Variable Information
%s: the following three incorrect messages
The required file does not exist.
An error occurred when inputting file.
Other causes.
Cause
The required file does not exist because the program is operating.
An error occurred when inputting or outputting file.
Unknown error.
Resolution
Confirm whether the following files exist in the installation folder of Management Console. In addition, do not modify these file names.
fsw01eja.exe
PCSetting.ini
Confirm whether the folder that is prohibited to be written can be selected as output target path. Or confirm whether the input folder path contains UNICODE character.
Click the [Create] button again.
If it still cannot be created, contact the system administrator.
Cause
The startup password is not entered.
Resolution
Enter startup password.
Cause
The characters (&, \, :, ?, ", ~, ^, ', <, >, |, fullwidth characters and halfwidth space) not allowed are entered in the password.
Resolution
Enter only with characters that can be used.
Cause
The start date of period has exceeded the end date.
Resolution
Select according to the start date <= and end date of period.
Cause
The start time of period is the same as the end time, or the start time has exceeded the end time.
Resolution
Select according to the rules of start time < and end time of period.
Cause
The folder name is too long.
Resolution
It contains the output file name and specify within halfwidth 260 characters.
Cause
The policy application tool is prepared to be performed in the environment without client.
Resolution
Execute under the environment with client.
Cause
The startup password contains control code.
Resolution
The control code cannot be used in startup password.
Variable Information
%s: folder name
Cause
Resolution
When overwriting directly, click the [OK] button, when finishing the processing, click the [Cancel] button.
Variable Information
%1: computer name
%2: name
%3: application type
%4: period that can be executed for policy application tool
%5: time that can be executed for policy application tool
%6: startup password
Cause
Prepare to create policy application tool.
Resolution
When continuing to create, click the [OK] button. When finishing the processing, click the [Cancel] button.
Cause
The period you selected is past time.
Resolution
When continuing, click the [OK] button.
Cause
The name of server to be connected is not entered.
Resolution
Enter the name of server to be connected.
Cause
The group name is not entered.
Resolution
Enter the group name.
Cause
The same group name exists.
Resolution
Modify the group name.
Cause
The value excluding the scope or halfwidth numerals is entered in the transmission monitoring interval of attached data.
Resolution
Enter a value between 1 and 999.
Cause
The value excluding the scope or halfwidth numerals is entered in the transmission monitoring interval (transmitting continuously) of attached data.
Resolution
Enter a value between 0 and 999.
Cause
The value excluding the scope or halfwidth numerals is entered in the invalid interval between the screen capture and the next screen capture.
Resolution
Enter a value greater than 0.
Cause
The value excluding the scope or halfwidth numerals is entered in the maximum number of images that can be saved in the CT.
Resolution
Enter a value between 1 and 999.
Cause
The value excluding the scope or halfwidth numerals is entered in the increasing and decreasing monitoring interval of printer.
Resolution
Enter a value between 15 and 999.
Cause
The value excluding the scope or halfwidth numerals is entered in the printing job monitoring times.
Resolution
Enter a value between 3 and 9.
Cause
The value excluding the scope or halfwidth numerals is entered in the log sending interval.
Resolution
Enter a value between 60 and 9999.
Cause
The value excluding the scope or halfwidth numerals is entered in the interval of continuously sending.
Resolution
Enter a value between 30 and 9999.
Cause
The value excluding the scope or halfwidth numerals is entered in the maximum number of logs that can be sent for one time.
Resolution
Enter a value between 100 and 5000.
Cause
The value excluding the scope or halfwidth numerals is entered in the connection timeout.
Resolution
Enter a value between 30 and 300.
Cause
The value excluding the scope or halfwidth numerals is entered in each log sending interval.
Resolution
Enter a value between 50 and 5000.
Cause
The value excluding the scope or halfwidth numerals is entered in the server connection monitoring interval.
Resolution
Enter a value between 30 and 900.
Cause
The value excluding the range from 1 to 700, or characters excluding the numerals are entered in the aggregated maximum size of original file of file export.
Resolution
Enter a value between 1 and 700.
Cause
The value excluding the range from 1 to 50, or characters excluding the numerals are entered in the maximum size of single file.
Resolution
Enter a value between 1 and 50.
Cause
The screen lock release failure count (Mandatory lock) on the Device operation settings screen is not entered.
Resolution
Enter the screen lock release failure count (Mandatory lock), or remove the check from the check box.
Cause
The screen lock release failure count (Mandatory lock) on the Device operation settings screen is incorrect.
Resolution
Enter the correct screen lock release failure count.
Cause
The screen lock release failure count (Wipe) on the Device operation settings screen is not entered.
Resolution
Enter the screen lock release failure count (Wipe), or remove the check from the check box.
Cause
Business start time on the Device operation settings screen is not entered.
Resolution
Enter the business start time.
Cause
The business start time on the Device operation settings screen is specified outside of the range of 00:00 minutes to 23:59 minutes.
Resolution
Enter the correct business start time.
Cause
The business start time on the Device operation settings screen is not entered.
Resolution
Enter the business start time.
Cause
The business start time on the Device operation settings screen is specified outside of the range of 00:00 minutes to 23:59 minutes.
Resolution
Enter the correct business start time.
Cause
The client management password on the Device operation settings screen is not entered.
Resolution
Enter the client management password.
