This section explains the initial setup using the Setup Wizard.
Use the following procedure:
Select the [Home] tab from the ROR Console, and then click [Setup Wizard] displayed on the Tools of the Functions list.
Start the initial setup from the displayed window.
The following eight steps are required.
In each step, click <Next> to move to the next step, and click <Back> to return to the previous step. In the last step, click <Finish> to complete the initial setup. To move to the next step without changing the current settings in each step, simply click <Next>.
Perform the following settings in each step. For details of the setting items for each step, refer to the table below.
Select whether approval and assessment (application process) should be performed for L-Platform usage application, configuration modification, and cancellation.
Enter the SMTP server name, port number, and sender's email address.
Enter the parameters for tenant management settings.
Enter the parameters for L-Platform settings.
Enter the parameters for L-Platform settings.
Enter the parameters for usage fees for the L-Platform and Accounting Tabs.
Enter the parameters to set for the OS when creating the virtual L-Server.
The content of the settings can be checked.
Note
If the application process checkbox is being changed from on to off after the manager starts its operation, make sure that there are no pending processes before changing it. If there are pending processes, Perform the tasks below to end all processes:
Cancel
Approve or reject
Accept or dismiss
Set the following settings on "L-Platform 1/2" and "L-Platform 2/2" before operations commence. This attribute cannot be switched once operations have commenced.
Overcommit function
System disk for physical L-Servers
Setting method for host name
Setting method for L-Server's resource name
Setting method for folder's resource name
Restart the manager for the settings (except OS Property) to take effect.
This table contains the settings involved for each step.
Step | Setting Items | Description | Definition file reference | ||
|---|---|---|---|---|---|
Step 1 Application Process | Application process function (*3) | Select whether to use the application process. (*1) | - | ||
L-Platform subscription | The Application Process regarding L-Platforms can be set. (*1) If "Enable" is selected in Application process and all these settings are cleared, the Request tab will be displayed on the ROR Console, but it will not be possible to use the application process. However, if "Enable" is selected in the Application process, these settings can be modified for each tenant using the [Tenants] tab of the ROR Console. | Refer to "9.2.2 Setting Application process settings" and "9.2.3 Setting Application process to be used" in the "Setup Guide CE". (*2) | |||
L-Platform reconfiguration | |||||
L-Platform cancellation | |||||
Step 2 Email | SMTP server name | The host name and port number of the SMTP server, and the sender's mail address can be set. Also, when all parameters are defined, the Mail Sending function is enabled, and SMTP server authentication is defined as none. | Refer to each setting of "9.1 Settings for Sending Email" in the "Setup Guide CE". | ||
Port number | |||||
Sender's email address | |||||
Step 3 Tenant | Perform user management by tenant administrator (*3) | User management performed by the tenant administrator and the reflection of information on the directory service during user registration using single sign-on authentication can be configured. | Refer to each setting of "8.6.1 Settings for Tenant Management and Account Management" in the "Operation Guide CE". | ||
Setting method for registering a tenant user by tenant administrator | |||||
Update user information to the directory service | |||||
Step 4 L-Platform1/2 | Overcommit function | The L-Platform management overcommit function can be set. When "Enable" is selected, the definition for displaying the reserved CPU frequency and memory in the System Condition Server List is also made. | Refer to "9.6 Settings for the Overcommit Function" in the "Setup Guide CE" and "8.8 System Condition Server List Setting" in the "Operation Guide CE". | ||
Distribution ratio setting method | The simple selection method for the distribution ratios of CPUs and memory that corresponds to the distribution ratio settings of VMware can be set. | Refer to "8.5.4 Distribution Ratio Setting" in the "Operation Guide CE". | |||
Reconfigure an L-Platform from the template | When making an L-Platform usage application, the value specified in the L-Platform template can be modified. | Refer to "8.5.1 Settings for Permissions to Change L-Platform Templates" in the "Operation Guide CE". | |||
Server specification setting method | When making an L-Platform usage application, or when changing the configuration of an L-Platform, the server specification setting method can be set. | Refer to "8.5.3 Settings for the Simplified Reconfiguration Function" in the "Operation Guide CE". | |||
