This section explains messages starting from PAPI00000.
Processing was completed.
Description
Processing has completed successfully.
Corrective Action
No action is required.
The locale[{0}] doesn't exist.
Description
The specified locale is invalid.
Parameter
{0}: Specified locale
Corrective Action
Specify "en" for the locale.
The vsysId is not specified.
Description
The L-Platform ID has not been specified.
Corrective Action
Check whether the L-Platform ID has been specified.
The vserverId is not specified.
Description
The server ID has not been specified.
Corrective Action
Check whether the server ID has been specified.
The vserverType[{0}] doesn't exist.
Description
The specified machine type does not exist.
Parameter
{0}: Specified machine type
Corrective Action
Check whether the specified machine type has been registered on Resource Management.
The vserverType is not specified.
Description
The machine type has not been specified.
Corrective Action
Check whether the machine type has been specified.
System Error Occurred.id=[{0}]
Description
Invoking the L-Platform management function API has failed.
Parameter
{0}: Name of the L-Platform management function API
Corrective Action
Collect this message and the investigation data, and then contact Fujitsu technical staff.
A required parameter is not set.:{0}
Description
A required parameter has not been specified.
Parameter
{0}: Parameter name
Corrective Action
Refer to "Chapter 2 L-Platform API Reference" in the "Reference Guide (API) CE" and specify a suitable value.
The version[{0}] is invalid.
Description
The specified version is illegal.
Parameter
{0}: Specified version
Corrective Action
Refer to "Chapter 2 L-Platform API Reference" in the "Reference Guide (API) CE" and specify a suitable value.
Authorization failed for the user[{0}].
Description
It failed in the user's attestation.
Parameter
{0}: Specified user ID
Corrective Action
Ensure that user ID and password is correct.
The tenant[{0}] not found.
Description
The specified tenant does not exist or there is no right of access.
Parameter
{0}: Specified tenant name
Corrective Action
Ensure that the specified tenant name is correct.
System Error Occurred.[{0}]
Description
An unexpected error has occurred.
Parameter
{0}: Detailed error information
Corrective Action
Collect this message and the investigation data, and then contact Fujitsu technical staff.
The vserverId[{0}] doesn't exist.
Description
There are no servers with the specified vserverId.
Parameter
{0}: Specified vserverId
Corrective Action
Check the target server ID, specify the correct value, and try again.
SYSVOL[{0}] cannot used.
Description
The specified disk is a system disk, which cannot be changed or deleted.
Parameter
{0}: Specified vdiskId
Corrective Action
No operation can be performed on a system disk. Check whether the specified disk ID is the disk ID of a system disk.
The vdiskId[{0}] doesn't exist.
Description
There are no extension disks with the specified vdiskId.
Parameter
{0}: Specified vdiskId
Corrective Action
Check the target disk ID, specify the correct value, and try again.
Only the lserverType[{0}] can be used.
Description
Only the L-Server type [{0}] can be used.
Parameter
{0}: Server Type (Physics or virtual)
Corrective Action
Check the specified server Type.
The imagePool[{0}] not found.
Description
Either the specified image pool does not exist, or there are no access permissions.
Parameter
{0}: Specified imagePool name
Corrective Action
Ensure that the specified imagePool name is correct.
The storagePool[{0}] not found.
Description
Either the specified storage pool does not exist, or there are no access permissions.
Parameter
{0}: Specified storagePool name
Corrective Action
Ensure that the specified storagePool name is correct.
At least one needs to be specified out of these parameters[{0}].
Description
At least one needs to be specified out of displayed parameters.
Parameter
{0}: Parameter list
Corrective Action
Refer to "Chapter 2 L-Platform API Reference" in the "Reference Guide (API) CE" and specify a suitable value.
The VmType[{0}] is invalid.
Description
The specified L-Platform management function API is unavailable with the displayed VM type server.
Parameter
{0}: VM Type
Corrective Action
Refer to "Appendix C Configuration when Creating Virtual L-Servers" in the "Setup Guide CE" and check whether the VM type for the server is supported by the specified API.
