Cause
This message appears when the current logon Windows user does not have Administrator authority.
Resolution
Execute after logon to Windows as Administrator.
Cause
The SWCTVerSettings2.ini file has a read-only attribute.
Resolution
Delete the read-only attribute of the SWCTVerSettings2.ini file.
Cause
System environment has fault.
Resolution
Contact Fujitsu technical staff.
Cause
Logon password error in the system.
Resolution
Reinstall Management Server/Master Management Server and reset it.
Cause
File SWDB.ini in Windows folder has been deleted, or the content of file SWDB.ini is incorrect.
Resolution
Reinstall Management Server/Master Management Server and reset the server.
Cause
SWMailSettings.ini or file SWEventViewer.ini in Windows folder has been deleted.
Resolution
Reinstall Management Server/Master Management Server and reset the server.
Cause
File SWCTVerSettings.ini in Windows folder has been deleted.
Resolution
Reinstall Management Server/Master Management Server and reset the server.
Cause
System error occurred when inspecting [Remote Desktop Connection].
Resolution
Execute the program directly in the Management Server/Master Management Server under the condition that there is no user connected through the [Remote Desktop Connection] function.
Cause
In the same Management Server, another user is starting Server Settings Tool through other session.
Thus, it cannot be started repeatedly.
Resolution
Confirm whether there is any user using Console or [Remote Desktop Connection] function (remote connection through Windows terminal service) and cancel operating Server Settings Tool.
Cause
File SWMailSettings.ini in Windows folder has been deleted.
Resolution
Reinstall Management Server/Master Management Server.
Cause
File SWEventViewer.ini in Windows SYSTEM32 folder has been deleted.
Resolution
Reinstall Management Server/Master Management Server.
Cause
Failed to get service status.
Resolution
Retry after a while. If it fails even though the above measures have been taken, contact Fujitsu technical staff.
Cause
The service cannot be started.
Resolution
Retry after a while. If it cannot be started even though the measures above have been taken, contact Fujitsu technical staff.
Cause
The service cannot be cancelled.
Resolution
Retry after a while. If it cannot be stopped even though the measures above have been taken, contact Fujitsu technical staff.
Cause
In the Management Server/Master Management Server, one of the following processing of Systemwalker Desktop Keeper is being executed.
Data synchronization processing between Master Management Server and Management Server
Backup
Restore
Resolution
Execute again after other processing is completed.
Cause
Try using the "Remote Desktop Connection" function (remote connection through Windows terminal service) to start the program.
Or try starting the program from the Console window when user connected through the [Remote Desktop Connection] function exists in the system.
Resolution
Execute the program directly in the Management Server/Master Management Server under the condition that there is no user connected through the [Remote Desktop Connection] function.
Cause
Errors occurred when importing data from Active Directory .
Resolution
Confirm execution log and event log. However, in the case of being closed by force, information will not be output to event log.
Cause
It might be caused by the following:
Active Directory Linkage module is deleted.
The access authority of Active Directory Linkage module is modified.
Resolution
The following resolutions will be taken due to different causes, and then execute again.
Reinstall Management Server/Master Management Server.
Set the access authority (execution authority) of Active Directory Linkage module correctly.
Cause
The following processing of Systemwalker Desktop Keeper is being executed:
Data synchronization processing between Master Management Server and Management Server
Resolution
Execute again after other processing is completed.
Cause
Data synchronization processing between Master Management Server and Management Server of the Systemwalker Desktop Keeper is being executed.
Resolution
Execute again after other processing is completed.
Cause
In Master Management Server/Management Server, one of the following processing of Systemwalker Desktop Keeper is being executed.
Data synchronization processing between Master Management Server and Management Server
Backup
Restore
Active Directory Linkage
Resolution
Execute again after other processing is completed.
Cause
It might be caused by the following:
Systemwalker Desktop Patrol composition information import command has been deleted.
The access authority of Systemwalker Desktop Patrol configuration information import command has been modified.
Systemwalker Desktop Patrol server information has not been set.
Linkage file has not been created in Systemwalker Desktop Patrol server.
The content of Linkage file created in Systemwalker Desktop Patrol server has errors.
Resolution
The following resolutions will be taken according to different causes, and then execute again.
Reinstall Management Server/Master Management Server.
Correctly set the access authority (execution authority) of Systemwalker Desktop Patrol composition information import command.
Correctly set URL of Desktop Patrol in the log management environment setup window.
Create linkage file in Desktop Patrol.
Create linkage file in Desktop Patrol again.
Cause
Errors occurred in the process of importing data from Systemwalker Desktop Patrol.
Resolution
Confirm execution log and event log. However, in the case of being closed by force, information will not be output to event log.
Variable Information
%1: current status of Level Control Service [Start and Stop]
%2: current status of Server Service [Start and Stop]
%3: current status of Secure Communication Service [Start and Stop]
Cause
-
Resolution
Click the [OK] button.
Cause
-
Resolution
Click the [OK] button.
Variable Information
%1: current status of Level Control Service [Start and Stop]
%2: current status of Server Service [Start and Stop]
%3: current status of Secure Communication Service [Start and Stop]
Cause
-
Resolution
Click the [OK] button.
Cause
-
Resolution
Click the [OK] button.
Variable Information
%1: current status of Level Control Service [Start and Stop]
%2: current status of Server Service [Start and Stop]
%3: current status of Secure Communication Service [Start and Stop]
Cause
-
Resolution
Click the [OK] button.
Cause
-
Resolution
Click the [OK] button.
Cause
Data is being imported from Systemwalker Desktop Patrol.
Resolution
Wait until the processing is completed.
Cause
-
Resolution
Click the [OK] button.
Cause
The service of the Management Server should be stopped before modifying the content of "System Settings".
Resolution
Click the [OK] button when checking the content. Click the [Cancel] button to cancel the processing. When updating the information, click the [OK] button after stopping the service of Management Server.
Cause
The service of the Management Server should be stopped before modifying the content of "Active Directory Linkage Settings".
Resolution
Click the [OK] button for content reference. Click the [Cancel] button to cancel the processing. When updating the information, click the [OK] button after stopping the service of Management Server.
Cause
The service of the Management Server should be stopped before modifying the content of this window.
Resolution
Click the [OK] button for content reference. Click the [Cancel] button to cancel the processing. When updating the information, click the [OK] button after stopping the service of Management Server.
Cause
The service of the Management Server should be stopped before modifying the content of this window.
Resolution
Click the [OK] button for content reference. Click the [Cancel] button to cancel the processing. When updating the information, click the [OK] button after stopping the service of the Management Server.
Cause
The service of the Management Server should be stopped before modifying folder settings.
