D.1.4 Actions after performing Disaster Recovery

After performing Disaster Recovery, check vsys_dr_log to see if the logs shown in "D.1.1 Logs of L-Platforms being Processed during Disaster Recovery Switchover Information Collection" and "D.1.2 Logs that Reflect the Resource Status due to Automatic Processing of L-Platform" are output.

This section explains the log output according to the processes described for the "Processing" item in "D.1.1 Logs of L-Platforms being Processed during Disaster Recovery Switchover Information Collection".

SUBSCRIBING

The L-Platform was being deployed by subscription or by importing L-Servers when it was exported.

Pattern 1

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	INFO
	Action item	SET NETWORK DEVICE RESOURCE-ID SET DISK RESOURCE-ID SET IP ADDRESS SET SCOPE OF L-PLATFORM
Condition	The L-Platform has been deployed successfully after being exported, and the resources exist. The resource status has been reflected in the L-Platform configuration information.
Action	The L-Platform can be operated as is. No action required.

Pattern 2

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	INFO
	Action item	DELETED L-PLATFORM
Condition	The L-Platform was exported when its subscription was being processed, but the deployment failed, or it was exported when an L-Server was being imported as an L-Platform, but the processing was not completed. The L-Platform configuration information was deleted because the resources do not exist.
Action	If the subscription was not successfully processed, process it again. If the import of an L-Server as a new L-Platform has not been completed, check the status of the orchestration tree on the [Resource] tab and take the following actions. Check if the tenant contains the L-Platform ID name folder (1). Perform step 3 if it does not contain folders. If it contains a folder, check if the folder also contains an L-Server to be imported. Perform steps 2 and 3 if the folder does not contain any L-Server. If the folder contains an L-Server, perform steps 2 and 3 after moving the target L-Server to a location where they can be imported, such as immediately below the tenant or root. Delete the L-Platform ID name folder () in the tenant. Import the L-Server again.

*1: The folder name can be specified according to "18.5 Setting the Method for Setting Resource Names" in the "Setup Guide CE". The default is L-Platform ID.

RECONFIGURING

The L-Platform was during a reconfiguration such as adding or deleting servers, disks or NICs, or changing server details when it was exported.

Pattern 1

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	INFO
	Action item	SET DISK RESOURCE-ID SET IP ADDRESS
Condition	After the L-Platform has been exported while a server was being added by reconfiguration, the server was successfully added. The resource status has been reflected in the L-Platform configuration information.
Action	The L-Platform can be operated as is. No action required.

Pattern2

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	INFO
	Action item	DELETED SERVER
Condition	After the L-Platform has been exported while a server was being removed by reconfiguration, the server has been successfully removed, or after the L-Platform has been exported while a server was being added by reconfiguration, the server was not successfully added. The server was removed from the L-Platform configuration information because the resources do not exist.
Action	If the L-Platform does not contain the required server, reconfigure it to add the server. If it contains segments to which no server or NIC is connected, reconfigure it to delete the segments.

Pattern3

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	INFO
	Action item	SET DISK RESOURCE-ID
Condition	After the L-Platform has been exported while adding an extended disk by reconfiguration, the disk has been successfully added. The resource status has been reflected in the L-Platform configuration information.
Action	The L-Platform can be operated as is. No action required.

Pattern4

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	INFO
	Action item	DELETED DISK
Condition	After the L-Platform has been exported while removing an extended disk by reconfiguration, the disk has been successfully removed, or after the L-Platform has been exported while adding an extended disk by reconfiguration, the disk was not successfully added. The extended disk was removed from the L-Platform configuration information because the resource does not exist.
Action	If the L-Platform does not contain required disks, reconfigure it to add an extension disk.

Pattern5

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	INFO
	Action item	ADDED NIC
Condition	After the L-Platform has been exported while adding an NIC by reconfiguration, the NIC has been successfully added and the resource exists. An NIC has been added to the L-Platform configuration information based on the resource status.
Action	The L-Platform can be operated as is. No action required.

Pattern6

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	INFO
	Action item	DELETED NIC
Condition	After the L-Platform has been exported while removing an NIC by reconfiguration, the NIC has been successfully removed. The NIC was removed from the L-Platform configuration information because the resource does not exist.
Action	If it contains segments to which no server or NIC is connected, reconfigure it to remove the segments.

Pattern7

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	INFO
	Action item	SET SERVER SPEC
Condition	After the L-Platform has been exported while the server specification was being changed by reconfiguration, the specification change has been successfully processed. The resource status has been reflected in the L-Platform configuration information.
Action	The L-Platform can be operated as is. No action required.

Pattern8

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	WARN
	Action item	LIST NETWORK DEVICE PARAMS
Condition	L-Platform was exported while the firewall setting was being changed during a reconfiguration.
Action	Reflect the setting in the firewall device as required.

Pattern9

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	None.
	Action item	None.
Condition	The L-Platform has been exported while reconfiguring, but the automatic processing was not performed because no difference has been identified between the L-Platform configuration information and the resource status at switchover. The possible scenarios are as follows: The L-Platform has been exported while the server was being removed, but the server was not successfully removed. The L-Platform has been exported while the disk was being removed, but the disk was not successfully removed. The L-Platform has been exported while the NIC was being removed, but the NIC was not successfully removed. The L-Platform has been exported while the server specification was being changed, but the specification was not successfully changed. The L-Platform has been exported while importing an L-Server to an existing L-Platform, and it was successfully imported. The L-Platform has been exported while releasing an L-Server from an L-Platform, and the L-Sever was not successfully released.
Action	Reconfigure, if required.

