The name of the resource is displayed.
The type of the resource is displayed.
The label set for the resource is displayed.
Comments set for the resource are displayed.
The name of the L-Server template used for the L-Server is displayed.
The CPU performance defined for the L-Server is displayed.
The CPU performance of the physical server actually allocated to the L-Server is displayed.
Note
When the CPU performance is "Unlimited" or not decided, a hyphen ("-") is displayed for CPU performance.
The CPU performance defined during L-Server creation is displayed.
Note
[Solaris Zones]
CPU performance is displayed based on a cap value when a resource pool for Solaris Zones used in a non-global zone is changed from unmanaged to managed.
When a cap value is set, the CPU performance is calculated using the following formulas:
Number of CPUs = cap values of CPUs / 100 (rounding up the number of decimal places)
CPU performance = (cap values of CPUs / (Number of CPUs * 100)) * physical CPU performance (GHz)
When the cap values calculated using the CPU performance and the number of CPUs for L-Servers are the same as those configured for the non-global zone, the CPU performance and the number of CPUs for L-Servers are not updated, and the values are not changed from the configured values.
When a cap value is not set, a hyphen ("-") is displayed.
A hyphen ("-") is displayed for the CPU performance when a resource pool used for Solaris Zones in the non-global zone is changed from managed to unmanaged.
The number of CPUs defined for the L-Server is displayed.
The CPU performance of the physical server actually allocated to the L-Server is displayed.
The number of CPUs defined during L-Server creation is displayed.
Note
[Solaris Zones]
The number of CPUs is displayed based on a cap value when a resource pool for Solaris Zones used in a non-global zone is changed from unmanaged to managed.
When a cap value is set, the CPU performance is calculated using the following formulas:
Number of CPUs = cap values of CPUs / 100 (rounding up the number of decimal places)
When the cap values calculated using the CPU performance and the number of CPUs for L-Servers are the same as those configured for the non-global zone, the CPU performance and the number of CPUs for L-Servers are not updated, and the values are not changed from the configured values.
When a cap value is not set, a hyphen ("-") is displayed.
A hyphen ("-") is displayed for the number of CPUs when a resource pool used for Solaris Zones in the non-global zone is changed from managed to unmanaged.
The memory capacity defined for the L-Server is displayed.
The memory capacity of the physical server actually allocated to the L-Server is displayed.
The memory capacity defined during L-Server creation is displayed.
Note
[Solaris Zones]
When the cap value of memory is set, that value is displayed.
When the cap value of memory is not set, a hyphen ("-") is displayed.
The model name defined for the L-Server is displayed.
The model name of the physical server actually allocated to the L-Server is displayed.
The model name defined during L-Server creation is displayed.
The server type of the L-Server is displayed.
The type of disks on the physical L-Server is displayed.
One of the following is displayed:
iSCSI
SAN (Storage Area Network)
Displayed when [Function number expansion (Onboard)] is set.
Displayed when [Function number expansion (Onboard)] is not set.
Displayed when using [Function number expansion (Onboard)].
Displayed when not using [Function number expansion (Onboard)].
One of the following is displayed:
When PXE boot is configured for the physical L-Sever
"Enable" is displayed.
When PXE boot is not configured
"Disable" is displayed.
The minimum size of CPU resources (minimum reserved value) to be allocated for the VM guest is displayed.
The relative proportion of CPU resources to be allocated when CPU resources run out is displayed.
The minimum size of memory resources (minimum reserved value) to be allocated for the VM guest is displayed.
The proportion of memory to be allocated to the VM guest as a buffer is displayed.
The relative proportion of memory resources to be allocated when memory resources run out is displayed.
One of the following is displayed: Only displayed for virtual L-Servers.
When Dynamic Memory is "true"
"on" is displayed.
When Dynamic Memory is "false"
"off" is displayed.
L-Server redundancy settings are displayed.
The method to select a spare server of the L-Server is displayed.
When the physical servers in a spare server pool are running out; the setting status for use of forced turning off of physical servers is displayed.
When configuring this parameter
"on" is displayed.
When not configuring this parameter
"off" is displayed.
The spare server pool for the L-Server is displayed.
The alive monitoring configuration status is displayed.
When Alive Monitoring is Configured
"on" is displayed.
When Alive Monitoring is not Configured
"off" is displayed.
Note
For virtual L-Servers upgraded from earlier versions, or virtual L-Servers linking with already configured virtual machines, a hyphen ("-") is displayed for the alive monitoring configuration status.
The L-Server's physical location change status is displayed.
Resource release settings are displayed.
When Repurpose is Configured
"on" is displayed.
When Repurpose is not Configured
"off" is displayed.
When the physical servers in a spare server pool are running out; the setting status for "Allow forced turning off" is displayed.
When allowing the forced turning off of the target physical server
"Allow" is displayed.
When not allowing the forced turning off of the target physical server.
"-" is displayed.
The information set for "Physical server" or "VM host" during L-Server creation is displayed.
When neither server nor host is specified (Automatic)
"Automatic" is displayed.
