mount_point\" {print \$3}" /proc/mounts > $fstype_file
139:
140: /bin/umount $mount_point 2>/dev/null
141:
142: if [ $? != 0 ]
143: then
144: retry_count=3
145: sleep_time=1
146: result_flag=1
147:
148: while [ $retry_count -gt 0 ]
149: do
150: /bin/umount $mount_point > $err_log_path/$dev.umount 2>&1
151: if [ $? != 0 ]
152: then
153: retry_count=`expr $retry_count - 1`
154: /bin/sleep $sleep_time
155: else
156: /bin/rm -f $err_log_path/$dev.umount
157: result_flag=0
158: break
159: fi
160: done
161:
162: if [ $result_flag != 0 ]
163: then
164: /sbin/fuser -vum $mount_point> $err_log_path/$dev.fuser 2>&1
165: /bin/ps -ef > $err_log_path/$dev.ps 2>&1
166: exit 10
167: fi
168: fi
169:
170: echo "mount,$mount_point" > $post_file
171:
172: # fi
173:
174: # When device was not mounted
175: #
176: else
177: echo "none" > $post_file
178: fi
179:
180: exit 0For SUSE Linux Enterprise Server 15 or SUSE Linux Enterprise Server 12 environments
1: #!/bin/sh
2:
3: # AdvancedCopy Manager
4: # All Rights Reserved, Copyright FUJITSU LIMITED, 2002-2017
5:
6: #
7: # Preprocessing of Replication(Source) processing
8: #
9: # Argument: $1 Device name of Source disk
10: # $2 Mount point of Source disk
11: #
12: # Error number
13: # 2: Argument error
14: # 10: umount error
15: # 13: Illegal mount type (stack/bind mount)
16:
17: # Argument check
18: case $# in
19: 2)
20: ;;
21: *)
22: exit 2
23: ;;
24: esac
25:
26: device=$1
27: mount_point=$2
28:
29: # Determination postprocessing file name
30: if [ "`echo $device | /bin/grep "/dev/sd"`" != "" ]
31: then
32: # /dev/sd? -> sd?
33: dev="`echo $device | /bin/sed "s/\/dev\///"`"
34: elif [ "`echo $device | /bin/grep "/dev/FJSV"`" != "" ]
35: then
36: # /dev/FJSVmphd/dsk/mplb?s? -> mplb?s?
37: # /dev/FJSVmphd/dsk/mphd?s? -> mphd?s?
38: dev="`echo $device | /usr/bin/cut -d/ -f5`"
39: elif [ "`echo $device | /bin/grep "/dev/sfdsk/"`" != "" ]
40: then
41: if [ "`echo $device | /bin/grep ":"`" != "" ]
42: then
43: devnam="`echo $device | /usr/bin/cut -d: -f2-`"
44: # /dev/sfdsk/class/dsk/volume:sd? -> class_volume_sd?
45: dev="`echo $device | /bin/sed "s/\/dev\/sfdsk\///"`"
46: dev="`echo $dev | /bin/sed "s/\/dsk\//_/"`"
47: dev="`echo $dev | /bin/sed "s/:/_/"`"
48: device="`echo $device | /usr/bin/cut -d: -f1`"
49: if [ "`echo $devnam | /bin/grep "/dev/disk/by-id/"`" != "" ]
50: then
51: # /dev/sfdsk/class/dsk/volume:/dev/disk/by-id/<device> -> class_volume__by_id_<device>
52: dev="`echo $dev | /bin/sed "s/\/dev\/disk\/by-id\//_by-id_/"`"
53: elif [ "`echo $devnam | /bin/grep "/dev/disk/by-path/"`" != "" ]
54: then
55: # /dev/sfdsk/class/dsk/volume:/dev/disk/by-path/<device> -> class_volume__by_path_<device>
56: dev="`echo $dev | /bin/sed "s/\/dev\/disk\/by-path\//_by-path_/"`"
57: fi
58: else
59: # /dev/sfdsk/class/dsk/volume -> _gds_class_volume
60: dev="_gds_`echo $device | /bin/sed "s/\/dev\/sfdsk\///"`"
61: dev="`echo $dev | /bin/sed "s/\/dsk\//_/"`"
62: fi
63: elif [ "`echo $device | /bin/grep "/dev/vx/dmp/"`" != "" ]
64: then
65: # /dev/vx/dmp/device -> _vx_pv_device
66: dev="_vx_pv_`echo $device | /bin/sed "s/\/dev\/vx\/dmp\///"`"
67: elif [ "`echo $device | /bin/grep "/dev/mapper/"`" != "" ]
68: then
69: # "/dev/mapper/<device>" -> "_mapper_<device>"
70: dev="_mapper_`echo $device | /bin/sed "s/\/dev\/mapper\///"`"