Resolution
Click the [OK] button for referencing the settings. Click the [Cancel] button for terminating the processing.
When updating folder/CT self-version upgrade settings, click the [OK] button after stopping the service of the Management Server.
Cause
The service of the Management Server should be stopped before modifying the content of this window.
Resolution
Click the [OK] button for content reference. Click the [Cancel] button to cancel the processing. When updating the information, click the [OK] button after stopping the service of the Management Server.
Variable Information
%1: current status of Level Control Service [Start and Stop]
%2: current status of Server Service [Start and Stop]
%3: current status of Secure Communication Service [Start and Stop]
Cause
Intend to start Level Control Service, Server Service and Secure Communication Service.
Resolution
To continue, click the [OK] button. To finish processing, click the [Cancel] button.
Variable Information
%1: current status of Level Control Service [Start and Stop]
%2: current status of Server Service [Start and Stop]
%3: current status of Secure Communication Service [Start and Stop]
Cause
Intend to stop Level Control Service, Server Service and Secure Communication Service.
Resolution
To continue, click the [OK] button. To finish processing, click the [Cancel] button.
Cause
Intend to start linking with Active Directory data.
Resolution
To continue, click the [OK] button. To finish processing, click the [Cancel] button.
Cause
The prompt message when starting the [Exclusion Status Removal] window.
Resolution
Click the [OK] button for displaying the [Exclusion Status Removal] window. To cancel the processing, click the [Cancel] button.
Cause
Prompt information when starting to import Systemwalker Desktop Patrol composition information.
Resolution
To continue, click the [OK] button. To finish processing, click the [Cancel] button.
Cause
The database cannot be constructed or deleted because the Management Server is running.
Resolution
Stop the Management Server while constructing or deleting the database.
Cause
The user ID has not been entered.
Resolution
Enter the user ID.
Cause
The password has not been entered.
Resolution
Enter the password.
Cause
The user ID or password is incorrect.
Resolution
Enter the correct user ID and password.
Cause
The prompt message when the authentication failed for three times or more.
Resolution
Logon with the correct user ID and password to start Server Settings Tool.
Cause
The database is not constructed, or failed to access the database.
Resolution
Construct a database, or confirm the database environment.
Cause
The old password has not been entered.
Resolution
Enter the old password.
Cause
The new password has not been entered.
Resolution
Enter the new password.
Cause
The confirm password has not been entered.
Resolution
Enter the confirm password.
Cause
The entered new password is different from the confirm password.
Resolution
Enter the correct new password and confirm password.
Cause
The old password is incorrect.
Resolution
Enter the correct password.
Cause
Characters not allowed are contained in the entered password.
Resolution
Enter the password with characters allowed.
Cause
The password has not been encrypted.
Resolution
Perform the modification again to change the password.
Cause
DB connection strings has not been entered.
Resolution
Enter DB connection strings.
Cause
Character not allowed in DB connection strings have been entered.
Resolution
Enter allowed characters.
Cause
DB connection user ID has not been entered.
Resolution
Enter DB connection user ID.
Cause
Characters not allowed in DB connection user ID have been entered.
Resolution
Enter allowed characters.
Cause
The values of the password (first entry) and the password (re-entry) are different.
Resolution
Enter the same value in the password (first entry) and the password (re-entry).
Cause
DB connection timeout value has not been entered.
Resolution
Enter DB connection timeout value.
Cause
Numerals out of the range from 15 to 999 or characters other than numerals are entered in DB connection timeout value.
Resolution
Enter a value within 15-999.
Cause
DB command timeout value has not been entered.
Resolution
Enter DB command timeout value.
Cause
Numerals out of the range from 15 to 999 or characters other than numerals are entered in DB command timeout value.
Resolution
Enter a value within 15-999.
Cause
-
Resolution
Click the [OK] button.
Cause
Click the "Settings/Connection Test" button for connection test, but failed to connect with the database.
Resolution
Confirm the entered value.
Cause
When registering the first node, node classification has not been set as "Local Node".
Resolution
Set node classification as "Local Node".
Cause
When registering the second node and following nodes, node classification has not been set as "Other Nodes".
Resolution
Set node classification as "Other Nodes".
Cause
Node classification cannot be changed.
Resolution
-
Cause
Node name has not been entered.
Resolution
Enter the node name.
Cause
Characters not allowed in node name has been entered.
Resolution
Enter allowed characters.
Cause
Node name is repeated.
Resolution
Enter a different node name.
Cause
The computer name has not been entered.
Resolution
Enter the computer name.
Cause
Characters not allowed in the computer name have been entered.
Resolution
Enter allowed characters.
Cause
The computer name is repeated.
Resolution
Enter a different computer name.
Cause
IP address has not been entered.
Resolution
Enter IP address.
Cause
IP address or server name is repeated.
Resolution
Enter a different IP address or server name.
Cause
Server category error.
Resolution
Only one "Root Server" can be registered. Select "Sub-Level Server".
Cause
Local node cannot be deleted.
Resolution
-
Cause
Information in the operation database environment is incomplete. (PHYSICALNODELIST)
Resolution
Contact Fujitsu technical staff.
Cause
Information in the operation database is incomplete. (NODEINFO)
Resolution
Contact Fujitsu technical staff.
Cause
The update target has not been selected.
Resolution
Select the update target from the list.
Cause
The target to be deleted has not been selected.
Resolution
Select the target to be deleted from the list.
Cause
The user ID has not been entered.
Resolution
Enter the user ID.
Cause
Characters not allowed are used in the user ID.
Resolution
Enter the allowed characters again.
Cause
The user ID is repeated.
Resolution
Enter a different user ID.
Cause
The access authority has not been selected.
Resolution
Select access authority.
Cause
The number of messages has exceeded 1000, so they cannot be registered.
Resolution
-
Cause
The E-mail sending server has not been input.
Resolution
Input E-mail sending server.
Cause
The input E-mail sending server is incorrect.
Resolution
Input the correct E-mail sending server.
Cause
E-mail address of the recipient (TO) has not been input.
Resolution
Input E-mail address of the recipient (TO).
Cause
The input E-mail address of the recipient (TO) is incorrect.
Resolution
Input the correct E-mail address of the recipient (TO).
Cause
The input E-mail address of the recipient (CC) is incorrect.
Resolution
Input the correct E-mail address of the recipient (CC).
Cause
E-mail address of the addresser (FROM) has not been input.
Resolution
Input the E-mail address of the addresser (FROM).
Cause
The input E-mail address of the addresser (FROM) is incorrect.
Resolution
Input the correct E-mail address of the addresser (FROM).
Cause
The server IP address or server name has not been input.