Segment display method | When performing an application to use an L-Platform, the method for setting up the subnets that are allocated to segments be can set. | Refer to "8.5.2 Subnet Settings at Segment Editing" in the "Operation Guide CE". | |||
System disk for physical L-Servers | When a physical L-Server is deployed from the L-Platform window, the disk to use as the system disk for the physical L-Server can be set. | Refer to "9.9 System Disk Settings for Physical L-Servers" in the "Setup Guide CE". | |||
Step 5 L-Platform2/2 | Setting method for host names | The Host Name of the virtual server can be set. | Refer to "9.4 Setting the Host Names for Virtual Servers" in the "Setup Guide CE". | ||
Setting method for the L-Server's resource name | The setting method for the resource names of the folders and the L-Server of the L-Platform created when applying to use an L-Platform can be set. | Refer to "9.5 Setting the Method for Setting Resource Names" in the "Setup Guide CE". | |||
Setting method for the folder's resource name | |||||
Step 6 Accounting | Usage fee (estimated price) for L-Platform Tab | It is possible to set whether to display the Usage fee (the estimated price) on the L-Platform Tab in the [L-Platforms] tab based on L-Platform template accounting information. | Refer to "8.7.1 Display Function Settings for Estimated Price" in the "Operation Guide CE". | ||
Perform usage charge calculation (*3) | The usage charge calculator function can be set. | Refer to "8.7.4 Usage Charge Calculator Settings" in the "Operation Guide CE". | |||
Default cut-off date | |||||
Default receiver's email address for usage fee information | |||||
Step 7 OS Properties | Windows | Domain name | The default values of the information on the [OS] tab, etc. can be set when creating a virtual L-Server. | Refer to "8.1.8 OS Property Definition File" in the "Setup Guide CE". | |
Full name | |||||
Organization name | |||||
Product key | |||||
License mode | |||||
Configuration required for participation in the Active Directory domain | Domain name | ||||
Domain user ID | |||||
Domain user password | |||||
Confirm password | |||||
Linux | Domain name | ||||
DNS search path | |||||
Hardware clock setting | |||||
Solaris | Administrator user | ||||
Root role password | |||||
Confirm password | |||||
Common | Administrator password | ||||
Confirm password | |||||
Primary DNS server | |||||
Secondary DNS server | |||||
*1: "Global settings" common across systems are used for the application process instead of "Unique settings" for each tenant. Refer to "11.3 Creating a Tenant" for information on "Unique settings".
*2: Regarding the use of the setup wizard and definition file:
In the setup wizard, the six items explained in "9.2.2 Setting Application Process Settings" and "9.2.3 Setting Application Process to be Used" in the "Setup Guide CE" are displayed grouped into three items.
When the items in the setup wizard are not checked, "false" is set for the corresponding item described in "9.2.2 Setting Application Process Settings" in the "Setup Guide CE". When the items are checked, "true" is set.
For the items described in "9.2.3 Setting Application Process to be Used", the definitions corresponding to the items checked in the setup wizard are configured.
*3: When these setting items have been changed, the tab display permissions for the basic roles corresponding to these features are changed. The tab display permissions for each role can be changed by customizing the roles. Refer to "Chapter 3 Configuring Users and Customizing Roles" in the "User's Guide for Infrastructure Administrators (Resource Management) CE" for information on customizing roles.
Point
In the setup wizard, the items explained in the sections indicated below are configured.
"Chapter 8 Changing Settings" in the "Operation Guide CE"
"Chapter 9 Post-Installation Procedures" in the "Setup Guide CE"
"8.1.8 OS Property Definition File" in the "Setup Guide CE"
Start the setup wizard, and configure any items that need to be changed but are not configured in the setup wizard.
G.1 Definition Files (For Both Physical L-Servers and Virtual L-Servers)
G.2 Definition Files (For Physical L-Servers)
G.3 Definition Files (For Virtual L-Servers)
G.4 Definition Files (Network)
9.3 Customizing the Dashboard
9.10 Settings for Restarting Managers
9.11 Changing Multiple Operations of Managers
9.12 Edit the License Agreement
9.13 Editing the User Agreement when Registering a User
8.5.6 Editing the Environment Setup File for the L-Platform API
8.5.7 Edit the License Agreement
8.5.8 Settings when RHEL5-Xen is used
8.5.9 Default Password Setting for Sent Emails
8.5.10 Settings for the Maximum Number of Connections for the L-Platform Template
8.5.11 Customizing the User Rights for L-Platform Operations
8.6 Settings for Tenant Management and Account Management
8.7 Accounting Settings
8.8 System Condition Server List Settings
8.9 Settings for Event Log Output for CMDB Agent