71: elif [ "`echo $device | /bin/grep "/dev/disk/by-id/"`" != "" ]
72: then
73: # "/dev/disk/by-id/<device>" -> "_by-id_<device>"
74: dev="_by-id_`echo $device | /bin/sed "s/\/dev\/disk\/by-id\///"`"
75: elif [ "`echo $device | /bin/grep "/dev/disk/by-path/"`" != "" ]
76: then
77: # "/dev/disk/by-path/<device>" -> "_by-path_<device>"
78: dev="_by-path_`echo $device | /bin/sed "s/\/dev\/disk\/by-path\///"`"
79: else
80: exit 0
81: fi
82: post_file="/etc/opt/FJSVswsrp/"$SWSTGNODE"/data/DEFAULT/"$dev".spre"
83: fstype_file="/etc/opt/FJSVswsrp/"$SWSTGNODE"/data/DEFAULT/"$dev".sfstype"
84:
85: err_log_path="/var/opt/FJSVswsrp/"$SWSTGNODE"/log"
86:
87: if [ "$mount_point" != "" ]
88: # When device was mounted
89: #
90: then
91: proc=""
92: # When device cannot be unmounted(sync)
93: # if [ "$device" = "/dev/sdX" -o "$device" = "/dev/sdY" ]
94: # then
95: # proc="sync"
96: # /bin/sync
97: # /bin/sync
98: # /bin/sync
99: # echo "none" > $post_file
100: # fi
101:
102: # When device can be unmounted
103: #
104: # if [ "$proc" = "" ];then
105: if [ `/bin/cat /proc/mounts | /usr/bin/cut -d' ' -f 2| /bin/grep "^$mount_point\$"| /usr/bin/wc -w` != 1 ]; then
106: /bin/mount > $err_log_path/$dev.umount 2>&1
107: exit 13
108: fi
109:
110: if [ `/bin/cat /proc/mounts | /usr/bin/cut -d' ' -f 1| /bin/grep "^$device\$"| /usr/bin/wc -w` != 1 ]; then
111: cdevice="/dev/`/usr/bin/readlink $device | /bin/sed "s/..\/..\///"`"
112: if [ `/bin/cat /proc/mounts | /usr/bin/cut -d' ' -f 1|/bin/grep "^$cdevice\$"|/usr/bin/wc -w` != 1 ]; then
113: /bin/mount > $err_log_path/$dev.umount 2>&1
114: exit 13
115: fi
116: fi
117:
118: /bin/awk "\$2==\"$mount_point\" {print \$3}" /proc/mounts > $fstype_file
119:
120: /bin/umount $mount_point 2>/dev/null
121:
122: if [ $? != 0 ]
123: then
124: retry_count=3
125: sleep_time=1
126: result_flag=1
127:
128: while [ $retry_count -gt 0 ]
129: do
130: /bin/umount $mount_point > $err_log_path/$dev.umount 2>&1
131: if [ $? != 0 ]
132: then
133: retry_count=`expr $retry_count - 1`
134: /bin/sleep $sleep_time
135: else
136: /bin/rm -f $err_log_path/$dev.umount
137: result_flag=0
138: break
139: fi
140: done
141:
142: if [ $result_flag != 0 ]
143: then
144: /bin/fuser -vum $mount_point> $err_log_path/$dev.fuser 2>&1
145: /bin/ps -ef > $err_log_path/$dev.ps 2>&1
146: exit 10
147: fi
148: fi
149:
150: echo "mount,$mount_point" > $post_file
151:
152: # fi
153:
154: # When device was not mounted
155: #
156: else
157: echo "none" > $post_file
158: fi
159:
160: exit 0Replication Destination Volume Pre-processing Sample Script (RepDst.pre)
For Red Hat Enterprise Linux 8, Red Hat Enterprise Linux 7, or Red Hat Enterprise Linux 6 environments
1: #!/bin/sh
2:
3: # AdvancedCopy Manager
4: # Copyright FUJITSU LIMITED, 2002-2012
5:
6: #
7: # Preprocessing of Replication(Destination) processing
8: #
9: # Argument: $1 Device name of Destination disk
10: # $2 Mount point of Destination disk
11: #
12: # Error number
13: # 2: Argument error
14: # 10: umount error
15: # 13: Illegal mount type (bind/stack mount)
16:
17: # Argument check
18: case $# in
19: 2)
20: ;;
21: *)
22: exit 2
23: ;;
24: esac
25:
26: device=$1
27: mount_point=$2
28:
29: # Determination postprocessing file name
30: if [ "`echo $device | /bin/grep "/dev/sd"`" != "" ]
31: then
32: # /dev/sd? -> sd?