Resolution
Input the server IP address or server name.
Cause
The input server IP address or server name is incorrect.
Resolution
Input the correct server IP address or server name.
Cause
The port number (Management Console/Level Control Service) has not been entered.
Resolution
Enter the port number (Management Console/Level Control Service).
Cause
The entered port number (Management Console/Level Control Service) value has exceeded the range from 5001 to 60000.
Resolution
Enter a value within 5001-60000.
Cause
The port number (Log Viewer/Level Control Service) has not been entered.
Resolution
Enter the port number (Log Viewer/Level Control Service).
Cause
The entered port number (Log Viewer/Level Control Service) value has exceeded the range from 5001 to 60000.
Resolution
Enter a value within 5001-60000.
Cause
The port number (Server Service/Level Control Service) has not been entered.
Resolution
Enter the port number (Server Service/Level Control Service).
Cause
The entered port number (Server Service/Level Control Service) value has exceeded the range from 5001 to 60000.
Resolution
Enter a value within 5001-60000.
Cause
The port number (Level Control Service/Server Service) has not been entered.
Resolution
Enter the port number (Level Control Service/Server Service).
Cause
The entered port number (Level Control Service/Server Service) value has exceeded the range from 5001 to 60000.
Resolution
Enter a value within 5001-60000.
Cause
The port number (Level Control Service (upper-level)/Level Control Service (sub-level)) has not been entered.
Resolution
Enter the port number (Level Control Service (upper-level)/Level Control Service (sub-level)).
Cause
The entered port number (Level Control Service (upper-level)/Level Control Service (sub-level)) value has exceeded the range from 5001 to 60000.
Resolution
Enter a value within 5001-60000.
Cause
The port number (Level Control Service (sub-level)/Level Control Service (upper-level)) has not been entered.
Resolution
Enter the port number (Level Control Service (sub-level)/Level Control Service (upper-level)).
Cause
The entered port number (Level Control Service (sub-level)/Level Control Service (upper-level)) value has exceeded the range from 5001 to 60000.
Resolution
Enter a value within 5001-60000.
Cause
The port number (Server Service/CT) has not been entered.
Resolution
Enter the port number (Server Service/CT).
Cause
The entered port number (Server Service/CT) value has exceeded the range from 5001 to 60000.
Resolution
Enter a value within 5001-60000.
Cause
The port number (CT /Server Service) has not been entered.
Resolution
Enter the port number (CT /Server Service).
Cause
The port number (CT/Server Service) value has exceeded the range from 5001 to 60000.
Resolution
Enter a value within 5001-60000.
Cause
The port number (Server Service/CT (coexist with Management Server)) has not been entered.
Resolution
Enter the port number (Server Service/CT (coexist with Management Server)).
Cause
The port number (Server Service/CT (coexist with Management Server)) value has exceeded the range from 5001 to 60000.
Resolution
Enter a value within 5001-60000.
Cause
The port number (CT/Server Service (image, etc.)) has not been entered.
Resolution
Enter the port number (CT/Server Service (image, etc.)).
Cause
The port number (CT/Server Service (image, etc.)) value has exceeded the range from 5001 to 60000.
Resolution
Enter a value within 5001-60000.
Cause
The same value has been entered in the item which cannot be specified as the same port number.
Resolution
Enter different values.
Cause
The connection timeout value between servers has not been entered.
Resolution
Enter the connection timeout value between servers.
Cause
A value out of the range from 1 to 999 has been entered in the connection timeout value between servers.
Resolution
Enter a value within 1-999.
Cause
Communication retry times between servers has not been entered.
Resolution
Enter communication retry times between servers.
Cause
A value out of the range from 1 to 9 has been entered in communication retry times between servers.
Resolution
Enter a value within 1-9.
Cause
Connection retry times of CT-Server has not been entered.
Resolution
Enter connection retry times of CT-Server.
Cause
A value out of the range from 1 to 9 has been entered in connection retry times of CT-Server.
Resolution
Enter a value within 1-9.
Cause
The maximum simultaneous connection number of CT has not been entered.
Resolution
Enter the maximum simultaneous connection number of CT.
Cause
A value out of the range from 1 to 9999 has been entered in the maximum simultaneous connection number of CT.
Resolution
Enter a value within 1-9999.
Cause
The command line log saving target path folder has not been input.
Resolution
Input the command line log saving target path folder.
Cause
The characters not allowed are used in the folder name of the command line log saving target path folder.
Resolution
Input with the allowed characters again.
Cause
The log saving location or command prompt is not correctly set.
This error is displayed if a non-existing drive or folder is specified.
Resolution
Specify the correct folder name.
Cause
The command line log saving target path folder is set as the root directory of drive.
Resolution
Input the folder name of the command line log saving target path folder (full path).
Cause
The attached data saving target path folder has not been input.
Resolution
Input the attached data saving target path folder.
Cause
Characters not allowed are used in the attached data saving target path folder.
Resolution
Input with the allowed characters.
Cause
The attached data saving target path folder has not been set correctly. Message appears when the drive or folder that does not exist is specified.
Resolution
Set the correct folder name.
Cause
The attached data saving target path folder has specified the drive name only.
Resolution
Input the folder name of the attached data saving target path folder (full path).
Cause
The saving target path of log batch receiving data has not been input.
Resolution
Input the saving target path of log batch receiving data.
Cause
Characters not allowed are used in the saving target path folder of log batch receiving data.
Resolution
Input with the allowed characters again.
Cause
The saving target path of log batch receiving data has not been set correctly. Message appears when the drive or folder that does not exist is specified.
Resolution
Set the correct folder name.
Cause
The drive name only is specified in the saving target path of log batch receiving data.
Resolution
Input the folder name of the saving target path of log batch receiving data (full path).
Cause
The CT uploading module saving target path has not been input.
Resolution
Input the CT uploading module saving target path.
Cause
Characters not allowed are used in the CT uploading module saving target path folder.
Resolution
Input with the allowed characters.
Cause
The CT uploading module saving target path has not been set correctly. Message appears when the drive or folder that does not exist is specified.
Resolution
Set the correct folder name.
Cause
The drive name is specified in the CT uploading module saving target path only.
Resolution
Input the folder name of the CT uploading module saving target path (full path).
Cause
The simultaneous downloading number (maximum) has not been entered.
Resolution
Enter the simultaneous downloading number (maximum).
Cause
Characters other than halfwidth numerals are contained in the simultaneous downloading number (maximum).
Resolution
Enter halfwidth numerals.
Cause
The entered value of the simultaneous downloading number (maximum) is one out of the range from 0 to 25.
Resolution
Enter a value within 0-25.
