ServerView Resource Orchestrator Cloud Edition V3.2.0 DR Option Instruction

2.6.5 Configuration Files for Matching Details between the Switchover Source and Destination Sites

When changing the following files on the switchover source site, also change the files on the switchover destination site.
"*" in the table indicates arbitrary files in the folders.
The above changes are not necessary when no file exists in both the switchover source and destination sites.

Table 2.20 Configuration Files for Matching Details between the Switchover Source and Destination Sites [Windows Manager]

Folder	File Name
Installation_folder\SVROR\Manager\etc\customize_data\	auto_replace.rcxprop
	cli_notlist_oc.rcxprop
	gui_always_home.rcxprop
	gui_config.rcxprop
	gui_enable_reverse_proxy.rcxprop
	image_admin_hyperv.rcxprop
	image_admin_hyperv_User_Group_Name.rcxprop
	iscsi.rcxprop
	iscsi_User_Group_Name.rcxprop
	kb978336_scvmm.rcxprop
	l_server.rcxprop
	ldap_attr.rcxprop
	library_share_deny.conf
	library_share_User_Group_Name_deny.conf
	multiple_ds.rcxprop
	mwgui_config.rcxprop
	network_map.rcxprop
	network_viewer.rcxprop
	os_setting.rcxprop
	os_setting_User_Group_Name.rcxprop
	pool.rcxprop
	product_report.rcxprop
	rcxmgrctl_except_rba.rcxprop
	scvmm_mac_pool.rcxprop
	scvmm_mac_pool_Tenant_Name.rcxprop
	server_control.rcxprop
	show_vds_vc.rcxprop
	use_image_data_disk
	vdipool_group_entitlement.rcxprop
	vm.rcxprop
	vm_console.rcxprop
	vmguest_uuid_output.rcxprop
Installation_folder\SVROR\Manager\etc\customize_data\alive_monitoring\	vm_Hyper-V.rcxprop
	vm_VMware.rcxprop
Installation_folder\SVROR\Manager\etc\customize_data\home_tab\	home_infra_mes.txt
	home_tenant_mes.txt
Installation_folder\SVROR\Manager\etc\customize_data\l_server\net\	*
Installation_folder\SVROR\Manager\etc\customize_data\net\	net_info.Network_Resource_Name.conf
	net_info.L-Server_Name.conf
Installation_folder\SVROR\Manager\etc\customize_data\setup_wizard\	enable_advanced_mode.rcxprop
	lplatform_console_setup_parameter_on
Installation_folder\SVROR\Manager\etc\customize_data\sysprep_guirunonce\	*
Installation_folder\SVROR\Manager\etc\customize_data\vm_prop	vm_*.rcxprop
Installation_folder\SVROR\Manager\etc\event_handler\	*
Installation_folder\SVROR\Manager\etc\l_platform\	enable_cloning
Installation_folder\SVROR\Manager\etc\l_server\	disable_check_num_of_cpu
	enable_cpu_per_socket
Installation_folder\SVROR\Manager\etc\vm\	delete_old_image
	online_cloning
	require_image_location
	single_storage_vc
	thin_provisioning
Installation_folder\SVROR\Manager\rails\config\rcx\	vm_guest_params.rb
Installation_folder\SVROR\Manager\sys\irmctool	*
Installation_folder\SVROR\Manager\sys\usm\etc\	emcpath.conf
	fspath.conf

Table 2.21 Configuration Files for Matching Details between the Switchover Source and Destination Sites [Linux Manager]

