XML Files for Changing the Connected Network of Virtual L-Servers to the Operation Network

This section explains the network definition information (XML) for changing the connected network of virtual L-Servers to the operation network.

Purpose

The XML files necessary for changing the connected network of virtual L-Servers to the operation network.

Creation and storing of XML files for changing the network to the operation network is possible even when Resource Orchestrator is operating.

Execute the following command to output the base XML file for changing the network.
```
> rcxadm lserver show -name L-Server_name -format xml 
```
Delete any unnecessary information from the output XML file and edit the content as shown in "Format of XML Files for Changing the Network of Virtual L-Servers".
The Resources, LServer, and NICs elements must be included.

Depending on the details of the operation network, modify the values for "name" in the NetworkLink element and "address" in the IpAddress element.

Storage Location of XML Files for Changing the Network to the Operation Network

[Windows Manager]

Installation_folder\SVROR\Manager\etc\files\avmgr

Name of the XML File for Changing the Network to the Operation Network: unquarantine_L-Server_name.xml

Information

For environments where multiple NICs are connected
When an L-Server in which multiple NICs are defined is quarantined, enter as many lines enclosed by the NIC elements as the defined NICs to set each NIC so all the NICs will be connected to the operation network.

Specifying the same network for each NIC will cause no problems.
When modifying the default value of the storage directory of the XML files
To modify the default value of the storage directory of the XML files, create the definition file.

For details on the definition results file, refer to "A.5 Definition File of the Storage Directory of the XML Files for Changing the Network".