The server of Solaris Container is included in this L-Platform[{0}].
Description
The Solaris Zones server is included in the L-Platform.
Parameter
{0}: L-Platform ID
Corrective Action
Confirm that the Solaris Zones server is included in the L-Platform.
This parameter[{0}] can be specified only for this VmType[{1}].
Description
Parameter[{0}] can be specified only for VmType[{1}].
Parameter
{0}: Parameter name
{1}: VM Type
Corrective Action
Confirm that the target server is the displayed VM type.
The Parameter[{0}] doesn't exist.
Description
The specified parameter does not exist.
Parameter
{0}: Parameter name of the ruleset
Corrective Action
Ensure that the specified parameter name exists in the parameters of the ruleset.
The SLB[{0}] doesn't exist.
Description
The specified server load balancer does not exist.
Parameter
{0}: Server load balancer name
Corrective Action
Check whether the specified server load balancer exists.
The Ruleset[{0}] doesn't exist.
Description
The specified ruleset does not exist or it is not a ruleset for operations.
Parameter
{0}: Ruleset name
Corrective Action
Check whether the specified ruleset exists and if it is a ruleset for operations.
The Parameter[{0}] is not specified.
Description
A parameter has not been specified.
Parameter
{0}: Parameter name
Corrective Action
Check whether the parameter has been specified.
The Parameter value[{0}] is not correct. [Parameter name:[{1}]
Description
The format of the value of the parameter is incorrect.
Parameter
{0}: Value of the parameter
{1}: Parameter name
Corrective Action
Check whether the format of the value of the parameter is correct.
Firewall doesn't exist in this L-Platform[{0}].
Description
The specified firewall does not exist in the L-Platform.
Parameter
{0}: L-Platform ID
Corrective Action
Check whether the firewall exists in the L-Platform.
When [{0}] is specified, [{1}] cannot be specified.
Description
{1} cannot be specified when {0} is specified.
Parameter
{0}, {1}: Parameter name
Corrective Action
Do not specify {1} when {0} is specified.
Neither the resourceId nor the networkCategory is not specified.
Description
Neither the resource ID nor the network type has been specified.
Corrective Action
Specify either the resource ID or the network type.
The Parameter[{0}] cannot change the value.
Description
The value of the parameter cannot be modified.
Parameter
{0}: Parameter name
Corrective Action
Check whether the value of the parameter can be modified.
Operation doesn't exist.[RulesetName:{0}][Operation-ID{1}]
Description
The operation does not exist.
Parameter
{0}: Ruleset name
{1}: Operation ID
Corrective Action
Check whether the ruleset name and operation ID are correct.
Obtain the correct ruleset name and operation ID with GetLPlatformConfiguration.
Refer to "2.2.6 GetLPlatformConfiguration (Gets Configuration Information for an L-Platform)" in the "Reference Guide (API) CE" for information on the GetLPlatformConfiguration.
Operation is running.
Description
The operation is now running.
Corrective Action
Wait a few moments, then try again.
Failed to operate SLB. [Result Code:{0}]
Description
The operation failed.
Parameter
{0}: Result code of the operation
Corrective Action
If "4" is displayed, check the following, and then try the operation again:
Is there an error in the parameters specified for the operation?
Is there an error in the parameters set in the server load balancer?
If a value other than "4" is displayed, contact the infrastructure administrator.
ROR doesn't manage the container resource pool.
Description
This product is not managing the container resource pool.
Corrective Action
Check whether this product is managing the container resource pool where the specified server is running.
The server of Solaris Containers is included in this L-Platform[{0}], and Blade Logic doesn't exist.
Description
There is a Solaris Zones server in the L-Platform and Blade Logic does not exist.
Parameter
{0}: L-Platform-ID
Corrective Action
The specified API cannot be executed because there is a Solaris Zones server in the L-Platform and Blade Logic does not exist.
The Operation log not acquired exists or Operation is running.
Description
There are operation logs that have not yet been obtained or an operation is in progress.
Corrective Action
Obtain the operation logs if there are operation logs that have not yet been obtained.
