Linkage with Systemwalker Service Quality Coordinator, Systemwalker Service Quality Coordinator can make use of performance information of storage devices and Fibre Channel switches.
Refer to the Systemwalker Service Quality Coordinator User's Guide or the Systemwalker Service Quality Coordinator User's Guide for the procedure for linkage.
Items That Can Be Linked to Systemwalker Service Quality Coordinator
Performance Information (Unit) | |
|---|---|
Port | Transfer rates of send/receive data (MB/S) |
Number of CRC errors |
Performance Information (Unit) | |
|---|---|
LUN | Read/Write count (IOPS) |
Read/Write data transfer rate (MB/S) | |
Read/Write response time (msec) | |
Read/Pre-fetch/Write cache hit rate (%) | |
Disk drive | Disk busy rate (%) |
CM | Load (CPU usage) rate (%) |
Note
The performance information that can be managed depends on the version of Systemwalker Service Quality Coordinator.
The CM load (CPU usage) rate for ETERNUS DX400/DX400 S2 series and DX8000/DX8000 S2 series includes the ROE load (CPU usage) rate.
Method to Identify CM or CM CPU of ETERNUS Disk Storage System from Performance Information Collected by Systemwalker Service Quality Coordinator
Based on the string "0x300nn" included in the resource ID of the performance information collected by Systemwalker Service Quality Coordinator, identify the CM or CM CPU of the target ETERNUS Disk storage system from the following correspondence table.
Storage Device Name | String Indicating CM or CM CPU Included in Resource ID | CM or CM CPU |
|---|---|---|
ETERNUS DX60/DX60 S2 | 0x30010 | CM#0 |
0x30011 | CM#1 | |
0x30012 | CM#2 | |
0x30013 | CM#3 | |
0x30014 | CM#4 | |
0x30015 | CM#5 | |
0x30016 | CM#6 | |
0x30017 | CM#7 | |
ETERNUS DX400 series | 0x30010 | CM#0 CPU#0 |
0x30011 | CM#1 CPU#0 | |
0x30012 | CM#2 CPU#0 | |
0x30013 | CM#3 CPU#0 | |
0x30014 | CM#4 CPU#0 | |
0x30015 | CM#5 CPU#0 | |
0x30016 | CM#6 CPU#0 | |
0x30017 | CM#7 CPU#0 | |
0x30018 | CM#0 CPU#1 | |
0x30019 | CM#1 CPU#1 | |
0x3001a | CM#2 CPU#1 | |
0x3001b | CM#3 CPU#1 | |
0x3001c | CM#4 CPU#1 | |
0x3001d | CM#5 CPU#1 | |
0x3001e | CM#6 CPU#1 | |
0x3001f | CM#7 CPU#1 | |
ETERNUS DX8000 S3 series | 0x30010 | CE#0 CM#0 |
0x30011 | CE#1 CM#0 | |
0x30012 | CE#2 CM#0 | |
0x30013 | CE#3 CM#0 | |
0x30020 | CE#0 CM#1 | |
0x30021 | CE#1 CM#1 | |
0x30022 | CE#2 CM#1 | |
0x30023 | CE#3 CM#1 |
