Top
PRIMECLUSTER Global File Services Configuration and Administration Guide 4.5
FUJITSU Software

A.1.2 Warning messages

This sub-section describes the AC Warning messages of the GFS Shared File System.

WARNING: FSP_PCLGFS_SFXFSKNL: 1002: mountpoint: Blockade start: details

Explanation

The close processing of the file system (mountpoint) is initiated. See detailed information in details.

Response

None.

WARNING: FSP_PCLGFS_SFXFSKNL: 1003: mountpoint: Blockade end

Explanation

The close processing of the file system (mountpoint) is terminated. The file system will be unavailable.

Response

Collect a file output with FJQSS or fjsnap for troubleshooting information then contact field engineers.

Unmount the file system on the node where the message is output.

WARNING: FSP_PCLGFS_SFXFSKNL: 1103: mountpoint: Cannot mount: Invalid argument: details

Explanation

An error is detected when mount(2) of the file system (mountpoint) is specified. See detailed information in details. Mounting of the file system fails.

Response

Display the partition information by executing the fstyp_sfcfs(1M) with the -v option then check that the file system configuration is correct. If the information is incorrect, reconfigure the file system. If it is correct, collect troubleshooting information with FJQSS or fjsnap then contact field engineers.

WARNING: FSP_PCLGFS_SFXFSKNL: 1104: mountpoint: Cannot mount: Connection failed: details

Explanation

Connection to MDS failed. See detailed information in details. Mounting of the file system fails.

Response

Check the following points:

  • Check the network connection state with the node where MDS runs.

  • Check whether the IP address of the node where MDS runs is correctly registered in host database (for example: /etc/inet/hosts). For details, see "11.2.2 Registering information in host database."

  • If the AC information message "NOTICE: FSP_PCLGFS_SFXFSKNL: 2004: mountpoint: Disconnect start: details" was output before this message, check whether the IP address of this node is correctly registered in host database on the node where MDS runs.

If the problem cannot be solved after taking the above actions, collect a file output with FJQSS or fjsnap for troubleshooting information then contact field engineers.

WARNING: FSP_PCLGFS_SFXFSKNL: 1199: mountpoint: Cannot mount: details

Explanation

See detailed information in details. Mounting of the file system fails.

Response

Check /var/adm/messages on the node where MDS is running. If there are any warning message output by MDS, take corrective action according to them. Also, check the network, node, IP address settings.

WARNING: FSP_PCLGFS_SFXFSKNL: 1201: mountpoint: HEARTBEAT timeout (xid=xid)

Explanation

A timeout occurs while waiting for a heartbeat response from MDS. The file system (mountpoint) will be unavailable.

Response

Collect a file output with FJQSS or fjsnap for troubleshooting information then contact field engineers.

WARNING: FSP_PCLGFS_SFXFSKNL: 1301: mountpoint: Protocol error: details

Explanation

An illegal message was received during communication with MDS of the file system (mountpoint). See detailed information in details. The file system (mountpoint) will be unavailable.

Response

Collect a file output with FJQSS or fjsnap for troubleshooting information then contact field engineers.

WARNING: FSP_PCLGFS_SFXFSKNL: 1401: mountpoint: Recovery failed: details

Explanation

Recovery of MDS of the file system (mountpoint) failed. See detailed information in details. The file system (mountpoint) will be unavailable.

Response

Check the following points:

  • Check the network connection state with the node where MDS runs.

  • Check whether the IP address of the node where MDS runs is correctly registered in host database (for example: /etc/inet/hosts). For details, see "11.2.2 Registering information in host database."

  • If the AC information message "NOTICE: FSP_PCLGFS_SFXFSKNL: 2004: mountpoint: Disconnect start: details" was output before this message, check whether the IP address of this node is correctly registered in host database on the node where MDS runs.

If the problem cannot be solved after taking the above actions, collect a file output with FJQSS or fjsnap for troubleshooting information then contact field engineers.

WARNING: FSP_PCLGFS_SFXFSKNL: 1501: mountpoint: Read error: ino=inum off=offset len=length

Explanation

Reading from the disk failed.

Response

Take action according to the instructions in "C.3.1 Action for I/O errors".

WARNING: FSP_PCLGFS_SFXFSKNL: 1502: mountpoint: Write error: ino=inum off=offset len=length

Explanation

Writing to the disk failed.

Response

Take action according to the instructions in "C.3.1 Action for I/O errors".