33: dev="`echo $device | /bin/sed "s/\/dev\///"`"
34: elif [ "`echo $device | /bin/grep "/dev/vd"`" != "" ]
35: then
36: # /dev/vd? -> vd?
37: dev="`echo $device | /bin/sed "s/\/dev\///"`"
38: elif [ "`echo $device | /bin/grep "/dev/FJSV"`" != "" ]
39: then
40: # /dev/FJSVmphd/dsk/mplb?s? -> mplb?s?
41: # /dev/FJSVmphd/dsk/mphd?s? -> mphd?s?
42: dev="`echo $device | /bin/cut -d/ -f5`"
43: elif [ "`echo $device | /bin/grep "/dev/sfdsk/"`" != "" ]
44: then
45: if [ "`echo $device | /bin/grep ":"`" != "" ]
46: then
47: devnam="`echo $device | /bin/cut -d: -f2-`"
48: # /dev/sfdsk/class/dsk/volume:sd? -> class_volume_sd?
49: dev="`echo $device | /bin/sed "s/\/dev\/sfdsk\///"`"
50: dev="`echo $dev | /bin/sed "s/\/dsk\//_/"`"
51: dev="`echo $dev | /bin/sed "s/:/_/"`"
52: device="`echo $device | /bin/cut -d: -f1`"
53: if [ "`echo $devnam | /bin/grep "/dev/disk/by-id/"`" != "" ]
54: then
55: # /dev/sfdsk/class/dsk/volume:/dev/disk/by-id/<device> -> class_volume__by_id_<device>
56: dev="`echo $dev | /bin/sed "s/\/dev\/disk\/by-id\//_by-id_/"`"
57: elif [ "`echo $devnam | /bin/grep "/dev/disk/by-path/"`" != "" ]
58: then
59: # /dev/sfdsk/class/dsk/volume:/dev/disk/by-path/<device> -> class_volume__by_path_<device>
60: dev="`echo $dev | /bin/sed "s/\/dev\/disk\/by-path\//_by-path_/"`"
61: fi
62: else
63: # /dev/sfdsk/class/dsk/volume -> _gds_class_volume
64: dev="_gds_`echo $device | /bin/sed "s/\/dev\/sfdsk\///"`"
65: dev="`echo $dev | /bin/sed "s/\/dsk\//_/"`"
66: fi
67: elif [ "`echo $device | /bin/grep "/dev/vx/dmp/"`" != "" ]
68: then
69: # /dev/vx/dmp/device -> _vx_pv_device
70: dev="_vx_pv_`echo $device | /bin/sed "s/\/dev\/vx\/dmp\///"`"
71: elif [ "`echo $device | /bin/grep "/dev/mapper/"`" != "" ]
72: then
73: # "/dev/mapper/<device>" -> "_mapper_<device>"
74: dev="_mapper_`echo $device | /bin/sed "s/\/dev\/mapper\///"`"
75: elif [ "`echo $device | /bin/grep "/dev/disk/by-id/"`" != "" ]
76: then
77: # "/dev/disk/by-id/<device>" -> "_by-id_<device>"
78: dev="_by-id_`echo $device | /bin/sed "s/\/dev\/disk\/by-id\///"`"
79: elif [ "`echo $device | /bin/grep "/dev/disk/by-path/"`" != "" ]
80: then
81: # "/dev/disk/by-path/<device>" -> "_by-path_<device>"
82: dev="_by-path_`echo $device | /bin/sed "s/\/dev\/disk\/by-path\///"`"
83: else
84: exit 0
85: fi
86: post_file="/etc/opt/FJSVswsrp/"$SWSTGNODE"/data/DEFAULT/"$dev".dpre"
87: fstype_file="/etc/opt/FJSVswsrp/"$SWSTGNODE"/data/DEFAULT/"$dev".dfstype"
88:
89: err_log_path="/var/opt/FJSVswsrp/"$SWSTGNODE"/log"
90:
91: if [ "$mount_point" != "" ]
92: # When device was mounted
93: #
94: then
95:
96: if [ `/bin/cat /proc/mounts |/bin/cut -d' ' -f 2|/bin/grep "^$mount_point\$"|/usr/bin/wc -w` != 1 ]; then