Directory	File Name
/etc/opt/FJSVrcvmr/customize_data/	auto_replace.rcxprop
	cli_notlist_oc.rcxprop
	gui_always_home.rcxprop
	gui_config.rcxprop
	gui_enable_reverse_proxy.rcxprop
	image_admin_hyperv.rcxprop
	image_admin_hyperv_User_Group_Name.rcxprop
	iscsi.rcxprop
	iscsi_User_Group_Name.rcxprop
	kb978336_scvmm.rcxprop
	l_server.rcxprop
	ldap_attr.rcxprop
	library_share_deny.conf
	library_share_User_Group_Name_deny.conf
	multiple_ds.rcxprop
	mwgui_config.rcxprop
	network_map.rcxprop
	network_viewer.rcxprop
	os_setting.rcxprop
	os_setting_User_Group_Name.rcxprop
	pool.rcxprop
	product_report.rcxprop
	rcxmgrctl_except_rba.rcxprop
	scvmm_mac_pool.rcxprop
	scvmm_mac_pool_Tenant_Name.rcxprop
	server_control.rcxprop
	show_vds_vc.rcxprop
	use_image_data_disk
	vdipool_group_entitlement.rcxprop
	vm.rcxprop
	vm_console.rcxprop
/etc/opt/FJSVrcvmr/customize_data/alive_monitoring/	vm_Hyper-V.rcxprop
	vm_VMware.rcxprop
/etc/opt/FJSVrcvmr/customize_data/home_tab/	home_infra_mes.txt
	home_tenant_mes.txt
/etc/opt/FJSVrcvmr/customize_data/l_server/net/	*
/etc/opt/FJSVrcvmr/customize_data/net/	net_info.Network_Resource_Name.conf
	net_info.L-Server_Name.conf
/etc/opt/FJSVrcvmr/customize_data/setup_wizard/	enable_advanced_mode.rcxprop
	lplatform_console_setup_parameter_on
/etc/opt/FJSVrcvmr/customize_data/sysprep_guirunonce/	*
/etc/opt/FJSVrcvmr/customize_data/vm_prop/	vm_*.rcxprop
/etc/opt/FJSVrcvmr/event_handler/	*
/etc/opt/FJSVrcvmr/l_platform/	enable_cloning
/etc/opt/FJSVrcvmr/l_server/	disable_check_num_of_cpu
	enable_control
	enable_cpu_per_socket
/etc/opt/FJSVrcvmr/vm/	delete_old_image
	online_cloning
	require_image_location
	single_storage_vc
	thin_provisioning
/opt/FJSVrcvmr/rails/config/rcx/	vm_guest_params.rb
/opt/FJSVrcvmr/sys/irmctool	*
/opt/FJSVrcvmr/sys/usm/etc/	emcpath.conf
	fspath.conf

Information

When the rcxmgrexport command is executed, the above configuration files are output to the following switchover information storage folder:

[Windows Manager]
Switchover information storage folder\ManagerExport\CONFIG_FILEDate Exported

[Linux Manager]
Switchover information storage directory\ManagerExport\CONFIG_FILEDate Exported

Referring to the configuration file for the switchover source site, which is stored in the switchover information storage folder, during switchover, enables you to make the content of the configuration file for the switchover destination site the same as the one for the switchover source site.

For details on the switchover information folder, refer to "3.2 Creating Switchover Information Folders".

For details on the rcxmgrexport command, refer to "B.1 rcxmgrexport".

When the contents of configuration files shown below differ between sites at the switchover in the Active-Active operation, matching them is not easy.
When editing configuration files on the switchover source site, manually merge the edited contents on the switchover destination site, before switchover. For details on how to edit configuration files, see the references listed below.

Table 2.22 References for Editing Procedures of Configuration Files

Overview	File Name	Reference
Definition file for alive monitoring	Stored folder [Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data\alive_monitoring [Linux Manager] /etc/opt/FJSVrcvmr/customize_data/alive_monitoring File Name vm_VMware.rcxprop vm_Hyper-V.rcxprop	Refer to "8.1.6 Definition File for Alive Monitoring" in the "Setup Guide CE".
Editing information in the Home window of the ROR console	Stored folder [Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data\home_tab [Linux Manager] /etc/opt/FJSVrcvmr/customize_data/home_tab File Name home_infra_mes.txt home_tenant_mes.txt	Refer to "8.4 Editing Information in the [Home] Tab" in the "Operation Guide CE".
When using driver-specific parameters such as GLS or Bonding for scripts for configuring networks	Stored folder [Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data\net [Linux Manager] /etc/opt/FJSVrcvmr/customize_data/net File Name net_info.network resource name.conf net_info.l_server name.conf	Refer to "7.8 Network Redundancy and VLAN Settings of L-Servers" in the "Setup Guide CE".
[Hyper-V] Configuration file for access limitation in the image storage location	Stored folder [Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data File Name library_share_deny.conf library_share_User_Group_Name_deny.conf	Refer to "8.3.8 Collecting and Deleting Cloning Images" in the "Setup Guide CE".
[Hyper-V] For specification of the VM guest administrator account when L-Servers are created by specifying an image	Stored folder [Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data File Name image_admin_hyperv.rcxprop image_admin_hyperv.User_Group_Name.rcxprop	Refer to "8.3.9 [OS] Tab Configuration" in the "Setup Guide CE".
When creating virtual L-Servers using VMware ESXi on other companies' servers	Stored folder [Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data [Linux Manager] /etc/opt/FJSVrcvmr/customize_data File Name server_control.rcxprop	Refer to "8.1.5 Definition Files when Creating a Virtual L-Server Using VMware ESXi on Another Vendor's Servers or when Creating Virtual L-Servers without Using ServerView ESXi CIM Provider on VMware ESXi on Fujitsu Rack Mount Servers" in the "Setup Guide CE".
vm.rcxprop When modifying behaviors of server virtualization software vm_console.rcxprop When configuring using console connections from public LANs	Stored folder [Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data [Linux Manager] /etc/opt/FJSVrcvmr/customize_data File Name vm.rcxprop vm_console.rcxprop	Refer to "8.2.1 Creating Definition Files" in the "Setup Guide CE".
When creating L-Servers connected with NICs using System Center 2012 Virtual Machine Manager	Stored folder [Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data File Name scvmm_mac_pool.rcxprop scvmm_mac_pool_Tenant_Name.rxxprop	Refer to "8.3.5 Manual Network Configuration" in the "Setup Guide CE".
When using distributed virtual switches	Stored folder [Windows Manager] Installation_folder\SVROR\Manager\etc\vm [Linux Manager] /etc/opt/FJSVrcvmr/vm File Name vds_vc	Refer to "E.1.4 Network Preparations" in the "Design Guide CE".
iSCSI network definition file	Stored folder [Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data\ [Linux Manager] /etc/opt/FJSVrcvmr/customize_data/ File Name iscsi_User_Group_Name.rcxprop iscsi.rcxprop	Refer to "7.1.10 Definition File for iSCSI Network" in the "Setup Guide CE".
Configuration for ordering display of resources on trees	Stored folder [Windows Manager] Installation_folder\SVROR\Manager\etc\customize_data\ [Linux Manager] /etc/opt/FJSVrcvmr/customize_data/ File Name gui_config.rcxprop	Refer to "2.3.1.3 Sorting the Resource List in the Tree" in the "Release Notes".