Cause
The port number (for receiving E-mail) has not been entered.
Resolution
Enter the port number (for receiving E-mail).
Cause
The entered port number (for receiving E-mail) value is one out of the range from 5001 to 60000.
Resolution
Enter a value within 5001-60000.
Cause
The port number (for sending E-mail) has not been entered.
Resolution
Enter the port number (for sending E-mail).
Cause
The entered port number (for sending E-mail) value is one out of the range from 1 to 65535.
Resolution
Enter a value within 1-65535.
Cause
The port number (for sending E-mail 2) has not been entered.
Resolution
Enter the port number (for sending E-mail 2).
Cause
The entered port number (for sending E-mail 2) value is one out of the range from 1 to 65535.
Resolution
Enter a value within 1-65535.
Cause
The entered port number (for sending E-mail) and the port number (for sending E-mail 2) are the same.
Resolution
Set different port numbers for the port number (for sending E-mail) and the port number (for sending E-mail 2).
Cause
The log output target path folder has not been input.
Resolution
Input the log output target path folder.
Cause
Characters not allowed are used in the log output target path folder.
Resolution
Input with the allowed characters again.
Cause
The input log output target path folder is incorrect.
Resolution
Input the correct log output target path folder name.
Cause
The drive name only is specified in the log output target path folder.
Resolution
Input the folder name of the log output target path folder (full path).
Cause
The client installation target path has not been input.
Resolution
Input the client installation target path.
Cause
Characters not allowed are used in the client installation target path.
Resolution
Input with the allowed characters again.
Cause
The input client installation target path is incorrect.
Resolution
Input the correct client installation target path.
Cause
The drive name only is specified in the client installation target path.
Resolution
Input the folder name of the client installation target path (full path).
Cause
The installation settings file has not been input.
Resolution
Input the installation settings file.
Cause
Characters not allowed are used in the installation settings file.
Resolution
Input with the allowed characters .
Cause
Folder name that does not exist in the installation settings file has been input.
Resolution
Set the correct file name (full path).
Variable Information
%s: file name
Cause
It might be caused by the following causes. No write-in authority to the saving target path folder. The saving target path folder is set as write prohibited. The saving target path folder is set as write-protection.
Resolution
Specify writable saving target path folder.
Cause
The input installation settings file is incorrect.
Resolution
Input the correct installation settings file.
Cause
In the process of restoring the operation database, the prompt message appears when failed to process the table SETINGS.
Resolution
Restore the data of management information.
Cause
When the classification of the server of local node is "Root Server", try other nodes.
Resolution
The registration of other nodes cannot be performed.
Cause
When the local node is "Sub-Level Server", server of the other nodes can only be registered as "Root Server".
Resolution
Specify the server type correctly.
Cause
Try registering 2 or more other nodes.
Resolution
2 or more other nodes cannot be registered.
Cause
Try modifying the server classification of the local node, but it cannot be modified due to other nodes existing.
Resolution
Modify the server classification of the local node after deleting all other nodes.
Cause
To update other nodes, they must be deleted.
Resolution
To change the information of other nodes, delete them and then register again.
Cause
Try registering the second local node record.
Resolution
Only one record of local node can be registered.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Input it correctly.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Input it correctly.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Input it correctly.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Input it correctly.
Variable Information
%d: number of cases of the registered user information
Cause
Try registering the exceeding part.
Resolution
Delete the registered but unnecessary information first and then register again during registration.
Cause
The user ID has not been entered.
Resolution
Enter the user ID.
Cause
Limit code is contained in the user ID.
Resolution
Do not use limit code in the user ID.
Cause
Limit code is contained the remarks.
Resolution
Do not use limit code in the remarks.
Cause
The port number (for E-mail attachment prohibition) has not been entered.
Resolution
Entered the port number (for E-mail attachment prohibition).
Cause
A value out of the range from 5001 to 60000 has been entered in the port number (for E-mail attachment prohibition).
Resolution
Enter a value within 5001-60000.
Cause
The port number (for E-mail attachment prohibition 2) has not been entered.
Resolution
Enter the port number (for E-mail attachment prohibition 2).
Cause
A value out of the range from 5001 to 60000 has been entered in the port number (for E-mail attachment prohibition 2).
Resolution
Enter a value within 5001-60000.
Cause
The port number (for E-mail sending monitoring) has not been entered.
Resolution
Enter the port number (for E-mail sending monitoring).
Cause
A value out of the range from 0 to 65535 has been entered in the port number (for E-mail sending monitoring).
Resolution
Enter a value within 0-65535.
Cause
The same value is entered in the port number (for E-mail attachment prohibition) and the port number (for receiving E-mail).
Resolution
Set different values for the port number (for E-mail attachment prohibition) and the port number (for receiving E-mail).
Cause
The same value is entered in the port number (for E-mail attachment prohibition) and the port number (for sending E-mail).
Resolution
Set different values for the port number (for E-mail attachment prohibition) and the port number (for sending E-mail).
Cause
The same value has been entered in the port number (for E-mail attachment prohibition) and the port number (for sending E-mail 2).
Resolution
Set different values for the port number (for E-mail attachment prohibition) and the port number (for sending E-mail 2).
Cause
The notification reference time has not been entered.
Resolution
Enter the notification reference time.
Cause
A value out of the range from 30 to 999 has been entered in the notification reference time.
Resolution
Enter a value within 30-999.
Cause
The authentication type has not been selected.
Resolution
Select the authentication type.
Cause
The authentication user ID has not been entered.
Resolution
Enter the authentication user ID.
Cause
The exclusion status has not been selected.
Resolution
Select the exclusion status.
Cause
The exclusion status you selected is the same as the one before updating.
Resolution
After refreshing display, confirm the exclusion status of the record to be updated and the selected exclusion status and then execute again.
Cause
The authentication password has not been entered.
Resolution
Enter the authentication password.
Cause
Perform Linkage has not been selected.
Resolution
Select Perform Linkage.
Cause
The information in the operation database is incomplete. (EXCLUSIONCONTROL)
Resolution
Contact Fujitsu technical staff.
Cause
The information in the database has been modified in the process of operating the target record.
Resolution
Process it again after refreshing display.
Variable Information
%d: number of cases of registered domain controller information
Cause
Number of cases of domain controller information to be registered has exceeded the maximum that can be registered.
Resolution
Delete the logged-on but unnecessary information first, and then logon again.
Cause
The domain name has not been input.
Resolution
Input the domain name.
Cause
The input domain name is incorrect.
Resolution
Input the correct domain name.
Cause
The domain name is repeated.
Resolution
Input a different domain name.
Cause
A file with the correspondent relation of computer name and user ID saved has not been specified.
