The explanation of the installation parameters described below.
Parameter Name | Description | Default Value |
|---|---|---|
Installation_function | When installing ETERNUS SF Manager, set to [1]. | 1 |
ETERNUS_SF_Manager_apache_service | Web Console service port number (*4) | 9855 |
Communications_service_1 | Communications service 1 port number (*4) | 1226 |
Communications_service_2 | Communications service 2 port number (*4) | 4917 |
Repository_service | Repository service port number (*4) | 15432 |
Internal_port_1 | Port numbers for various internal services (*4) | 28005 |
Internal_port_2 | 28009 | |
Internal_port_3 | 28443 | |
Internal_port_4 | 24916 | |
Internal_port_5 | 24917 | |
Management_server_IP_address | Management Server IP address (*1) (*3) | None |
esfpostgres_UID | User ID which ETERNUS SF Manager internally uses on installation of PRIMECLUSTER (*2) | None |
StartService | Automatic service activation of ETERNUS SF Manager |
|
*1: When the Management Server has two or more IP addresses, specify the IP address which is available for communicating with the Management Server from all of the AdvancedCopy Manager's agents.
*2: On installation in PRIMECLUSTER environments, specify an unregistered user ID for the system by using integer number from 100 to 59999. Specify a blank in other cases.
*3: Specify the IPv4 address confirmed with "3.1.6 IP Address Confirmation". Specify the IPv4 address when operating the Management Server with both IPv4 and IPv6 or when operating the Management Server with IPv6 only. Add and change the IPv6 address after installation is complete, referring to "4.4.5 Updating Management Server IP Address Information".
*4: When changing a port number, specify an unused port number. Values between 1024 and 65535 are valid.
Point
Only LF is permitted for linefeed code. Do not use CR+LF or CR.
Do not use double-byte character such as double-byte space.