When a resource pool is specified
The server pool icon or VM pool icon and resource pool name are displayed.
For physical servers
The server pool icon and resource pool name are displayed.
For a VM host
The VM host icon and VM host name are displayed.
The name of the physical server or VM host that was started by the L-Server last time is displayed.
The exclusive operation settings of the L-Server are displayed.
The startup priority of the L-Server is displayed.
When the startup priority is "0", "Exclude from batch power operations" is displayed.
For physical L-Servers, whether only one path has been configured for VIOM or HBAar is displayed.
When single path mode is set
"on" is displayed.
When single path mode is not set
"off" is displayed.
When using virtual L-Servers with a Windows manager, "VDI management server" is displayed.
When the VDI option is not enabled, a hyphen ("-") is displayed.
When using virtual L-Servers with a Windows manager, "VDI pool" is displayed.
When the VDI option is not enabled, a hyphen ("-") is displayed.
When using virtual L-Servers with a Windows manager, "VDI user" is displayed.
When the VDI option is not enabled, a hyphen ("-") is displayed.
The OS type of the L-Server is displayed.
Information
The OS type of the L-Server displays information acquired from the server virtualization software.
For details on displayed information, refer to the manual of server virtualization software.
[KVM]
The OS type specified when the L-Server was created is displayed.
Note that it is not acquired from the server virtualization software.
[Solaris Zones]
Solaris is displayed.
Note that it is not acquired from the server virtualization software.
The resource status of the L-Server is displayed.
The resource allocation status of the L-Server is displayed.
The management status of the resources allocated to the L-Server is displayed.
Displays the resource types being managed. When there are multiple resource types being managed, they are displayed separated by commas (").
This item is displayed when using an L-Server associated with configured physical servers and configured virtual machines.
When server resources are being managed
"Server" is displayed.
When storage resources are being managed
"Storage" is displayed.
When IP addresses are being managed
"Network" is displayed.
When no resources are being managed
A hyphen ("-") is displayed.
For the L-Servers that were created in Resource Orchestrator, a hyphen ("-") is displayed.
A link to the resource details for the related physical server is displayed.
A link to the resource details for the related VM guest is displayed.
The VM type of the L-Server is displayed.
The management software for the L-Server is displayed.
The name of the cloning image specified during L-Server creation is displayed.
The version of the cloning image specified during L-Server creation is displayed.
The information of the WWNN allocated to the L-Server is displayed.
The information of the WWPN allocated to the L-Server is displayed.
When single path mode is set, one of the displayed addresses is set for the WWPN address.
The disk number set for the L-Server is displayed.
The disk size set for the L-Server is displayed.
The type or identifier information of the disk allocated to the L-Server is displayed.
When a device path cannot be obtained, a hyphen ("-") is displayed.
The usage of the disk set for the L-Server is displayed.
For virtual L-Servers linked with configured virtual machines and virtual L-Servers for which the usage of disks cannot be distinguished, a hyphen ("-") is displayed.
The disk name set for the L-Server is displayed.
When a Disk is Allocated
A link to the detailed information of the allocated disk is displayed.
When No Disk is Allocated
The name of the resource to be used is displayed.
The type of the disk allocated to the L-Server is displayed.
When type information cannot be obtained, a hyphen ("-") is displayed.
The shared disk status is displayed.
When the disk is allocated to multiple L-Servers
"yes" is displayed.
In other cases
"no" is displayed.
The network number configured for the L-Server is displayed.
The IP address of the network configured for the L-Server is displayed.
The MAC address of the NIC configured for the L-Server is displayed.
[Physical Servers] [KVM] [Citrix Xen] [Xen]
The MAC address allocated from the MAC address set resources is displayed.
[VMware] [Hyper-V]
The MAC address allocated by the VM management software during creation of the virtual NIC for the virtual machine is displayed.
However, when the status of an L-Server for which a configuration definition has already been created (defined), a hyphen ("-") is displayed.
[Solaris Zones] [OVM for SPARC] [OVM for x86 3.x] [OVM for x86 2.2]
The MAC address is not displayed because no MAC address is configured for the NICs of L-Servers. A hyphen ("-") is displayed.
Information
[Citrix Xen]
The MAC address is not displayed because MAC addresses are not configured for NICs that are added by adding the NIC definition. A hyphen ("-") is displayed.
The network name configured for the L-Server is displayed.
Displayed when using a physical L-Server. The NIC number of the physical server corresponding to the network No. of the physical L-Server is displayed. When [Function number expansion] is enabled, the NIC number of the physical server followed by "#" and the function number is displayed. When no physical servers are allocated, a hyphen ("-") is displayed.
The VLAN ID for the network resource is displayed.
When "Untagged VLAN" is configured for the physical L-Server, "-" is displayed.
When [Function number expansion] is set, the value of the VLAN ID (LPVID) is displayed.
The version of the snapshot image collected from the L-Server is displayed.
The date and time the snapshot image was collected from the L-Server is displayed.
Comments set for the snapshot image collected from the L-Server are displayed.