Resolution
Specify a file with the correspondent relation of computer name and user ID saved.
Cause
The specified file does not exist.
Resolution
Specify a file again after confirming the file.
Cause
Characters not allowed are contained in the authentication user ID.
Resolution
Input with the allowed characters again.
Cause
Characters not allowed are contained in the authentication password.
Resolution
Input with the allowed characters again.
Cause
The administrator notification function is set as "No", but the "Perform SMTP Authentication" check box is still selected.
Resolution
When the administrator notification function is not used, the settings of SMTP authentication cannot be performed. Cancel selecting the "Perform SMTP Authentication" check box.
Cause
The same value has been entered in the port number (for E-mail attachment prohibition 2) and the port number (for receiving E-mail).
Resolution
Set different values for the port number (for E-mail attachment prohibition 2) and the port number (for receiving E-mail).
Cause
The same value has been entered in the port number (for E-mail attachment prohibition 2) and the port number (for sending E-mail).
Resolution
Set different values for the port number (for E-mail attachment prohibition 2) and the port number (for sending E-mail).
Cause
The same value has been entered in the port number (for E-mail attachment prohibition 2) and the port number (for sending E-mail 2).
Resolution
Set different values for the port number (for E-mail attachment prohibition 2) and the port number (for sending E-mail 2).
Cause
The same value has been entered in the port number (for E-mail attachment prohibition 2) and the port number (for E-mail attachment prohibition).
Resolution
Set different values for the port number (for E-mail attachment prohibition 2) and the port number (for E-mail attachment prohibition).
Cause
The same value has been entered in the port number (for E-mail sending monitoring) and the port number (for sending E-mail).
Resolution
Set different values for the port number (for E-mail sending monitoring) and the port number (for sending E-mail).
Cause
The same value has been entered in the port number (for E-mail sending monitoring) and the port number (for sending E-mail 2).
Resolution
Set different values for the port number (for E-mail sending monitoring) and the port number (for sending E-mail 2).
Cause
The same value has been entered in the port number (for E-mail sending monitoring) and the port number (for receiving E-mail).
Resolution
Set different values for the port number (for E-mail sending monitoring) and the port number (for receiving E-mail).
Cause
The same value has been entered in the port number (for E-mail sending monitoring) and the port number (for E-mail attachment prohibition).
Resolution
Set different values for the port number (for E-mail sending monitoring) and the port number (for E-mail attachment prohibition).
Cause
The same value has been entered in the port number (for E-mail sending monitoring) and the port number (for E-mail attachment prohibition 2).
Resolution
Set different values for the port number (for E-mail sending monitoring) and the port number (for E-mail attachment prohibition 2).
Cause
The user ID has not been entered.
Resolution
Enter the user ID.
Cause
Characters not allowed are contained in the user ID.
Resolution
Enter the user ID with the allowed characters again.
Cause
The port number has not been entered.
Resolution
Enter the port number.
Cause
A value out of the range from 0 to 65535 has been entered in the port number.
Resolution
Enter a value within 0-65535.
Cause
Intend to modify the user ID without entering the password.
Resolution
Enter the password when intending to modify the user ID.
Cause
Characters not allowed are contained in the password.
Resolution
Enter the password with characters allowed.
Cause
User ID cannot be modified.
Resolution
Create a new user.
Cause
The input computer name is incorrect.
Resolution
Input the correct computer name.
Cause
The threshold value for notifying DB space insufficient has not been entered.
Resolution
Enter the threshold value for notifying DB space insufficient.
Cause
A value out of the range from 1 to 20 has been entered in the threshold value for notifying DB space insufficient.
Resolution
Enter a value within 1-20.
Cause
The threshold value for notifying disk space insufficient (two methods: specify % or size of the rest space) has not been entered.
Resolution
Enter the threshold value of either % or size of the rest space for notifying disk space insufficient (specify % or size of the rest space).
Cause
A value out of the range from 1 to 20 has been entered in the threshold value for notifying disk space insufficient (% specified).
Resolution
Enter a value within 1-20.
Cause
A value out of the range from 100 to 99999 has been entered in the threshold value for notifying disk space insufficient (size of the rest space specified).
Resolution
Enter a value within 100-99999.
Cause
Probable causes are as follows:
Characters other than numbers, alphabets (A - F, a - f), full stop (.), comma (,) are entered in the server IP address.
Characters other than halfwidth alphanumeric characters (A-Z,a-z,0-9) and the halfwidth hyphen (-) are entered in the server name..
The server name consists of only numbers.
The length of the entered server name is more than 15 characters.
Resolution
Input the correct server IP address or server name.
Cause
The path name of saving target path folder of log batch receiving data is too long.
Resolution
Specify the path within 96 halfwidth characters.
Cause
The path name of command line log saving target path folder is too long.
Resolution
Specify the path within 96 halfwidth characters.
Cause
The path name of the attached data saving target path folder is too long.
Resolution
Specify the path within 96 halfwidth characters.
Cause
The path name of CT uploading module saving target path folder is too long.
Resolution
Specify the path within 96 halfwidth characters.
Cause
Loop back address has been input in the server IP address.
Resolution
Input the correct server IP address.
Cause
Loop back address has been input in the server IP address.
Resolution
Input the correct server IP address.
Cause
The authentication user ID will be modified, but no password is entered.
Resolution
When modifying the authentication user ID, enter the password.
Cause
The input IP address is incorrect.
Resolution
Input the correct server IP address.
Cause
The path name of E-mail content saving target path folder is too long.
Resolution
Specify the path in halfwidth and within 96 characters.
Cause
E-mail content saving target path has not been set correctly. Message appears when drive or folder that does not exist is specified.
Resolution
Set the correct folder name.
Cause
The drive name only is specified in the E-mail content saving target path folder.
Resolution
Input the folder name of E-mail content saving target path (full path).
Cause
Characters not allowed are used in the E-mail content saving target path folder.
Resolution
Input with the allowed characters again.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Input it correctly.
Cause
E-mail content saving target path folder has not been input.
Resolution
Input E-mail content saving target path folder.
Cause
When the option, 'Send more than one email notifications' to the manager is set as [Yes], the email recipient is not set on the E-mail recipient settings window.
Resolution
When selecting [Yes] for sending one or more E-mail notifications to the administrator, set E-mail recipient in the E-mail recipient settings window.
Cause
The path name of saving target path folder of data for fault investigation is too long.
Resolution
Specify the path within 96 halfwidth characters.
Cause
The saving target path of data for fault investigation has not been set correctly. Message appears when drive or folder does not exist is specified.
Resolution
Set the correct folder name.
