8.6.8 [OS] Tab Configuration

Enter the parameters to set for the OS when creating the L-Server. This setting is valid only if an image is specified in the [General] tab.

The setting process is performed the first time the L-Server is started. If an image name is not specified, it is not necessary to enter all these items.

Do not specify the value, as the value will not be set for the items for which entry is not required.

When the OS type on the [Server] tab is "Linux", "Windows", or "Linux(SELinux)", the items can be entered. When the OS type is "Other", the items cannot be entered.

The [OS] tab cannot be configured in the following cases:

When the SELinux setting for the host OS is "Enable"
When the system volume for the guest OS is LVM

Table 8.29 List of Settings
Item	Linux/Linux(SELinux)		Windows		Description
Item	Necessity of Entry	Values When Omitted	Necessity of Entry	Values When Omitted	Description
Host name/Computer name	Possible	L-Server Name	Possible	L-Server Name	Enter the host name or computer name. [Windows] Enter a character string beginning with an alphanumeric character and containing up to 15 alphanumeric characters and hyphens ("-"). The string cannot be composed solely of numbers. [Linux] Enter a character string beginning with an alphanumeric character and containing up to 63 alphanumeric characters and hyphens ("-"). The string cannot be composed solely of numbers. If underscores ("_") or periods (".") are used in an L-Server name, they will be replaced with hyphens ("-"), because these characters cannot be used for host names or computer names. If the item is not specified, the L-Server name is converted and set as indicated above.
Domain name	Possible	localdomain (*1)	Possible	WORKGROUP (*1)	[Linux] Enter the domain name. Enter a character string beginning with an alphabetic character and containing up to 255 alphanumeric characters, hyphens ("-"), and periods ("."). [Windows] Enter the workgroup name. Settings for participation in a domain cannot be made. The same workgroup name as the computer name cannot be specified. Enter a character string beginning with an alphabetical character and containing up to 15 alphanumeric characters, hyphens ("-"), and periods ("."). Refer to the information provided by Microsoft about the character string that can be input to the workgroup name.
DNS search path	Possible	-	Not Required	-	Enter a list of domain names to use for DNS searching, using between 1 and 32,767 characters. You can specify the same characters as the domain name.
Full name	Not Required	-	Possible	WORKNAME (*1)	Enter the Windows full name using between 1 and 50 characters. By default, the value defined in the OS property definition file is entered.
Organization name	Not Required	-	Possible	WORKORGANIZATION (*1)	Enter the organization name displayed in the Windows system properties using between 1 and 50 characters.
Product key	Not Required	-	Possible	- (*1)	Enter a product key.
License mode	Not Required	-	Not Required	-	Even if the license mode is specified, it is not configured in the guest OS.
Maximum number of connections	Not Required	-	Not Required	-	Even if the maximum number of connections is specified, it is not configured in the guest OS.
Administrator password	Not Required	-	Possible	- (*1)	Configure the same password as that specified for the local administrator account during L-Server creation. When specifying a new password, the local administrator account will be overwritten. Enter the password using between 1 and 128 alphanumeric characters or symbols.
Hardware clock configuration	Not Required	Local	Not Required	-	Specify one of the following: UTC Local (LOCAL) Even if the above is specified, it is not reflected on the guest OS.
Time zone	Possible	The same time zone as the OS of the manager	Possible	The same time zone as the OS of the manager	Specify the time zone of the OS.

*1: When the value is specified in the OS property definition file, its values are configured.
*2: When the OS type of the cloning image is Windows, the values for the [OS] Tab or the OS property definition file can only be configured automatically when using the OS version described in the following reference.
"Combinations of the Versions of VM Hosts Supporting the OS Auto-configuration Functions and the OS Versions of Virtual L-Servers" in "When using a Windows cloning image" in "8.6.7 Collecting Cloning Images"

Information

OS Property Definition File

By setting the default values in an OS property definition file in advance, the default values of the information on the [OS] tab, etc. are generated when creating an L-Server.

For details, refer to "8.1.8 OS Property Definition File".

L-Server Operations

Use the ROR console or the rcxadm lserver command for L-Server operations.
For details on how to operate an L-Server using the ROR console, refer to "Chapter 17 L-Server Operations" in the "User's Guide for Infrastructure Administrators (Resource Management) CE".
For details on the rcxadm lserver command, refer to "3.6 rcxadm lserver" in the "Reference Guide (Command/XML) CE".

Changing L-Server Specifications

Use the ROR console or the rcxadm lserver modify command to change L-Server specifications.
For details on the specifications that can be changed, refer to "Chapter 17 L-Server Operations" in the "User's Guide for Infrastructure Administrators (Resource Management) CE".

The value after changing the specifications can be checked in the [Resource List] tab in the orchestration tree.

From the command-line, execute rcxadm lserver list and rcxadm lserver show.
For details, refer to "3.6 rcxadm lserver" in the "Reference Guide (Command/XML) CE".