Changing the IP Addresses of L-Servers

Procedure

Execute the following commands to change L-Server IP addresses.

For Virtual L-Servers

Modify the network settings of the OS installed on the L-Server, referring to the IP address and network information of the modified L-Server.
Execute the following command, and confirm the value for Refreship.
If "true" is displayed, then the target virtual L-Server is configured so its IP address is changed automatically when the IP address of the virtual PC linked to it is changed. Therefore, it is not necessary to change the IP address of the L-Server in step 3.
```
> rcxadm lserver show -name Virtual_L-Server_name
```

Execute the following commands to change L-Server IP addresses.

> rcxadm lserver modify -name Virtual_L-Server_name -file XML_file_for_changing_the_network [-nowait]

For Physical L-Servers

Modify the network settings of the OS installed on the L-Server, referring to the IP address and network information of the modified L-Server.

Execute the following commands to change L-Server IP addresses.

> rcxadm lserver modify -name Physical_L-Server_name -type physical -file XML_file_for_changing_the_network [-nowait]

Confirmation of Results

Execute the following command and confirm that L-Server IP addresses have been changed.

If the target L-Server is a virtual L-Server and the value "true" is displayed for Refreship (as checked in step 2), it may take a while for the change of the network settings of the OS to be reflected on the IP address of the L-Server.

> rcxadm lserver show -name L-Server_name -format xml

See

For details on the rcxadm lserver command, refer to "4.3 rcxadm lserver".
For details on XML files for changing the network, refer to the following:
- For Virtual PCs
  
  "Format of XML Files for Changing the Network of Virtual L-Servers"
- For SBC Servers
  
  "Format of XML Files for Changing the Network of Physical L-Servers"

Note

[Trend Micro OfficeScan]

Modifying the IP addresses of L-Servers may also require modification to the settings of OfficeScan 11.0 or OfficeScan XG.

For details, refer to the manuals of OfficeScan 11.0 or OfficeScan XG.

[Symantec]

Modifying the IP addresses of L-Servers may also require modification of the settings of Symantec Endpoint Protection.

For details, refer to the manuals of Symantec Endpoint Protection.

[McAfee]

Modifying the IP addresses of L-Servers may also require modification of the settings of McAfee ePolicy Orchestrator.

For details, refer to the manuals of McAfee ePolicy Orchestrator.

3.2.7 Changing the IP Addresses of L-Servers