97: # stack mount (multi device on $mount_point)
98: /bin/mount > $err_log_path/$dev.umount 2>&1
99: exit 13
100: fi
101: if [ `/bin/cat /proc/mounts |/bin/cut -d' ' -f 1|/bin/grep "^$device\$"|/usr/bin/wc -w` != 1 ]; then
102: cdevice="/dev/`/usr/bin/readlink $device | /bin/sed "s/..\/..\///"`"
103: if [ `/bin/cat /proc/mounts |/bin/cut -d' ' -f 1|/bin/grep "^$cdevice\$"|/usr/bin/wc -w` != 1 ]; then
104: # bind mount (device has multi mount point)
105: /bin/mount > $err_log_path/$dev.umount 2>&1
106: exit 13
107: fi
108: fi
109:
110: /bin/awk "\$2==\"$mount_point\" {print \$3}" /proc/mounts > $fstype_file
111:
112: /bin/umount $mount_point 2>/dev/null
113:
114: if [ $? != 0 ]
115: then
116: retry_count=3
117: sleep_time=1
118: result_flag=1
119:
120: while [ $retry_count -gt 0 ]
121: do
122: /bin/umount $mount_point > $err_log_path/$dev.umount 2>&1
123: if [ $? != 0 ]
124: then
125: retry_count=`expr $retry_count - 1`
126: /bin/sleep $sleep_time
127: else
128: /bin/rm -f $err_log_path/$dev.umount
129: result_flag=0
130: break
131: fi
132: done
133:
134: if [ $result_flag != 0 ]
135: then
136: /sbin/fuser -vum $mount_point> $err_log_path/$dev.fuser 2>&1
137: /bin/ps -ef > $err_log_path/$dev.ps 2>&1
138: exit 10
139: fi
140: fi
141:
142: echo "mount,$mount_point" > $post_file
143:
144: # When device was not mounted
145: #
146: else
147: echo "none" > $post_file
148: fi
149:
150: exit 0For SUSE Linux Enterprise Server 15 or SUSE Linux Enterprise Server 12 environments
1: #!/bin/sh
2:
3: # AdvancedCopy Manager
4: # All Rights Reserved, Copyright FUJITSU LIMITED, 2002-2011
5:
6: #
7: # Preprocessing of Replication(Destination) processing
8: #
9: # Argument: $1 Device name of Destination disk
10: # $2 Mount point of Destination disk
11: #
12: # Error number
13: # 2: Argument error
14: # 10: umount error
15: # 13: Illegal mount type (bind/stack mount)
16:
17: # Argument check
18: case $# in
19: 2)
20: ;;
21: *)
22: exit 2
23: ;;
24: esac
25:
26: device=$1
27: mount_point=$2
28:
29: # Determination postprocessing file name
30: if [ "`echo $device | /bin/grep "/dev/sd"`" != "" ]
31: then
32: # /dev/sd? -> sd?
33: dev="`echo $device | /bin/sed "s/\/dev\///"`"
34: elif [ "`echo $device | /bin/grep "/dev/FJSV"`" != "" ]
35: then
36: # /dev/FJSVmphd/dsk/mplb?s? -> mplb?s?
37: # /dev/FJSVmphd/dsk/mphd?s? -> mphd?s?
38: dev="`echo $device | /usr/bin/cut -d/ -f5`"
39: elif [ "`echo $device | /bin/grep "/dev/sfdsk/"`" != "" ]
40: then
41: if [ "`echo $device | /bin/grep ":"`" != "" ]
42: then
43: devnam="`echo $device | /usr/bin/cut -d: -f2-`"
44: # /dev/sfdsk/class/dsk/volume:sd? -> class_volume_sd?
