Description
There is not enough free space on the /tmp file system.
Workaround
Reserve at least TMP_LEASTKB on the /tmp file system then execute the command again.
Description
Creation of a temporary file in /temp failed.
Workaround
After /temp is made writable, execute the command again.
Example: If the file system including /temp is mounted as a read-only file system, make /temp writable by executing "mount -o remount <mount point of the file system including /tmp>".
Description
There is not enough free space on the /var file system.
Workaround
Reserve at least VAR_LEASTKB on the /var file system then execute the command again.
Description
The command </usr/sbin/dmidecode> not installed on the system.
Workaround
Check if the OS is installed with a right procedure.
Description
The CF driver is loaded.
Workaround
Unload the CF driver then execute the command again. For details, see "PRIMECLUSTER Cluster Foundation Configuration and Administration Guide".
Description
Installation of FJQSS failed.
Workaround
Collect the following information then contact your Fujitsu system engineers.
- /tmp/fjqssinstaller.log
Description
The rpm command failed. ( "*" indicates the error details.)
Workaround
Remove the cause of the error referring to the log file then execute the command again.
Description
An internal error occurred. ( "*" indicates the error details.)
Workaround
Put down the message then contact your Fujitsu system engineers.
Description
This software is not supported.
Workaround
Check if the environment meets operating conditions as prescribed in "Chapter 2 Operation Environment". If there is nothing wrong with the environment, put down the message then contact your Fujitsu system engineers.
Description
Installation of the product set <PROD> is not supported for this software.
Workaround
Check if the command option is correct. If it is, then check if the environment meets operating conditions as prescribed in "Chapter 2 Operation Environment". If there is nothing wrong with the environment, put down the message then contact your Fujitsu system engineers.
Description
The products <PROD1> and <PROD2> are included in the same package <PKG>, so they cannot be installed at the same time.
Workaround
An option cannot be specified for the products <PROD1> and <PROD2>.
Description
An incorrect option was specified.
Workaround
Correct the option then execute the command again.
Description
An incorrect option was specified.
Installation of the product set <PSET> is not supported for this software.
Workaround
Check if the command option is correct. If it is, check whether the environment meets operating conditions as prescribed in "Chapter 2 Operation Environment".
Description
The installation of <PackageName> failed. You may have tried to install in the kernel version of OS not supported.
Workaround
Please confirm whether there is required patch of PRIMECLUSTER corresponding to the kernel version of OS. If the patch is existing, please apply the patch and execute "rpm -V --nodigest --nofiles --noscripts --nosignature <PackageName >" afterwards. When nothing is output, it means the execution of the CLI installer succeeded. Please perform the subsequent procedure.
If the above action fails to solve the problem, put down the message then contact your Fujitsu system engineers.
Description
The other installation process is running.
Workaround
Wait until the other installation process is completed then execute the command again.
Note
If this message appears although the other installation process is not being executed, delete the "/tmp/cluster_install" and "/tmp/cluster_uninstall" flag files then execute the command again.
Description
The command was executed by a non-root user.
Workaround
Execute the command using root user access privileges.
Description
Installation failed.
Workaround
Remove the cause of the problem referring to the error message and log file then execute the command again.
Description
See the /var/log/install/cluster_install log file.
Workaround
Remove the cause of the error referring to the log file then execute the command again.
