6.2.2 Virtual Edition

The hardware conditions described in the table below must be met when using Resource Orchestrator.

Hardware Conditions When Using Monitoring Functions of Network Devices

Table 6.114 Supported Network Devices
Hardware		Version	Status Monitoring (*1)
L2 switches	Fujitsu SR-X 300 series Fujitsu SR-X 500 series	V01 or later	Yes
	Cisco Catalyst 2900 series Cisco Catalyst 2918 series Cisco Catalyst 2928 series Cisco Catalyst 2940 series Cisco Catalyst 2955 series Cisco Catalyst 2970 series Cisco Catalyst 2975 series Cisco Catalyst 3500 series Cisco Catalyst 3550 series	IOS 12.2 or later	Yes
	Cisco Catalyst 2950 series Cisco Catalyst 2960 series Cisco Catalyst 3560 series Cisco Catalyst 3750 series	IOS 12.2 or later	Yes
	Cisco Nexus 5000 series	NX-OS V5.2	Yes
	Brocade VDX 6710 series Brocade VDX 6720 series Brocade VDX 6730 series Brocade VDX 6740 Brocade VDX 6740T Brocade VDX 6940 series	NOS 2.0 or later	Yes
Ethernet Fabric	Fujitsu PRIMERGY Converged Fabric Switch Blade (10 Gbps 18/8+2)	V01.00 or later	Yes
	Fujitsu Converged Fabric Switch	V01.00 or later	Yes
	Brocade VDX 6710 series Brocade VDX 6720 series Brocade VDX 6730 series Brocade VDX 6740 Brocade VDX 6740T Brocade VDX 6940 series (*2)	NOS4.0 or later (*3)	Yes
Firewalls	Fujitsu IPCOM EX IN series Fujitsu IPCOM EX SC series	E20L10 or later	Yes
	Fujitsu IPCOM VA LS series Fujitsu IPCOM VA SC series	E20L21NF0301 or later	Yes
	Cisco ASA 5500 series	ASASoftware-8.3 or later	Yes
Server load balancers	Fujitsu IPCOM EX IN series Fujitsu IPCOM EX LB series	E20L10 or later	Yes
	Fujitsu IPCOM VA LS series Fujitsu IPCOM VA LB series	E20L21NF0301 or later	Yes
	F5 Networks BIG-IP Local Traffic Manager series	BIG-IP V11.2	Yes
Management host	Fujitsu IPCOM VX series	E10L11 or later	Yes

Yes: Use possible.
No: Use not possible.

*1: Status monitoring is enabled when the support range of network devices is expanded.
For details on the procedure to expand the support range of network devices, refer to "7.5.1 Enabling the Network Device Management Function" in the "User's Guide VE".
*2: 100 GbE ports cannot be displayed.
*3: NOS4.1.2ac is not supported.