Top
ServerView Resource Orchestrator Cloud Edition V3.4.0 DR Option Instruction
FUJITSU Software
Appendix D Output Logs when Switchover Occurs because of Disaster Recovery > D.1 Logs Regarding L-Platforms > D.1.4 Actions after Performing Disaster Recovery
PreviousNext

D.1.4 Actions after Performing Disaster Recovery

After performing Disaster Recovery, check vsys_dr_log to see if the logs shown in "D.1.1 Logs of L-Platforms Being Processed during Disaster Recovery Switchover Information Collection" and "D.1.2 Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms" are output.

This section explains the log output according to the processes described for the "Processing" item in "D.1.1 Logs of L-Platforms Being Processed during Disaster Recovery Switchover Information Collection".

  1. SUBSCRIBING

    The L-Platform was being deployed by subscription or by importing L-Servers when it was exported.

    • Pattern1

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level INFO
      Action item
      • SET NETWORK DEVICE RESOURCE-ID
      • SET DISK RESOURCE-ID
      • SET IP ADDRESS
      • SET SCOPE OF L-PLATFORM
      Condition The L-Platform has been deployed successfully after being exported, and the resources exist. The resource status has been reflected in the L-Platform configuration information.
      Corrective Action The L-Platform can be operated as is. No action required.

    • Pattern2

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level INFO
      Action item DELETED L-PLATFORM
      Condition The L-Platform was exported when its subscription was being processed, but the deployment failed, or it was exported when an L-Server was being imported as an L-Platform, but the processing was not completed. The L-Platform configuration information was deleted because the resources do not exist.
      Corrective Action
      • If the subscription was not successfully processed, process it again.

      • If the import of an L-Server as a new L-Platform has not been completed, check the status of the orchestration tree on the [Resources] tab and take the following actions.

        1. Check if the tenant contains the L-Platform ID name folder (*1).

          Perform step 3 if it does not contain folders.

          If it contains a folder, check if the folder also contains an L-Server to be imported.

          Perform steps 2 and 3 if the folder does not contain an L-Server.

          If the folder contains an L-Server, perform steps 2 and 3 after moving the target L-Server to a location where they can be imported, such as immediately below the tenant or root.

        2. Delete the L-Platform ID name folder (*) in the tenant.
        3. Import the L-Server again.

      * Note: The folder name can be specified according to "9.5 Setting the Method for Setting Resource Names" in the "Setup Guide CE". The default is L-Platform ID.

  2. RECONFIGURING

    The L-Platform was during a reconfiguration such as adding or deleting servers, disks or NICs, or changing server details when it was exported.

    • Pattern1

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level INFO
      Action item
      • SET DISK RESOURCE-ID
      • SET IP ADDRESS
      Condition After the L-Platform has been exported while a server was being added by reconfiguration, the server was successfully added. The resource status has been reflected in the L-Platform configuration information.
      Corrective Action The L-Platform can be operated as is. No action required.

    • Pattern2

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level INFO
      Action item DELETED SERVER
      Condition After the L-Platform has been exported while a server was being removed by reconfiguration, the server has been successfully removed, or the L-Platform has been exported while a server was being added by reconfiguration, so the server was not successfully added. The server was removed from the L-Platform configuration information because the resources do not exist.
      Corrective Action

      If the L-Platform does not contain the required server, reconfigure it to add the server.

      If it contains segments to which no server or NIC is connected, reconfigure it to remove the segments.

    • Pattern3

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level INFO
      Action item SET DISK RESOURCE-ID
      Condition After the L-Platform has been exported while adding an extended disk by reconfiguration, the disk has been successfully added. The resource status has been reflected in the L-Platform configuration information.
      Corrective Action The L-Platform can be operated as is. No action required.

    • Pattern4

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level INFO
      Action item DELETED DISK
      Condition After the L-Platform has been exported while removing an extension disk by reconfiguration, the disk has been successfully removed, or after the L-Platform has been exported while adding an extension disk by reconfiguration, the disk was not successfully added. The extended disk was removed from the L-Platform configuration information because the resource does not exist.
      Corrective Action If the L-Platform does not contain required disks, reconfigure it to add an extension disk.

    • Pattern5

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level INFO
      Action item ADDED NIC
      Condition After the L-Platform has been exported while adding an NIC by reconfiguration, the NIC has been successfully added and the resource exists. An NIC has been added to the L-Platform configuration information based on the resource status.
      Corrective Action The L-Platform can be operated as is. No action required.

    • Pattern6

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level INFO
      Action item DELETED NIC
      Condition After the L-Platform has been exported while removing an NIC by reconfiguration, the NIC has been successfully removed. The NIC was removed from the L-Platform configuration information because the resource does not exist.
      Corrective Action If it contains segments to which no server or NIC is connected, reconfigure it to remove the segments.

    • Pattern7

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level INFO
      Action item SET SERVER SPEC
      Condition After the L-Platform has been exported while the server specification was being changed by reconfiguration, the specification change has been successfully processed. The resource status has been reflected in the L-Platform configuration information.
      Corrective Action The L-Platform can be operated as is. No action required.

    • Pattern8

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level WARN
      Action item LIST NETWORK DEVICE PARAMS
      Condition L-Platform was exported while the firewall setting was being changed during a reconfiguration.
      Corrective Action Reflect the setting in the firewall device as required.

