This manual outlines the functions and operation of the Web-Based Admin View. Web-Based Admin View is a common base to utilize GUI (operation management view) with PRIMECLUSTER, and is provided along with each operation management product.
Target Readers
This manual is intended for all the users operating the products with Web-Based Admin View (e.g. PRIMECLUSTER.)
Organization
This manual consists of five parts, Appendices, and glossary. The content of each category is described below. When you use this product for the first time, be sure to read Part 1 first, and then work on the necessary operations.
Describes the functions and topology of the Web-Based Admin View.
Describes how to operate the GUI screen.
Details the functions provided as the Web-Based Admin View tools menu.
Details the operation method (e.g. shut-down, restart) and modifies the original settings.
Describes the notes on Web-Based Admin View.
Explains the message texts and corrective actions.
Explains how to take corrective actions in the event of a failure and collect required data for the request of troubleshooting.
Describes the procedure for setting Java policy.
Describes the changes in this manual.
This part defines the terms and expounds the meaning of each technical term. Refer to this part if necessary.
Related documentation
The documents listed in this section contain information relevant to Web-Based Admin View and may be ordered through your sales representative. Before beginning to work with Web-based Admin View, read the following document:
PRIMECLUSTER Concepts Guide
PRIMECLUSTER Installation Guide
PRIMECLUSTER Software Release Guide
PRIMECLUSTER Cluster Foundation (CF) Configuration and Administration Guide
PRIMECLUSTER Reliant Monitor Services (RMS) with Wizard Tools Configuration and Administration Guide
PRIMECLUSTER Scalable Internet Service (SIS) Configuration and Administration Guide
PRIMECLUSTER Installation and Administration Guide
PRIMECLUSTER Messages
PRIMECLUSTER Global Disk Services Configuration and Administration Guide
PRIMECLUSTER Global File Services Configuration and Administration Guide
PRIMECLUSTER Global Link Services Configuration and Administration Guide: Redundant Line Control Function
Information
Your sales representative will need your operating system release and product version to place your order.
Manual Printing
Use the PDF file supplied in a DVD for each product to print this manual.
Adobe Reader is required to read and print this PDF file. To get Adobe Reader, see Adobe Systems Incorporated's website.
Notational Conventions
This document adopts the following notational conventions.
Command line examples that require system administrator (or root) rights to execute are preceded by the system administrator prompt, the hash sign (#). Entries that do not require system administrator rights are preceded by a dollar sign ($).
References to the UNIX operating system commands are followed by their manual page section numbers in parentheses __ for example, cp(1).
Keystrokes that represent nonprintable characters are displayed as key icons such as [Enter] or [F1]. For example, [Enter] means press the key labeled Enter; [Cntl]+[B] means hold down the key labeled Cntl or Control and then press the [B] key.
The following typefaces highlight specific elements in this manual.
Typeface / Symbol | Usage |
|---|---|
Constant Width | Computer output and program listings; commands, file names, manual page names and other literal programming elements in the main body of text. |
Italic, <Italic> | Variables that you must replace with an actual entered value. |
<Constant Width> | Variables that you must replace with an actual displayed value. |
Bold | Items in a command line that you must type exactly as shown. |
"Constant Width" | The title, documentation, screen, and etc of lookup destination. |
[Constant Width] | Tool bar name, menu name, command name, button name, and icon names |
Several entries from an /etc/passwd file are shown below:
root:x:0:1:0000-Admin(0000):/:
sysadm:x:0:0:System Admin.:/usr/admin:/usr/sbin/sysadm
setup:x:0:0:System Setup:/usr/admin:/usr/sbin/setup
daemon:x:1:1:0000-Admin(0000):/:
To use the cat(1) command to display the contents of a file, enter the following command line:
$ cat <file name>
Material of particular interest is preceded by the following symbols in this manual:
Point
Describes the contents of an important point.
Note
Describes the points the users should pay close attention to.
Example
Gives some examples for users' clear understanding.
Information
Provides useful information related to the topic.
See
Provides manuals for users' reference.
Windows(R) Vista(R) Business operating system is abbreviated as Windows(R) Vista.
Windows(R) 7 Professional operating system is abbreviated as Windows(R) 7.
Windows(R) 8 Pro, Windows(R) 8 Enterprise, Windows(R) 8.1 Pro, and Windows(R) 8.1 Enterprise are abbreviated as Windows(R) 8.
Windows(R) 10 Pro and Windows(R) 10 Enterprise are abbreviated as Windows(R) 10.
Windows Vista(R), Windows(R) 7, Windows(R) 8, and Windows(R) 10 are abbreviated as Windows.
Oracle Solaris might be described as Solaris, Solaris Operating System, or Solaris OS.
Red Hat Enterprise Linux is abbreviated as RHEL.
RHEL is abbreviated as Linux(R).
Export Controls
Exportation/release of this document may require necessary procedures in accordance with the regulations of your resident country and/or US export control laws.
Trademarks
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.
Microsoft, Windows, WindowsVista, and Internet Explorer are registered trademarks of Microsoft Corporation in the United States and other countries.
All other trademarks are the properties of their respective owners.
Screen images are used in accordance with the guidelines of Microsoft Corporation.
Red Hat is a registered trademark of Red Hat, Inc. in the U.S. and other countries.
Linux is a registered trademark of Linus Torvalds.
PRIMECLUSTER is a registered trademark of Fujitsu Limited.
Other product names are product names, trademarks, or registered trademarks of these companies.
No part of this document may be reproduced or copied without permission of FUJITSU LIMITED.
The contents of this document may be revised without prior notice.
Date of publication and edition
November 2015, Sixteenth edition |
Copyright notice
All Rights Reserved, Copyright (C) FUJITSU LIMITED 2006-2018.
Revision | Location | Edition |
|---|---|---|
Changed the description of corrective action when an unstarted process exists. | Symptom 1, Symptom 4, Symptom 8, and Symptom 16 of B.1 Corrective action | 16.1 |
Deleted Corrective action No 2. | Symptom 10 of B.1 Corrective action | |
Deleted the description of single architecture model. | 1.2.2 System topology | 16.2 |
Changed the note. | 3.1.2 Prerequisite client environment | |
Added the note. | 3.2 Screen startup | |
Changed the procedure to change the language settings. | 3.5.1 Tentative modification of screen display settings (Language, Look &Feel) | |
Changed the setting value of out-time and added the contents of the note. | 4.5.1 Environment variable | |
Changed the description of how to change the IP address. | 7.1 Network address | |
Changed the description of "Setup by command." | 7.3 Management server | |
Changed the description of corrective action. | Symptom 1, Symptom 4, Symptom 8, and Symptom 16 of B.1 Corrective action | |
Changed the descriptions of Java console display. | B.2.2 Java console |
