This section describes how to configure storage devices for Resource Orchestrator.
The settings differ depending on whether the L-Server is physical or virtual.
When Using Physical L-Servers
Configure SAN Storage Environments
Configure HBA address rename, VIOM coordination, or ISM coordination
Configure the HBA address rename function, VIOM coordination, or ISM coordination in advance.
Configure the storage and fibre channel switch, install and set up storage management software
With physical L-Servers, virtual storage resources and disk resources are controlled via storage management software.
When allocating disk resources automatically created from virtual storage to physical L-Servers, create the virtual storage resources such as RAID groups or aggregates in advance.
When allocating disk resources to physical L-Servers, create the disk resources such as LUNs in advance.
When using ETERNUS storage
Refer to "D.3.3 When Using ETERNUS Storage".
When using NetApp FAS storage
Refer to "D.3.4 When Using NetApp FAS Storage".
When using EMC CLARiiON storage or EMC VNX Storage
Refer to "D.3.5 When Using EMC CLARiiON Storage or EMC VNX Storage".
When using EMC Symmetrix DMX storage or EMC Symmetrix VMAX storage
Refer to "D.3.6 When Using EMC Symmetrix DMX Storage or EMC Symmetrix VMAX Storage".
When using Storage Server on which FalconStor NSS operates
Refer to "D.3.7 When Using Storage Server on which FalconStor NSS Operates".
Configure iSCSI Storage Environments
Configure the storage and fibre channel switch, install and set up storage management software
When using iSCSI boot on physical L-Servers, create LUNs that can be connected to L-Servers in advance.
When using ETERNUS storage
Refer to "D.3.3 When Using ETERNUS Storage".
When using NetApp FAS storage
Refer to "D.3.4 When Using NetApp FAS Storage".
When Using Virtual L-Servers
Configure the storage and fibre channel switch, install and set up VM management software
Virtual L-Servers are controlled via VM management software.
Create the virtual storage resources such as datastores and the disk resources such as raw devices in advance.
When Using VMware
Refer to "Preparations for Storage Environments" in "E.1.3 Storage Preparations".
When Using Hyper-V
Refer to "Preparations for Storage Environments" in "E.2.3 Storage Preparations".
When Using RHEL5-Xen
Refer to "Preparations for Storage Environments" in "E.3.3 Storage Preparations".
When Using OVM for x86 2.2
Refer to "Preparations for Storage Environments" in "E.4.3 Storage Preparations".
When Using RHEL-KVM
Refer to "Preparations for Storage Environments" in "E.5.3 Storage Preparations (SAN Configurations)".
When Using Solaris Zones
Refer to "Preparations for Storage Environments [Solaris Zones (Solaris 10)]" and "Preparations for Storage Environments [Solaris Zones (Solaris 11)]"in "E.6.3 Storage Preparations".
When Using OVM for SPARC
Refer to "Preparations for Storage Environments" in "E.7.3 Storage Preparations".
When Using Citrix XenServer
Refer to "E.8.3 Storage Preparations".
When Using OVM for x86 3.x
Refer to "E.9.3 Storage Preparations".
