PRIMECLUSTER Installation and Administration Guide4.3

K.1 Changes in PRIMECLUSTER 4.3A40 from 4.2A00

Incompatible commands

The following commands of PRIMECLUSTER 4.3A40 are incompatible with PRIMECLUSTER 4.2A00.

• K.1.1 hvshut command

• K.1.2 hvswitch command

• K.1.3 sdtool command

• K.1.4 clrccusetup command

• K.1.5 hvdump command

Incompatible functions

The following functions of PRIMECLUSTER 4.3A40 are incompatible with PRIMECLUSTER 4.2A00.

• K.1.6 MAC address takeover

• K.1.7 Operator intervention request

• K.1.8 Behavior of CF startup

• K.1.9 IP Interconnect

• K.1.10 Setting Up Fsystem Resources

• K.1.11 Shutdown Facility

• K.1.12 Procedure Resources

• K.1.13 HV_CONNECT_TIMEOUT

• K.1.14 Shutdown Configuration Wizard

• K.1.15 Shutdown agent selection screen for the shutdown configuration wizard

• K.1.16 CF wizard

• K.1.17 Posting Notification of a Resource Failure or Recovery

• K.1.18 Display of the resource fault trace

• K.1.19 Changes of the target node to forcibly shut down when a heartbeat failure occurs

Incompatible messages

The following messages of PRIMECLUSTER 4.3A40 are incompatible with PRIMECLUSTER 4.2A00.

• K.1.20 Changes of RMS console message

• K.1.21 Changes of the response message for the operator intervention request

• K.1.22 Changes of the RMS message

• K.1.23 Changes of the importance of the message in the RMS wizard

• K.1.24 Messages of the shutdown configuration wizard

• K.1.25 Method to display the messages of the shutdown configuration wizard