Cause
The drive name only is specified in the saving target path of data for fault investigation.
Resolution
Input folder name in the saving target path of data for fault investigation (full path).
Cause
Characters not allowed are used in the saving target path folder of data for fault investigation.
Resolution
Input with the allowed characters again.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Input it correctly.
Cause
The saving target path folder of data for fault investigation has not been input.
Resolution
Input the saving target path of data for fault investigation.
Cause
The path name of the saving target path folder of command line log for log viewing is too long.
Resolution
Specify the path within 96 halfwidth characters.
Cause
The saving target path folder of command line log for log viewing has not been set correctly. Message appears when drive or folder that does not exist is specified.
Resolution
Set the correct folder name.
Cause
The drive name only is specified in the saving target path folder of command line log for log viewing.
Resolution
Input the folder name of the saving target path folder of command line log for log viewing (full path).
Cause
Characters not allowed are used in the saving target path folder of command line log for log viewing.
Resolution
Input with the allowed characters again.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Input it correctly.
Cause
The saving target path folder of command line log for log viewing has not been input.
Resolution
Input the saving target path folder of command line log for log viewing.
Cause
The path name of the saving target path folder of attached data for log viewing is too long.
Resolution
Specify the path within 96 halfwidth characters.
Cause
The saving target path folder of attached data for log viewing has not been set correctly. A drive or folder that does not exist is specified.
Resolution
Set the correct folder name.
Cause
The drive name only is specified in the saving target path folder of attached data for log viewing.
Resolution
Input the folder name of the saving target path folder of attached data for log viewing (full path).
Cause
Characters not allowed are used in the saving target path folder of attached data for log viewing.
Resolution
Input with the characters allowed again.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Input it correctly.
Cause
The saving target path folder of E-mail content for log viewing has not been input.
Resolution
Input the saving target path folder of E-mail content.
Cause
The path name of the saving target path folder of E-mail content for log viewing is too long.
Resolution
Specify the path within 96 halfwidth characters.
Cause
The saving target path of E-mail content for log viewing has not been set correctly. A drive or folder that does not exist is specified.
Resolution
Set the correct folder name.
Cause
The drive name only is specified in the saving target path of E-mail content for log viewing.
Resolution
Input the folder name of the saving target path folder of E-mail content for log viewing (full path).
Cause
Characters not allowed are used in the saving target path folder of E-mail content for log viewing.
Resolution
Input with the allowed characters again.
Cause
In the drive name, drive other than the hard disk the computer brings is specified.
Resolution
Input it correctly.
Cause
The saving target path of E-mail content for log viewing has not been input.
Resolution
Input the saving target path of E-mail content for log viewing.
Cause
The specified receiving data saving target path and saving target path for log viewing are the same folder.
Resolution
The receiving data saving target path cannot be specified as the same folder as the saving target path for log viewing.
Specify other folder.
Cause
The receiving data saving target path cannot be specified as the same folder as the saving target path for log viewing.
Resolution
The receiving data saving target path cannot be specified as the same folder as the saving target path for log viewing.
Specify other folder.
Cause
The receiving data saving target path cannot be specified as the same folder as the saving target path for log viewing.
Resolution
The receiving data saving target path cannot be specified as the same folder as the saving target path for log viewing.
Specify other folder.
Cause
The input E-mail address is incorrect.
Resolution
Input the correct E-mail address.
Cause
In each output CSV file specifying window, the output file name has not been input.
Resolution
Input the output file name.
Cause
In each output CSV file specifying window, the input format of the output file is incorrect.
Resolution
Input drive name, path name and file name correctly.
Cause
In each output CSV file specifying window, characters not allowed are used in the output file name.
Resolution
Input with the allowed characters.
Cause
Failed to open the output file.
Resolution
Confirm whether the output file is correct and then execute again.
Cause
The result log file has not been input.
Resolution
Input the result log file.
Cause
The output file and the result log file are specified with the same file name.
Resolution
Specify different file names for the output file and the result log file.
Cause
In each CSV result log file specifying window, the input format of the output file is incorrect.
Resolution
Input the drive name, path name and file name correctly.
Cause
In each CSV result log file specifying window, characters not allowed are used in the result log file name.
Resolution
Input with the allowed characters.
Cause
Failed to open the result log file.
Resolution
Confirm whether the specified path is correct and then execute again.
Cause
The import file name has not input in the import file specifying window.
Resolution
Input the import file name.
Cause
The input format of the import file path and file name in the import file specifying window is incorrect.
Resolution
Input the drive name, path name and file name.
Cause
In the import file specifying window, characters not allowed are used in the import file name.
Resolution
Input with the allowed characters.
Cause
Failed to open the import file.
Resolution
Confirm whether the specified path is correct and then execute again.
Cause
The import file and the result log file are specified with the same file name.
Resolution
Specify different file names for the import file and the result log file.
Cause
The total length of the file path name and file name you selected might be too long. So when importing, the part in halfwidth and exceeding 218 characters will be deleted.
Resolution
Confirm the input file name. Specify the total length of the selected folder name and file name within 218 halfwidth characters.
Cause
The total length of the file path name and file name you selected might be too long. So when importing, the part exceeding 218 halfwidth characters will be deleted.
Resolution
Confirm the input file name. Specify the total length of the selected folder name and file name within 218 halfwidth characters.
Cause
The total length of the file path name and file name you selected might be too long. So when importing, the part exceeding 218 halfwidth characters will be deleted.
Resolution
Confirm the input file name. Specify the total length of the selected folder name and file name in halfwidth and within 218 characters.
Variable Information
%d: specifying range of number of characters in the export file
Cause
In the export file specifying window, the input byte length of the output file name has exceeded 218 halfwidth characters.
Resolution
Set the output file name within 218 halfwidth characters.
Variable Information
%d: specifying range of number of characters in the import file
Cause
In the import file specifying window, the input byte length of the output file name has exceeded 218 halfwidth characters.
Resolution
Set the import file name within 218 halfwidth characters.
Variable Information
%d: specifying range of number of characters in the result log file
Cause
In the result log file specifying window, the input byte length of the output file name has exceeded 218 halfwidth characters.
Resolution
Set the result log file name within 218 halfwidth characters.
Variable Information
%1: the output file name
Cause
It might be caused by the following.
The output target path folder is writable-prohibited
The capacity of the output target path drive is insufficient
Resolution
Execute again after eliminating the causes above.
Cause
This error is displayed when 'Prohibited log and detection' is not entered.
Resolution
Enter values in these items.
Cause
This error is displayed when 'Operations while depleting the area' is not entered.
Resolution
Enter value in these items.
Cause
This error is displayed when the 'CT monitoring' is not entered.