If the following configuration files exist in the Active-Active operation, contact Fujitsu technical staff.

[Windows Manager]

• Installation_folder\SVROR\Manager\etc\customize_data\mwgui_config.rcxprop

• Installation_folder\SVROR\Manager\etc\vm\single_storage_vc

• Installation_folder\SVROR\Manager\etc\vm\delete_old_image

• Installation_folder\SVROR\Manager\etc\vm\online_cloning

• Installation_folder\SVROR\Manager\etc\customize_data\use_image_data_disk

• Installation_folder\SVROR\Manager\etc\l_server\disable_check_num_of_cpu

• Installation_folder\SVROR\Manager\etc\l_server\enable_cpu_per_socket

• Installation_folder\SVROR\Manager\etc\customize_data\gui_always_home.rcxprop

• Installation_folder\SVROR\Manager\etc\customize_data\gui_enable_reverse_proxy.rcxprop

• Installation_folder\SVROR\Manager\etc\customize_data\network_map.rcxprop

• Installation_folder\SVROR\Manager\etc\customize_data\network_viewer.rcxprop

• Installation_folder\SVROR\Manager\etc\customize_data\show_vds_vc.rcxprop

• Installation_folder\SVROR\Manager\etc\customize_data\setup_wizard\enable_advanced_mode.rcxprop

• Installation_folder\SVROR\Manager\etc\customize_data\setup_wizard\lplatform_console_setup_parameter_on

• Installation_folder\SVROR\Manager\etc\l_platform\enable_cloning

• Installation_folder\SVROR\Manager\etc\vm\require_image_location

• Installation_folder\SVROR\Manager\sys\irmctool\*

[Linux Manager]

• /etc/opt/FJSVrcvmr/customize_data/mwgui_config.rcxprop

• /etc/opt/FJSVrcvmr/vm/single_storage_vc

• /etc/opt/FJSVrcvmr/vm/delete_old_image

• /etc/opt/FJSVrcvmr/vm/online_cloning

• /etc/opt/FJSVrcvmr/l_server/enable_control

• /etc/opt/FJSVrcvmr/customize_data/use_image_data_disk

• /etc/opt/FJSVrcvmr/l_server/disable_check_num_of_cpu

• /etc/opt/FJSVrcvmr/l_server/enable_cpu_per_socket

• /etc/opt/FJSVrcvmr/customize_data/gui_always_home.rcxprop

• /etc/opt/FJSVrcvmr/customize_data/gui_enable_reverse_proxy.rcxprop

• /etc/opt/FJSVrcvmr/customize_data/network_map.rcxprop

• /etc/opt/FJSVrcvmr/customize_data/network_viewer.rcxprop

• /etc/opt/FJSVrcvmr/customize_data/show_vds_vc.rcxprop

• /etc/opt/FJSVrcvmr/customize_data/setup_wizard/enable_advanced_mode.rcxprop

• /etc/opt/FJSVrcvmr/customize_data/setup_wizard/lplatform_console_setup_parameter_on

• /etc/opt/FJSVrcvmr/l_platform/enable_cloning

• /etc/opt/FJSVrcvmr/vm/require_image_location

• /opt/FJSVrcvmr/sys/irmctool/*