This section explains how to define setting values for server environments.
In this product, it corresponds to the following kind of servers. Decide the value to set for the server according to the kind of the server.
Blade Servers
For details, refer to "6.1.1 Settings for Blade Servers".
Rack Mount and Tower Servers
For details, refer to "6.1.2 Settings for Rack Mount and Tower Servers".
PRIMEQUEST
For details, refer to "6.2.3 Configuring PRIMEQUEST".
SPARC Enterprise M3000/T Series and SPARC M10-1/M10-4/M12-1/M12-2
For details, refer to "6.1.4 Setting Values for SPARC Enterprise (M3000/T5120/T5140/T5220/T5240/T5440) and SPARC M10-1/M10-4/M12-1/M12-2/M12-1/M12-2".
When switching over SPARC Enterprise servers, refer to "6.1.6 Settings when Switching Over SPARC M10/M12 or SPARC Enterprise Servers".
SPARC Enterprise M4000/M5000/M8000/M9000 and SPARC M10-4S/M12-2S
Refer to "6.1.5 Setting Values for SPARC Enterprise M4000/M5000/M8000/M9000 and SPARC M10-4S/M12-2S/M12-2S".
When switching over SPARC Enterprise servers, refer to "6.1.6 Settings when Switching Over SPARC M10/M12 or SPARC Enterprise Servers".
Servers that do not use the server management software will be treated as "Rack Mount and Tower Servers".
For servers other than HP servers, a Baseboard Management Controller (hereinafter BMC) is used for server management.
For details on modifying values for monitoring timeout of power control operations, refer to "Changing Monitoring Timeout Values of Physical Server Power Operations" in "Appendix A Notes on Operating ServerView Resource Orchestrator" in the "Operation Guide VE".
