PRIMECLUSTER Installation and Administration Guide 4.3

J.2 Changes in PRIMECLUSTER 4.3A30 from 4.1A20

Incompatible commands

The following commands of PRIMECLUSTER 4.3A30 are incompatible with PRIMECLUSTER 4.1A20.

• J.2.1 clgettree(1) command

• J.2.2 hvdisp command

• J.2.3 ciptool command

• J.2.4 sdtool command

• J.2.5 hvshut command

• J.2.6 hvswitch command

Incompatible functions

The following functions of PRIMECLUSTER 4.3A30 are incompatible with PRIMECLUSTER 4.1A20.

• J.2.7 Operator Intervention Request

• J.2.8 Node state

• J.2.9 Operation Procedures and Displayed Items for Cluster Application Setup and Modification

• J.2.10 Setting Up Fsystem Resources

• J.2.11 Client Environment for Web-Based Admin View

• J.2.12 Changes of the Behavior of CF Startup

• J.2.13 HV_CONNECT_TIMEOUT

• J.2.14 Changes of the ports used by RMS

• J.2.15 Changes of the port number used by the shutdown facility

• J.2.16 Changes of the target node to forcibly shut down when a heartbeat failure occurs

Incompatible messages

The following messages of PRIMECLUSTER 4.3A30 are incompatible with PRIMECLUSTER 4.1A20.

• J.2.17 Changes of the RMS message

• J.2.18 Changes of the importance of the message in the RMS wizard

• J.2.19 Changes of RMS console message

• J.2.20 Changes of the response message for the operator intervention request