If an operation is in progress, obtain the operation log once the operation is complete, then retry.
Specifying only one of cpuPerf and numOfCpu is not allowed if their maximum values are not set.
Description
If a maximum has not been set for both CPU performance and the number of CPUs, it is not permissible to specify only one or the other.
Corrective Action
Take one of the following actions:
Specify both CPU performance and the number of CPUs.
Specify neither CPU performance nor the number of CPUs.
Specify the server type.
The [Disk-Size: {0}] exceed the max disk size according to the image Id assigned.
Description
The disk size exceeds the maximum set for the image.
Parameter
{0}: Disk size
Corrective Action
Change the value so that it does not exceed the maximum image disk size.
The [Disk-Size:{0}] of less than or equal is specified.
Description
The specified value is less than or equal to the current disk size.
Parameter
{0}: Disk size
Corrective Action
Specify a value larger than the current disk size.
Some servers do not satisfy conditions for the operation in this L-Platform[{0}].
Description
The L-Platform contains servers that do not satisfy operating conditions.
Parameter
{0}: L-Platform-ID
Corrective Action
Check the VM type and the OS of the server, and the status of the server management product in the L-Platform.
When the above actions do not solve the problem, collect this message and the investigation data, and then contact Fujitsu technical staff.
Cannot update the firewall in the L-Platform[{0}].
Description
The parameters for the firewall of the specified L-Platform cannot be set in the L-Platform API.
Corrective Action
The parameters for firewalls that do not use rulesets cannot be set in the L-Platform API.
Use the [L-Platforms] tab of the ROR console.
Cannot find the disk resource[{0}].
Description
The specified disk could not be found.
Parameter
{0}: Disk resource ID
Corrective Action
Check whether the specified disk resource ID is correct.
Cannot specify the parameter[{0}].
Description
This parameter cannot be specified.
Parameter
{0}: Parameter name
Corrective Action
Check the specified parameter.
The server cannot be updated or deleted. [LServer-ID:{0}]
Description
The specified server cannot be reconfigured or deleted.
Parameter
{0}: Server ID
Corrective Action
This server cannot be manipulated by this product.
Contact the infrastructure administrator to reconfigure or delete this server if necessary.
The disk cannot be deleted or detached. [Disk-ID:{0}]
Description
The specified disk cannot be deleted or detached.
Parameter
{0}: Disk ID
Corrective Action
The disk cannot be deleted or detached using this software.
If deleting or detaching the disk is necessary, contact the infrastructure administrator.
Cannot use the disk attached to another server. [Disk-ResourceID:{0}]
Description
The specified disk is attached to another server.
Parameter
{0}: Disk resource ID
Corrective Action
Specify another disk.
The Parameter[diskResourceId] cannot be specified for the image. [Store Type:Virtual Disk]
Description
"diskResourceId" cannot be specified if the storage location type for the image is "Virtual Disk".
Corrective Action
Reexecute the command without specifying "diskResourceId".
The L-Platform template contains 2 or more images for VDI. [Template-ID:{0}]
Description
An L-Platform with two or more images for VDI coordination cannot be created.
Parameter
{0}: L-Platform template ID
Corrective Action
Specify an L-Platform template with one or less image for VDI coordination.
The key[vdi-user-domain-name] is not set in the file[vsys_config.xml].
Description
The domain name of VDI user is not set in the setting file.
Parameter
Set the domain name of VDI user.
Refer to"8.5.14.2 Settings for VDI User Names" in the "Operation Guide CE" for information on this setting.
Or re-execute specifying "-vdiUser".
The request body XML is invalid[{0}].
Description
Request body XML is invalid.
Parameter
{0}: Detailed message
Corrective Action
Ensure that the XML set in the request body or the XML input to the file is correct.
Failed to parse the request body XML.
Description
Failed to parse the XML.
Corrective Action
Ensure that the XML set in the request body or the XML input to the file is correct.
The element[{0}] is not set correctly in the request body.
Description
{0} is not set in the request body XML.
Parameter
{0}: Detailed message
Corrective Action
Ensure that the XML set in the request body or the XML input to the file is correct.
