When this problem occurs, one or some of the following messages will be output.
[Windows Manager]
| Event ID | Type | Messages |
|---|---|---|
| 8029 | Warning |
Unable to receive data from the server. %1. %2 %1: IP address of the VM host %2: Error messages Example: Unable to receive data from the server. 192.168.1.101. No route to host |
| 8030 | Warning |
Server 192.168.1.101 disconnect. %1 %1: IP address of the VM host Example: Server 192.168.1.101 disconnect. 192.168.1.101 |
| 8033 | Warning |
%1 SOCKET error: %2 %1: System call %2: Error messages Example: select() SOCKET error: exception 10060 for server 192.168.1.101 id 192.168.1.101 |
| 8151 | Error |
%1. SOAP error: %2 Detail: %3 %1: Information of the VM host %2: Error messages %3: Detail messages (only output when there are detail messages) Example: server=192.168.1.101 (https:// 192.168.1.101:443/sdk). SOAP error: No route to host. Detail: connect failed in tcp_connect() |
[Linux Manager]
| Event ID | Messages |
|---|---|
| DSA8029W |
Unable to receive data from the server %1. %2 %1: IP address of the VM host %2: Error messages Example: Unable to receive data from the server 192.168.1.101. No route to host |
| DSA8030W |
Server %1 disconnect. %1: IP address of the VM host Example: Server 192.168.1.101 disconnect. |
| DSA8033W |
%1 SOCKET error: %2 %1: System call %2: Error messages Example: select() SOCKET error: exception 10060 for server 192.168.1.101 id 192.168.1.101 |
| DSA8151E |
%1. SOAP error: %2 Detail: %3 %1: Information of the VM host %2: Error messages %3: Detail messages (only output when there are detail messages) Example: server=192.168.1.101 (https://192.168.1.101:443/sdk). SOAP error: No route to host Detail: connect failed in tcp_connect() |
Note
The manager cannot collect and update the information of the VM host and the operated VM guests.
This problem affects [Dashboard]-[System Conditions] and [Dashboard]-[Capacity Planning].
The VM host might be powered off, causing the manager to fail to connect to the VM host.
The messages will also be output when in maintenance mode.
Start the VM host.
When in maintenance mode and doing maintenance work, ignore the messages.
