The following is a description of installation parameters.
Parameter Name | Description | Default Value |
|---|---|---|
Program_directory | Program directory (*4) | C:\ETERNUS_SF |
Environment_directory | Configuration directory (*4) | C:\ETERNUS_SF |
Work_directory | Working directory (*4) | C:\ETERNUS_SF |
Management_server_IP_address | IP address of Management Server (*1, *2) | None |
Start_Service | Automatic service activation of ETERNUS SF Manager |
|
Web_service | Port number for Web Console service (*3) | 9855 |
Communications_service_1 | Port number for communication service1 (*3) | 1226 |
Communications_service_2 | Port number for communication service2 (*3) | 4917 |
Repository_service | Port number for repository service (*3) | 15432 |
Internal_port_1 | Communication port number for internal use (*3) | 28005 |
Internal_port_2 | 28009 | |
Internal_port_3 | 28443 | |
Internal_port_4 | 24916 |
*1: If the Management Server has multiple IP addresses, specify IP addresses available for communication between the Management Server and all of the AdvancedCopy Manager's agents.
*2: Specify the IPv4 address confirmed in the "3.1.6 IP Address Confirmation" section to do pre-installation work. When using both IPv4 and IPv6 addresses for the Management Server or even when using only IPv6, specify IPv4 address. On completion of installation, refer to "4.4.5 Updating Management Server IP Address Information" to add or change IPv6 address.
*3: When changing a port number, specify an unused port number. Values between 1024 and 65535 are valid.
*4: Do not specify the following for directory:
Shared directory
Characters " | : * ? / . < > , % & ^ = ! ; # ' @ ( ) + are not supported for directory name.
The number of characters specifiable for directory name is 4 to 70.
Do not specify the directory with a relative path. Specify it with an absolute path.
Point
Only CR+LF is available for linefeed code. Do not use CR or LF.
Do not use 2-byte characters such as double-byte space.
Note
With ETERNUS SF Manager, Internal Port 5 is the communication port number used internally. In the Windows environment, it is not possible to specify Internal Port 5 in the installation parameter file.
When changing the port number for Internal Port 5, in advance on the Servers for installation, edit the %SystemRoot%\system32\drivers\etc\services file manually, and define the following service name and unused port number in the range 1024-65535.
Service Name | Port Number / Protocol | Used Purpose |
|---|---|---|
astm | 24917/tcp | This is used for the following purpose. |