45: dev="`echo $device | /bin/sed "s/\/dev\/sfdsk\///"`"
46: dev="`echo $dev | /bin/sed "s/\/dsk\//_/"`"
47: dev="`echo $dev | /bin/sed "s/:/_/"`"
48: device="`echo $device | /usr/bin/cut -d: -f1`"
49: if [ "`echo $devnam | /bin/grep "/dev/disk/by-id/"`" != "" ]
50: then
51: # /dev/sfdsk/class/dsk/volume:/dev/disk/by-id/<device> -> class_volume__by_id_<device>
52: dev="`echo $dev | /bin/sed "s/\/dev\/disk\/by-id\//_by-id_/"`"
53: elif [ "`echo $devnam | /bin/grep "/dev/disk/by-path/"`" != "" ]
54: then
55: # /dev/sfdsk/class/dsk/volume:/dev/disk/by-path/<device> -> class_volume__by_path_<device>
56: dev="`echo $dev | /bin/sed "s/\/dev\/disk\/by-path\//_by-path_/"`"
57: fi
58: else
59: # /dev/sfdsk/class/dsk/volume -> _gds_class_volume
60: dev="_gds_`echo $device | /bin/sed "s/\/dev\/sfdsk\///"`"
61: dev="`echo $dev | /bin/sed "s/\/dsk\//_/"`"
62: fi
63: elif [ "`echo $device | /bin/grep "/dev/vx/dmp/"`" != "" ]
64: then
65: # /dev/vx/dmp/device -> _vx_pv_device
66: dev="_vx_pv_`echo $device | /bin/sed "s/\/dev\/vx\/dmp\///"`"
67: elif [ "`echo $device | /bin/grep "/dev/mapper/"`" != "" ]
68: then
69: # "/dev/mapper/<device>" -> "_mapper_<device>"
70: dev="_mapper_`echo $device | /bin/sed "s/\/dev\/mapper\///"`"
71: elif [ "`echo $device | /bin/grep "/dev/disk/by-id/"`" != "" ]
72: then
73: # "/dev/disk/by-id/<device>" -> "_by-id_<device>"
74: dev="_by-id_`echo $device | /bin/sed "s/\/dev\/disk\/by-id\///"`"
75: elif [ "`echo $device | /bin/grep "/dev/disk/by-path/"`" != "" ]
76: then
77: # "/dev/disk/by-path/<device>" -> "_by-path_<device>"
78: dev="_by-path_`echo $device | /bin/sed "s/\/dev\/disk\/by-path\///"`"
79: else
80: exit 0
81: fi
82: post_file="/etc/opt/FJSVswsrp/"$SWSTGNODE"/data/DEFAULT/"$dev".dpre"
83: fstype_file="/etc/opt/FJSVswsrp/"$SWSTGNODE"/data/DEFAULT/"$dev".dfstype"
84:
85: err_log_path="/var/opt/FJSVswsrp/"$SWSTGNODE"/log"
86:
87: if [ "$mount_point" != "" ]
88: # When device was mounted
89: #
90: then
91:
92: if [ `/bin/cat /proc/mounts | /usr/bin/cut -d' ' -f 2| /bin/grep "^$mount_point\$"| /usr/bin/wc -w` != 1 ]; then
93: /bin/mount > $err_log_path/$dev.umount 2>&1
94: exit 13
95: fi
96:
97: if [ `/bin/cat /proc/mounts | /usr/bin/cut -d' ' -f 1| /bin/grep "^$device\$"| /usr/bin/wc -w` != 1 ]; then
98: cdevice="/dev/`/usr/bin/readlink $device | /bin/sed "s/..\/..\///"`"
99: if [ `/bin/cat /proc/mounts | /usr/bin/cut -d' ' -f 1|/bin/grep "^$cdevice\$"|/usr/bin/wc -w` != 1 ]; then
100: /bin/mount > $err_log_path/$dev.umount 2>&1
101: exit 13
102: fi
103: fi
104:
105: /bin/awk "\$2==\"$mount_point\" {print \$3}" /proc/mounts > $fstype_file
106:
107: /bin/umount $mount_point 2>/dev/null
108:
109: if [ $? != 0 ]
110: then
111: retry_count=3
112: sleep_time=1
113: result_flag=1
114:
115: while [ $retry_count -gt 0 ]
116: do
117: /bin/umount $mount_point > $err_log_path/$dev.umount 2>&1
118: if [ $? != 0 ]
119: then
120: retry_count=`expr $retry_count - 1`
121: /bin/sleep $sleep_time
122: else
123: /bin/rm -f $err_log_path/$dev.umount
124: result_flag=0
125: break
126: fi
127: done
128:
129: if [ $result_flag != 0 ]
130: then
131: /bin/fuser -vum $mount_point> $err_log_path/$dev.fuser 2>&1
132: /bin/ps -ef > $err_log_path/$dev.ps 2>&1
133: exit 10
134: fi
135: fi
136:
137: echo "mount,$mount_point" > $post_file
138:
139: # When device was not mounted
140: #
141: else
142: echo "none" > $post_file
143: fi
144:
145: exit 0