Resolution
Enter values in these items.
Cause
Characters that are not allowed (control characters) are entered in the title (subject) of the email.
Resolution
Enter the characters that are allowed in the title (subject) of the email.
Cause
Probable causes are as follows:
Characters other than numbers, alphabets (A - F, a - f), full stop (.), comma (,) are entered in the server IP address.
Characters other than halfwidth alphanumeric characters (A-Z,a-z,0-9) and the halfwidth hyphen (-) are entered in the server name.
The server name consists of only numbers.
The length of the entered server name is more than 15 characters.
Resolution
Enter the correct IP address or server name.
Cause
The IPv6 address is entered on the Operating System that IPv6 address is not supported.
Resolution
Enter the IPv4 address or the server name.
Cause
Port number (Management server/Operation database) is not entered.
Resolution
Enter the Port number (Management server/Operation database)
Cause
A value not in the range of 1024 to 49151 is entered in the Port number (Management server/Operation database).
Resolution
Enter a value within the range 1024 to 49151.
Cause
Port number (Management server/log reading database) is not entered.
Resolution
Enter the Port number (Management server/log reading database).
Cause
A value not in the range 1024 to 49151 is entered in the Port number (Management server/log reading database).
Resolution
Enter a value within the range 1024 to 49151.
Cause
A value similar to the Port number of the iOS Management database is entered.
Resolution
Enter a number different from the Port number of the iOS Management database.
Cause
NetBIOS name is not entered.
Resolution
Enter the NetBIOS name.
Cause
Characters that cannot be used for NetBIOS name are used. The characters that can be used are halfwidth alphanumeric characters and the following symbols.
(` ~ ! @ # $ % ^ & ( ) _ - { } [ ] ' . /)
Resolution
Use only the allowed characters.
Cause
The email address includes the characters that are not allowed.
Resolution
Use only the allowed characters.
Cause
The port number (CT/Secure communication service) has not been specified.
Resolution
Specify the port number (CT/Secure communication service).
Cause
A port number (CT/Secure communication service) other than 0 to 65535 has been specified.
Resolution
Specify a value within 0-65535.
Cause
The port number (CT/Secure communication service (registration)) has not been specified.
Resolution
Specify the port number (CT/Secure communication service (registration)).
Cause
A value other than 5001 to 60000 has been specified for the port number (CT/Secure communication service (registration)).
Resolution
Specify a value within 5001-60000.
Cause
-
Resolution
Click the [OK] button.
Cause
-
Resolution
Click the [OK] button.
Cause
-
Resolution
Click the [OK] button.
Cause
-
Resolution
Click the [OK] button.
Cause
The system will get trace log.
Resolution
To continue, click the [OK] button. To cancel, click the [Cancel] button.
Cause
The system will update database connection information settings.
Resolution
To continue, click the [OK] button. To cancel, click the [Cancel] button.
Cause
The system will update the administrator notification settings.
Resolution
To update, click the [OK] button. To cancel, click the [Cancel] button.
Cause
The system will update Management Server.
Resolution
To continue, click the [OK] button. To cancel, click the [Cancel] button.
Cause
The system will update folder/CT self-version upgrade settings.
Resolution
To continue, click the [OK] button. To cancel, click the [Cancel] button.
Variable Information
%s: name of the file to be overwritten and saved, and this file exists already
Cause
Overwrite the existing file and save the new file.
Resolution
To continue, click the [OK] button. To cancel, click the [Cancel] button.
Cause
The system will export the installation settings file.
Resolution
To continue, click the [OK] button. To cancel, click the [Cancel] button.
Cause
The system will add node information.
Resolution
Decide whether to add.
Cause
The system will update node information.
Resolution
Decide whether to update.
Cause
The system will delete node information.
Resolution
Decide whether to delete.
Cause
The system will add user information.
Resolution
Decide whether to add.
Cause
The system will update the user information.
Resolution
Decide whether to update.
Cause
The system will delete the user information.
Resolution
Decide whether to delete.
Cause
Confirmation of password changing.
Resolution
-
Cause
Local node has not been registered. Local node has to be registered for making the function of the server operate normally.
Resolution
Close the window after registering local node. Besides, when registering local node later, close the window directly.
Cause
When registering the server classification of local node as "Sub-Level Server", there is one record of other node. Other node need to be registered for making the server function operate normally.
Resolution
Select "Root Server" in server classification to register another node, and then close the window. Besides, close the window directly when logon to other node later.
Cause
When the category of local node is "Sub-Level Server", set the category of other node as "Root Server". To make server function operate well, other illegal node should be deleted.
Resolution
Close the window after deleting other illegal node. When logging on to other node later, close the window directly.
Cause
When performing data migration, records with incorrect data status are acquired.
Resolution
After one record whose server category is "Root Server" is reserved, close this window. Besides, when logging on to another node later, close the window directly.
Cause
Try modifying Active Directory Linkage settings, and update the system settings. Active Directory Linkage, after changing the setting from "Not perform" to "Perform",, the operation of Management Server will change a lot. For example: the information of sub-level Management Server will be replaced as the information of Master Management Server.
Resolution
To update, click the [OK] button. To cancel, click the [Cancel] button.
Cause
Intend to update the domain information.
Resolution
To update, click the [OK] button. To cancel, click the [Cancel] button.
Cause
Intend to delete the domain information.
Resolution
To delete, click the [OK] button. To cancel, click the [Cancel] button.
Cause
When "Perform SMTP Authentication" is not selected, intend to update administrator notification settings.
Resolution
To update, click the [OK] button. To cancel, click the [Cancel] button.
Cause
Intend to delete the user information.
Resolution
To delete, click the [OK] button. To cancel, click the [Cancel] button.
Variable Information
%s: record classification with exclusion settings performed
Cause
The records with record classification displayed are performed exclusion settings.
Resolution
When performing the exclusion settings, click the [OK] button. To cancel, click the [Cancel] button.
Variable Information
%s: record classification with exclusion status removed
Cause
The exclusion status of record with record classification displayed is removed.
Resolution
When removing the exclusion status, click the [OK] button. To cancel, click the [Cancel] button.
Cause
Intend to add the domain information.
Resolution
To add, click the [OK] button. To cancel, click the [Cancel] button.
Cause
Intend to update the domain information.
Resolution
To update, click the [OK] button. To cancel, click the [Cancel] button.
Cause
Update the system settings, continue?
Resolution
To update, click the [OK] button. To cancel, click the [Cancel] button.
Cause
Modify the settings of Active Directory Linkage, and prepare performing system settings updating. When modifying Active Directory Linkage from "Yes" to "No", the domain information set in the "Active Directory Linkage Settings" window will all be deleted. After deleting the domain information, computers linking with this domain will not be managed by this domain. Besides, the department administrator, user information and composition information will be deleted.