UNSUBSCRIBING

The L-Platform was being unsubscribed when it was exported.

Pattern1

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	INFO
	Action item	DELETED L-PLATFORM
Condition	After the L-Platform has been exported while it was being unsubscribed, it was successfully unsubscribed. The L-Platform configuration information was deleted because the resources do not exist.
Action	No action required.

Pattern2

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	None.
	Action item	None.
Condition	After the L-Platform has been exported while it was being unsubscribed, it was not successfully unsubscribed.
Action	Unsubscribe it again.

TAKING SNAPSHOT

The L-Platform that contains the virtual L-Server that the user was taking a snapshot of, or the physical L-Server that was being backed up, when it was exported.

Pattern1

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	INFO
	Action item	ADDED SNAPSHOT INFORMATION
Condition	After the virtual L-Server has been exported while taking a snapshot, it successfully took a snapshot, or after the physical L-Server has been exported while it was performing a backup, backup completed successfully. The snapshot/backup information was added in accordance with the status of resources.
Action	No action required.

Pattern2

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	INFO
	Action item	DELETED SNAPSHOT INFORMATION
Condition	After the virtual L-Server has been exported while taking a snapshot, it successfully took a snapshot, or after the physical L-Server has been exported while it was performing a backup, backup completed successfully. At this time, any old snapshots/backup data exceeding the maximum number of snapshot image versions were automatically deleted. The snapshot/backup information was deleted in accordance with the status of resources.
Action	No action required.

Pattern3

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	None.
	Action item	None.
Condition	After the virtual L-Server has been exported while taking a snapshot, it failed to take a snapshot, or after the physical L-Server has been exported while it was performing a backup, backup failed. Note that the end date in the snapshot/backup history will be blank and the status will display as an error.
Action	Take another snapshot or perform another backup as required.

RESTORING
The L-Platform contains servers that were being restored when it was exported.
Redo the operation as needed.
In the history of snapshots or backups, the ending date is displayed as a blank and the status as an error.

CLONING

The L-Platform contains servers that were being collected images of when it was exported.

Pattern1

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	None.
	Action item	None.
Condition	The L-Platform has been exported while collecting an image. If it is successfully collected, the orchestration tree on the [Resource] tab contains a cloning image that matches.
Action	If it contains a cloning image, you can create the corresponding image information and use it for operation. If it does not, collect it again.

APPLYING UNSUBSCRIPTION

The L-Platform was in an application process of an unsubscription when it was exported.

Pattern1

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	INFO
	Action item	DELETED L-PLATFORM
Condition	After the L-Platform has been exported while it was being unsubscribed, the unsubscription has been accepted and it was successfully unsubscribed. The L-Platform configuration information was deleted because the resources do not exist.
Action	No action required.

Pattern2

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	INFO
	Action item	CLEAR FLOW STATUS
Condition	After the L-Platform has been exported while it was being unsubscribed, the unsubscription has not been processed because it has not been accepted, it was rejected, or the unsubscription was unsuccessful. The application status has been initialized because the resources exist.
Action	If there is any unnecessary L-Platform, unsubscribe it again.

APPLYING SUBSCRIPTION

The L-Platform was in an application process of a subscription when it was exported.

Pattern1

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	None.
	Action item	None.
Condition	The L-Platform has been exported while subscribing to it.
Action	Subscribe to it again, if required. If the orchestration tree on the [Resource] tab contains any L-Platform that matches, the L-Platform cannot be appropriately managed by this product. After saving necessary job data, migrate the data to the newly subscribed and deployed L-Platform. Use the cfmg_deletelplatform command to remove unnecessary L-Platforms only found on the [Resource] tab. Refer to "10.1 cfmg_deletelplatform (Delete L-Platform)" in the "Reference Guide (Command/XML) CE".

SAVING NEW CONFIGURATION

The configuration of the L-Platform was saved when it was exported.

Pattern1

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	None.
	Action item	None.
Condition	The L-Platform has been exported while its configuration was being saved.
Action	Subscribe to it again, if required. If the orchestration tree on the [Resource] tab contains any L-Platform that matches, the L-Platform cannot be appropriately managed by this product. After saving necessary job data, migrate the data to the newly subscribed and deployed L-Platform. Use the cfmg_deletelplatform command to remove unnecessary L-Platforms only found on the [Resource] tab. Refer to "10.1 cfmg_deletelplatform (Delete L-Platform)" in the "Reference Guide (Command/XML) CE".

APPLYING RECONFIGURE

The L-Platform was in an application process of a reconfiguration when it was exported.

Pattern1

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	None.
	Action item	None.
Condition	The L-Platform has been exported while its reconfiguration was being applied.
Action	Check the status of the L-Platform and its resources. Reconfigure, if required.

SAVING RECONFIGURATION

The configuration of a reconfiguration of the L-Platform was saved when it was exported.

Pattern1

Logs that Reflect the Resource Status due to Automatic Processing of L-Platform	Error level	None.
	Action item	None.
Condition	The L-Platform has been exported while its configuration was saved.
Action	Check the status of the L-Platform and its resources. Reconfigure, if required.