Hardware environment required to apply Systemwalker Desktop Patrol is described according to different components.
CS
Required CPU specifications
Intel(R) Xeon(R) E5503 2GHz or higher
Required memory capacity
Note
To import the data registered in the SAMAC Software Dictionary to the CS, at least 384 MB of memory is required.
Required disk capacity (Note 1) (Note 4)
720 MB (installation destination) + 90 MB (required by the system drive to store the runtime library) + the size of registered software or more+ the size of registered patches (Note 2) + the size of CT operation status log (Note 3) + 100MB (Note 4)
Note 1: The required disk capacity shall meet the requirements shown below according to the above mentioned disk capacity and the size of database to be structured.
Number of PC(s) | EXE Information Collection | Software Operation Status Collection | Database Capacity |
|---|---|---|---|
500 | None | None | About 4.0GB |
None | Exist | About 4.8GB | |
Exist | None | About 5.6GB | |
Exist | Exist | About 6.4GB | |
1000 | None | None | About 6.1GB |
None | Exist | About 7.7GB | |
Exist | None | About 9.3GB | |
Exist | Exist | About 10.8GB | |
3000 | None | None | About 13.1GB |
None | Exist | About 17.2GB | |
Exist | None | About 21.4GB | |
Exist | Exist | About 25.5GB | |
10000 | None | None | About 38.7GB |
None | Exist | About 52.3GB | |
Exist | None | About 66.2GB | |
Exist | Exist | About 79.8GB | |
20000 | None | None | About 75.3GB |
None | Exist | About 102.5GB | |
Exist | None | About 130.2GB | |
Exist | Exist | About 157.5GB |
Note 2: The size of registered patch is important when an automatic patch installation function is used. The disk capacity shall reach 7 GB or higher.
Note 3: The disk capacity must meet the following requirement for saving CT operation status log
In addition, the information of the log file will be used in the partial (operation status) information which is displayed via the CT operating status inspection command. If no CT operation status log is saved in CS, "Operation Status" will not be displayed.
Size of CT operation status log = 30 KB x User quantity x Save days
Note 4: The disk capacity required for installing and managing the software.
This space is secured under <system drive>\FujitsuF4CR.
Registration or distribution of software or automatic application security patches shall be executed after confirming that there is enough usable disk capacity for processing object software. In addition, the software save directory shall be defined as other spaces except the installation disk of OS in order to prevent insufficient disk capacity due to registration or distribution of software or automatic application security patches. Further, properly set the maximum size of software save directory.
For database storage, approximately 1.2 times the required disk capacity estimated above is required.
The space allocated for database before extension is displayed for Giving amount in the This is the current database usage page of the Operation Environment Maintenance Guide wizard during the database extension. Check as required.
This disk available capacity must include the space required for backup data plus the space required for the database.
For backup data storage drive, at least the same amount of space as the space allocated for database before extension is required.
To change the database storage to a different drive, at least the same amount of space as the required disk capacity estimated above is required.
If you are not changing the database storage drive, the difference between the required disk capacity estimated above and the space allocated for database before extension is required as space.
To collect smart device information, the database space shown below is additionally required.
Number of smart devices x 4.5 MB |
To manage the devices (fixtures), the following additional database capacities will be required depending on the number of devices (fixtures), except PCs, that are to be managed.
Number of managed devices (fixtures) except PCs | Database capacity |
|---|---|
100 - 2,999 | Number of managed devices (fixtures) except PCs x 0.19 MB |
3,000 or more | Number of managed devices (fixtures) except PCs x 0.16 MB |
DS
Required CPU specifications
Intel(R) Xeon(R) E5503 (2 GHz) or higher
Required memory capacity
Over 720 MB (excluding usage amount of OS)
Required disk capacity
115 MB (installation destination) + 12 MB (required by the system drive to store the runtime library) + the size of downloaded software + the size of downloaded patches or higher (Note)
Note: The size of downloaded patch is important when an automatic patch application function is used. The disk capacity shall reach 7 GB or higher.
AC
Required CPU specifications
Pentium IV or Xeon(R) 2GHz or higher
Required memory capacity (Note)
Over 256MB (excluding usage amount of OS)
Required disk capacity (Note)
Over 100MB
Note: The file system shall be "NTFS (NT File System)".
CT
Required CPU specifications
1 GHz or higher
Required memory capacity
Over 32MB (excluding usage amount of OS)
Minimum resident memory
At normal time: 6MB
When collecting software operation status: 9MB
Non-resident memory for command mode CT.
Required disk capacity
42MB or more (regular version: installation destination) + 12 MB (required by the system drive to store the runtime library) + size of operating disk during patch installation (Note)
Note: The size for the work disk used in patch application will be required during the use of the automatic patch installation function.
If applying a security patch (Hotfix): 20 MB or more
If applying a service pack: Approx. 9 GB
Required CPU spec
1 GHz or more
Required memory capacity
32 MB or greater (not including the operating system usage)
Minimum resident memory used
Under normal use: 6 MB
During the software operation status collection: 9 MB
Command mode CT is non-resident
Required disk space
17 MB or more (normal version: installation destination) + 12 MB (required by the system drive to store the runtime library) + disk size for tasks when applying patches (Note)
8 MB or more (command mode CT)
Note: Capacity of operating disk during installation of a patch will be required when an auto patch installation function is used an installation function.
When a security patch (Hotfix) is used.
Installed: 20 MB or more.
When a service pack is installed: approximately 9 GB.
ADT
Required CPU specifications
Pentium IV 1GHz or higher
Required memory capacity
Over 512MB or higher (excluding usage amount of OS)
Required disk capacity (Note)
Over 5MB
Note: The file system shall be "NTFS (NT File System)".
Management target PC of PC operation management function
When the PC operation management function is being used, as a PC of operation management target, it shall support Intel(R) vPro or Intel(R) Centrino(R) Pro. PCs with AMT 2.0 - AMT 9.x are supported.
Printer (used for inventory verification/asset information conformation/report output)
The printer can be used when setting via AC and printing the asset information report.
The used printer shall have the following performances:
Capable of printing A4 paper
Capable of printing A4 paper in black and white
Resolution exceeds 600 dpi
A color printer is recommended to print the asset information report.
SS
Required CPU spec
Intel(R) Xeon(R) E5503(2 GHz) or higher
Required memory capacity
2 GB or greater (not including the operating system usage)
Required disk space
2 GB or more
Smart device CT
Required internal storage capacity
30 MB or more
Required external storage capacity
At least the total size of distributed applications is required if the application distribution function (to smart devices) is used.