Resolution
To update, click the [OK] button. To cancel, click the [Cancel] button.
Cause
After deleting the access authority of department administrator, intend to update user information.
Resolution
To continue, click the [OK] button. To cancel, click the [Cancel] button.
Cause
In the E-mail recipient settings window, after clicking the [Settings] button, click the [Cancel] button in the administrator notification settings window.
Resolution
To continue, click the [OK] button. To cancel, click the [Cancel] button.
Variable Information
%1: exported file name
Cause
The existing exported file has been specified.
Resolution
To overwrite, click the [OK] button. To cancel, click the [Cancel] button.
Cause
The mail title (subject) settings are to be done.
Resolution
For continuing, click the OK button. When you want to stop the processing, click the Cancel button.
Cause
Failed to send inquiry to domain controller, so the computer name and domain name and NetBIOS name you input cannot be checked.
It might be caused by the following.
The input domain name is incorrect.
DNS settings in network settings of the Management Server are incorrect.
Network name resolution has not been performed.
Resolution
When adding the input computer name, domain name, and NetBIOS name to the domain information, click the [OK] button. To cancel, click the [Cancel] button.
Cause
Failed to send inquiry to domain controller, so the computer name, domain name, and NetBIOS name you input cannot be checked. It might be caused by the following.
The input domain name is incorrect.
DNS settings in network settings of the Management Server are incorrect.
Network name resolution has not been performed.
Resolution
While changing the domain information in the entered Computer name, Domain name, NetBIOS name, click OK. When you want to stop processing, click the Cancel button.
Variable Information
%s: the actual computer name correspondent with the input domain address
Cause
When inquiring the domain address the user input on the Internet, the inquired computer name is different from that input by the user. This might be caused by the following.
The input computer name is incorrect.
Active Directory Server consists of multiple ones, the result of the accessed server is different from the computer name input by the user.
Resolution
When updating the domain information according to the input computer name and domain name, NetBIOS name, click the [OK] button. To cancel, click the [Cancel] button.
Variable Information
%s: the actual computer name correspondent with the input domain address
Cause
When inquiring the input domain address on the Internet, the inquired computer name is different from that input by the user. This might be caused by the following.
The input computer name is incorrect.
Active Directory Server consists of multiple ones, the result of the accessed server is different from the computer name input by the user.
Resolution
If the input computer name is incorrect, input correctly. Besides, in the case of the computer name specified, Active Directory Linkage command will access data in the inputting computer.
If there are multiple Active Directory Servers, and it is OK to access all Active Directory Servers, logon without inputting in the computer name. If the computer name is blank, Active Directory Linkage command will confirm the computer name automatically and access data during execution.
When updating, click the OK button. To cancel, click the Cancel button.
Variable Information
%1: NetBIOS name on the network
Cause
Attempted to add the NetBIOS name.
Resolution
Click the OK button when you want to add. Click the Cancel button when you want to stop the processing.
Variable Information
%1: NetBIOS name on the network
Cause
Attempted to update the NetBIOS name.
Resolution
Click the OK button when you want to update. Click the Cancel button when you want to stop the processing.
Variable Information
%1: NetBIOS name on the network
Cause
Attempted to add the NetBIOS name.
Resolution
Click the OK button when you want to add. Click the Cancel button when you want to stop the processing.
Variable Information
%1: NetBIOS name on the network
Cause
Attempted to update the NetBIOS name.
Resolution
Click the OK button when you want to update. Click the Cancel button when you want to stop the processing.
Cause
Attempted to update the CT auto-version number upgrade setting.
Resolution
When you want to upgrade the auto-version of Windows 8.1 or Windows 10, it is necessary to restart the system.
Force shut down the system or display the Restart confirmation screen and prompt the general users to restart the system.
Cause
Attempted to create an installation settings file.
Resolution
When you want to upgrade the auto-version of Windows 8.1 or Windows 10, it is necessary to restart the system.
Force shut down the system or display the Restart confirmation screen and prompt the general users to restart the system.
Cause
The initial value that was set while installing the password is as it is.
Resolution
Change the password according to the displayed method.
Cause
Reconfirmation for executing the database construction processing.
Resolution
Click Yes to execute the database construction processing, click No to return to the Home screen.
Cause
Reconfirmation to execute the deletion process.
Resolution
Click Yes to execute the deletion process, click No to return to the Home screen.
Cause
Reconfirmation for executing the database construction processing.
Resolution
Click Yes to execute the database construction processing, click No to return to the Home screen.
Cause
Reconfirmation to execute the deletion process.
Resolution
Click Yes to execute the deletion process, click No to return to the Home screen.
Cause
Reconfirmation for executing the database construction processing.
Resolution
Click Yes to execute the database construction processing, click No to return to the Home screen.
Cause
Reconfirmation to execute the deletion process.
Resolution
Click Yes to execute the deletion process, click No to return to the Home screen.
Cause
Displayed when the database construction is successful.
Resolution
-
Cause
Displayed when the database construction is successful.
Resolution
-
Variable Information
%1: Full path of the folder for creating the iOS Management database.
Cause
The Systemwalker Desktop Patrol constructs the iOS management database.
The iOS management database is used in both Systemwalker Desktop Keeper and Systemwalker Desktop Patrol.
Resolution
Resolution is not necessary to end the process normally.
Cause
The Systemwalker Desktop Patrol constructs the iOS management database.
In this case, Systemwalker Desktop Keeper will only stop the usage of iOS management database.
Delete the iOS management database in the Systemwalker Desktop Patrol.
Resolution
Resolution is not necessary to end the process normally.
Cause
An error occurs during the construction processing and the database construction fails.
Resolution
Refer to the application log and remove the cause of the error.
(Application log creating location:%PROGRAMDATA%\Fujitsu\Systemwalker Desktop Keeper\fsw61ej1.log, <Installation folder for the database connection file>\DBEnv\swss_MDMDB_ENV.log )
Cause
An error occurs during the deletion processing and the database construction fails.
Resolution
Refer to the application log and remove the cause of the error.
(Application log creating location:%PROGRAMDATA%\Fujitsu\Systemwalker Desktop Keeper\fsw61ej1.log)
Cause
The specified database creation destination is incorrect.
Resolution
Specify the correct folder in the database creation destination.
Cause
The disk space of the database creation destination is insufficient.
Resolution
Increase the disk space or specify another drive in this case.
Cause
The database creation destination path is already used by some other database creation destination.
Resolution
Change the path so that it does not duplicate with some other database creation destination.
