This section explains messages starting from DRC20000.
"-dir" option is not specified.
Description
The "-dir" option is not specified.
Corrective Action
This may be an internal error. Collect this message and the investigation data, and then contact Fujitsu technical staff.
"-sync" option must be specified alone.
Description
The "-sync" option must be specified independently.
Corrective Action
This may be an internal error. Collect this message and the investigation data, and then contact Fujitsu technical staff.
"-tenant" and "-global" options are mutually exclusive.
Description
The "-tenant" and "-global" options cannot be specified simultaneously.
Corrective Action
This may be an internal error. Collect this message and the investigation data, and then contact Fujitsu technical staff.
"-report" option is specified without "-active" option.
Description
The "-report" option has been specified without the "-active" option.
Corrective Action
This may be an internal error. Collect this message and the investigation data, and then contact Fujitsu technical staff.
There is already the file that specified by "-report" option.
Description
A file of the same name as specified with the "-report" option has already existed.
Corrective Action
This may be an internal error. Collect this message and the investigation data, and then contact Fujitsu technical staff.
The file that is specified by "-excludelplatformfile" option does not exist.
Description
The file that is specified by "-excludelplatformfile" option does not exist.
Corrective Action
This may be an internal error. Collect this message and the investigation data, and then contact Fujitsu technical staff.
Unknown option is specified.
Description
An unknown option is specified.
Corrective Action
This may be an internal error. Collect this message and the investigation data, and then contact Fujitsu technical staff.
The specified directory does not exist.
Description
The specified directory does not exist.
Corrective Action
This may be an internal error. Collect this message and the investigation data, and then contact Fujitsu technical staff.
The data in the specified directory is incorrect.
Description
The data in the specified directory is invalid.
Corrective Action
Specify the directory in which the exported configuration information exists, then execute the command.
If the error persists, collect this message and the investigation data, and then contact Fujitsu technical staff.
The environment setting of L-Platform Management at export and import is different.
Description
The L-Platform management function environment settings are different for the export and the import.
Corrective Action
The L-Platform management function environment settings are different for the export and the import, therefore the exported configuration information cannot be imported.
Collect this message, the investigation data, and the disaster recovery switchover information, and then contact Fujitsu technical staff.
The version of database structure is not corresponding. export={0} import={1}
Description
The database configurations are different, therefore the exported configuration information cannot be imported.
Parameter
{0}: Database configuration version for the export
{1}: Current database configuration version
Corrective Action
Install a version of the product which is the same as the version of the product used in the environment which was used for the export, then execute the import.
The tenant does not exist, or there is no information to be imported under the tenant.
Description
Either the tenant with the specified name does not exist or there is no information to be imported under the tenant.
Corrective Action
If the wrong tenant name has been specified, execute the command specifying the correct one.
If the correct tenant name has been specified, there is no information, such as template information or L-Platforms that need to be imported under the tenant. In this case, no action is required.
This may be an internal error if the above does not apply. Collect this message, the investigation data, and the disaster recovery switchover information, and then contact Fujitsu technical staff.
Failed in reading the file that is specified by "-excludelplatformfile" option.
Description
It failed in reading the file that is specified by "-excludelplatformfile" option.
Corrective Action
This may be an internal error. Collect this message and the investigation data, and then contact Fujitsu technical staff.
"-tenant" option requires a tenant name.
Description
"-tenant" option requires a tenant name.
Corrective Action
This may be an internal error. Collect this message and the investigation data, and then contact Fujitsu technical staff.
Failed to access the database.
Description
Failed to connect to the database.
Corrective Action
Check whether the manager is running. Start the manager if it is stopped, then re-executes.
If the error persists, collect this message and the investigation data, and then contact Fujitsu technical staff.
Unexpected error has occurred in database access.
Description
An unexpected error occurred in database processing.
Corrective Action
The database may have stopped while the command was running. Start the manager if it is stopped, then re-executes.
If the error persists, collect this message and the investigation data, and then contact Fujitsu technical staff.
Unexpected error has occurred in I/O.
Description
An unexpected error occurred in I/O processing.
Corrective Action
File I/O processing has failed. Check the file system, then re-execute.
If the error persists, collect this message, the investigation data, and the disaster recovery switchover information, and then contact Fujitsu technical staff.
The data already exists. tenant={0} table={1}
Description
Configuration information for the same key is already registered.
Parameter
{0}: Tenant name
{1}: Table name (for example, vsys_software or vsys_template)
Corrective Action
The same configuration information cannot be imported twice.
Check whether the recovery procedure was executed appropriately. If it was not, re-execute the recovery procedure from the start.
If the error persists, collect this message and the investigation data, and then contact Fujitsu technical staff.
The deploy master exists. L-Platform ID={0}
Description
The configuration of the additional recovery target L-Platform has been saved or is in the process of the L-Platform reconfiguration.
Parameter
{0}: L-Platform ID of the additional recovery target L-Platform
Corrective Action
Either finish the reconfiguration, delete the saved configuration, or cancel the process of the reconfiguration.
Then, perform the operation again.
Error has occurred in synchronizing Resource ID.
Description
Resource ID synchronization processing failed.
Corrective Action
There may be inconsistencies between the Resource management and L-Platform management function information.
Check whether the recovery procedure was executed appropriately. If it was not, re-execute the recovery procedure from the start.
If the error persists, collect this message and the investigation data, and then contact Fujitsu technical staff.
Unexpected error has occurred.
Description
An unexpected error occurred.
Corrective Action
Collect this message, the investigation data, and the disaster recovery switchover information, and then contact Fujitsu technical staff.