    • Pattern9

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level -
      Action item -
      Condition

      The L-Platform has been exported while reconfiguring, but the automatic processing was not performed because no difference has been identified between the L-Platform configuration information and the resource status at switchover. The possible scenarios are as follows:

      • The L-Platform has been exported while the server was being removed, but the server was not successfully removed.
      • The L-Platform has been exported while the disk was being removed, but the disk was not successfully removed.
      • The L-Platform has been exported while the NIC was being removed, but the NIC was not successfully removed.
      • The L-Platform has been exported while the server specification was being changed, but the specification was not successfully changed.
      • The L-Platform has been exported while importing an L-Server to an existing L-Platform, and it was successfully imported.
      • The L-Platform has been exported while releasing an L-Server from an L-Platform, and the L-Server was not successfully released.
      Corrective Action Reconfigure, if required.

  3. UNSUBSCRIBING

    The L-Platform was being unsubscribed when it was exported.

  4. TAKING SNAPSHOT

    The L-Platform that contains the virtual L-Server that the user was taking a snapshot of, or the physical L-Server that was being backed up, when it was exported.

    • Pattern1

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level INFO
      Action item ADDED SNAPSHOT INFORMATION
      Condition After the virtual L-Server has been exported while taking a snapshot, a snapshot was obtained successfully, or after the physical L-Server has been exported while it was performing a backup, backup completed successfully. The snapshot/backup information was added in accordance with the status of resources.
      Corrective Action No action required.

    • Pattern2

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level INFO
      Action item DELETED SNAPSHOT INFORMATION
      Condition After the virtual L-Server has been exported while taking a snapshot, a snapshot was obtained successfully, or after the physical L-Server has been exported while it was performing a backup, backup completed successfully. At this time, any old snapshots/backup data exceeding the maximum number of snapshot image versions were automatically deleted. The snapshot/backup information was deleted in accordance with the status of resources.
      Corrective Action No action required.

    • Pattern3

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level -
      Action item -
      Condition

      After the virtual L-Server has been exported while taking a snapshot, it failed to take a snapshot, or after the physical L-Server has been exported while it was performing a backup, backup failed.

      Note that the end date in the snapshot/backup history will be blank and the status will display as an error.
      Corrective Action Take another snapshot or perform another backup as required.

  5. RESTORING

    The L-Platform contains servers that were being restored when it was exported. Redo the operation as needed.

    In the history of snapshots or backups, the ending date is displayed as a blank and the status as an error.

  6. CLONING

    The L-Platform contains servers that were being collected images of when it was exported.

    • Pattern1

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level -
      Action item -
      Condition

      The L-Platform has been exported while collecting an image.

      If it is successfully collected, the orchestration tree on the [Resources] tab contains a cloning image that matches.
      Corrective Action

      If it contains a cloning image, you can create the corresponding image information and use it for operation.

      If it does not, collect it again.

  7. APPLYING UNSUBSCRIPTION

    The L-Platform was in an application process of an unsubscription when it was exported.

    • Pattern1

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level INFO
      Action item DELETED L-PLATFORM
      Condition After the L-Platform has been exported while it was being unsubscribed, the unsubscription has been accepted and it was successfully unsubscribed. The L-Platform configuration information was deleted because the resources do not exist.
      Corrective Action No action required.

    • Pattern2

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level INFO
      Action item CLEAR FLOW STATUS
      Condition After the L-Platform has been exported while it was being unsubscribed, the unsubscription has not been processed because it has not been accepted, it was rejected, or the unsubscription was unsuccessful. The application status has been initialized because the resources exist.
      Corrective Action If there is an unnecessary L-Platform, unsubscribe it again.

  8. APPLYING SUBSCRIPTION

    The L-Platform was in an application process of a subscription when it was exported.

    • Pattern1

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level -
      Action item -
      Condition The L-Platform has been exported while subscribing to it.
      Corrective Action

      Subscribe to it again, if required.

      If the orchestration tree on the [Resources] tab contains any L-Platform that matches, the L-Platform cannot be appropriately managed by this product. After saving necessary job data, migrate the data to the newly subscribed and deployed L-Platform. Use the cfmg_deletelplatform command to remove unnecessary L-Platforms only found on the [Resources] tab. Refer to "10.1 cfmg_deletelplatform (Delete L-Platform)" in the "Reference Guide (Command/XML) CE".

  9. SAVING NEW CONFIGURATION

    The configuration of the L-Platform was saved when it was exported.

    • Pattern1

      Logs that Reflect the Resource Status due to Automatic Processing of L-Platforms Error level -
      Action item -
      Condition The L-Platform has been exported while its configuration was being saved.
      Corrective Action

      Subscribe to it again, if required.

      If the orchestration tree on the [Resources] tab contains any L-Platform that matches, the L-Platform cannot be appropriately managed by this product. After saving necessary job data, migrate the data to the newly subscribed and deployed L-Platform. Use the cfmg_deletelplatform command to remove unnecessary L-Platforms only found on the [Resources] tab. Refer to "10.1 cfmg_deletelplatform (Delete L-Platform)" in the "Reference Guide (Command/XML) CE".

  10. APPLYING RECONFIGURE

    The L-Platform was in an application process of a reconfiguration when it was exported.

  11. SAVING RECONFIGURATION

    The configuration of a reconfiguration of the L-Platform was saved when it was exported.

PreviousNext
Copyright 2012-2019 FUJITSU LIMITED