When cloning the system of GS/SURE linkage mode, the following IP addresses must be changed on the copy destination system.
Virtual interface
Virtual gateway
Remote host (when the destination host is different)
Takeover virtual interface (for cluster system)
Before cloning the system, see the following examples to decide the IP address to be assigned to the copy destination system.
Below is the design example of how to clone HOST-A of "B.7.1 Example of the Single system in GS/SURE connection function (GS communication function)."
IP address to be changed | Value in copy source | Value in copy destination | ||
|---|---|---|---|---|
HOST-A | Virtual interface | sha0 | 192.168.80.1 | 192.168.180.1 |
Virtual gateway | 192.168.80.254 | 192.168.180.254 | ||
Virtual interface | sha1 | 192.168.70.1 | 192.168.170.1 | |
sha2 | 192.168.71.1 | 192.168.171.1 | ||
GS-1 | Virtual IP address | Virtual IP | 192.168.81.2 | 192.168.181.1 |
Real IP address | IP-1 | 192.168.70.2 | 192.168.170.2 | |
IP-2 | 192.168.71.2 | 192.168.171.2 | ||
Below is the design example of how to clone HOST-A and HOST-B of "B.7.5 Example of the Cluster system in GS/SURE connection function (GS communication function)."
IP address to be changed | Value in copy source | Value in copy destination | ||
|---|---|---|---|---|
HOST-A | Virtual interface | sha0 | 192.168.80.1 | 192.168.180.1 |
Virtual gateway | 192.168.80.254 | 192.168.180.254 | ||
Virtual interface | sha1 | 192.168.70.1 | 192.168.170.1 | |
sha2 | 192.168.71.1 | 192.168.171.1 | ||
HOST-B | Virtual interface | sha0 | 192.168.80.1 | 192.168.180.1 |
Virtual gateway | 192.168.80.254 | 192.168.180.254 | ||
Virtual interface | sha1 | 192.168.70.2 | 192.168.170.2 | |
sha2 | 192.168.71.2 | 192.168.171.2 | ||
Takeover virtual interface | sha0:65 | 192.168.80.1 | 192.168.180.1 | |
GS-1 | Virtual IP address | Virtual IP | 192.168.81.3 | 192.168.181.3 |
Real IP address | IP-1 | 192.168.70.3 | 192.168.170.3 | |
IP-2 | 192.168.71.3 | 192.168.171.3 | ||