Cause
The client management password includes the following characters that cannot be used to specify password.
Resolution
Enter the correct client management password.
Cause
The client management password and the re-entered password do not match.
Resolution
Enter the same contents for the client management password and the re-entered password.
Cause
The date on the Business Hours Settings > Advanced Settings screen is not entered.
Resolution
Enter the date.
Cause
The date on the Business Hours Settings > Advanced Settings screen is specified outside the range of 1/1/2000 to 31/12/2037.
Resolution
Enter the correct date.
Cause
The number of registration of business days on the Business Hours Settings > Advanced Settings screen exceeds the maximum number of registrations.
Resolution
Do not exceed the maximum number of registrations.
Cause
Prepare to update terminal operation settings.
Resolution
When updating, click the [OK] button. When stopping the processing, click the [Cancel] button.
Cause
The location for saving attached data specifies CT, and it will be displayed when clicking the [Set] button.
Resolution
When this setting is correct, click the [OK] button. When stopping the processing, click the [Cancel] button.
Cause
The EXE name of application is not entered.
Resolution
Enter the EXE name of application.
Cause
The logon prohibition group is not selected.
Resolution
Select the logon prohibition group.
Cause
The EXE name of printing permission application is not entered.
Resolution
Enter the EXE name of printing permission application.
Cause
An exception occurred in the network environment between Management Console and level control service.
Resolution
Execute again after checking the network environment.
Cause
The group added to the level structure is not is not registered.
Resolution
Register the group added to the level structure.
Cause
The characters not allowed are entered in EXE name of application.
Resolution
Enter characters that can be used in EXE name of application.
Cause
Prepare to update the name or notes of root group.
Resolution
-
Cause
Prepare to update when the group or CT name is empty.
Resolution
Enter characters excluding the blank.
Cause
[EXE Name of Process] is not entered.
Resolution
Enter [EXE Name of Process].
Cause
[Option of Record Operation] is not selected.
Resolution
Select [Option of Record Operation].
Cause
[Option Based on Extension] is not selected.
Resolution
Select [Option Based on Extension].
Cause
The characters not allowed are entered in [EXE Name of Process] (\, /, :, *, ?, ", <, >, |).
Resolution
Enter characters that can be used in [EXE Name of Process].
Cause
[Extension] is not entered.
Resolution
Enter [Extension].
Cause
The characters not allowed are entered in [Extension] (\, /, :, *, ?, ", <, >, |, .).
Resolution
Enter characters that can be used in [Extension].
Variable Information
%d : EXE items of process that can be registered
Cause
The items to be registered have exceeded the items that can be registered.
Resolution
Newly register after deleting the registered and unnecessary information.
Cause
When [Option of Record Operation] cannot be set to [Get All], it will be displayed if EXE name of process is set to [Get All].
Resolution
Enter other values in [Option of Record Operation].
Cause
Prepare to delete the EXE name of process that cannot be deleted.
Resolution
Do not delete the process whose [Whether to be Deleted] is set to [No].
Variable Information
%d : name items of extension that can be registered
Cause
The items to be registered have exceeded the maximum item that can be registered.
Resolution
Newly register after deleting the registered and unnecessary information.
Cause
The fullwidth characters are entered in [EXE Name of Process].
Resolution
Enter characters that can be used in [EXE Name of Process].
Cause
The extension of EXE name of process entered in [EXE Name of Process] is name excluding ".com", ".exe" or ".bin".
Resolution
Specify ".com", ".exe" or ".bin" as extension of EXE name of process entered in [EXE Name of Process].
Cause
The fullwidth characters are entered in [Extension].
Resolution
Enter characters that can be used in [Extension].
Cause
Prepare to delete the extension that cannot be deleted.
Resolution
-
Variable Information
%d : items of printing permission application that can be registered
Cause
The registered items of application that can be printed in each policy setting window have exceeded the maximum item that can be registered.
Resolution
Do not exceed the maximum registration number.
Variable Information
%d : items of startup prohibition application that can be registered
Cause
The registered items of startup prohibition application in each policy setting window have exceeded the maximum item that can be registered.
Resolution
Do not exceed the maximum registration number.
Cause
The update of applied range is not selected.
Resolution
Select between [Only Apply Policy in This CT Group] or [Also Apply in This CT Group and Its Subordinate CT Group].
Cause
When the group tree displays server, it will be displayed if the terminal information of server to be updated is selected.
Resolution
Information update for server cannot be performed.
Cause
EXE name of process and keyword are not entered.
Resolution
Enter EXE name of process and keyword.
Variable Information
%d : items of filter condition that can be registered
Cause
The registration items of filter condition have exceeded the maximum item that can be registered.
Resolution
Do not exceed the maximum registration number.
Cause
The same condition exists in the combination of EXE name of process and keyword.
Resolution
Do not repeat the combination of EXE name of process and keyword.
Cause
The update contents have no changes.
Resolution
-
Variable Information
%d : items of screen capture that can be registered
Cause
The registration items in window title obtaining log and screen capture target list have exceeded the maximum registration item.
Resolution
Do not exceed the maximum registration number.
Cause
The characters excluding the numerals are entered in [Period for Use].
Resolution
Enter numerals in [Period for Use].
Cause
The value excluding year from 2000 to 2037, month from 1 to12 and day from 1 to12 is entered in [Period for Use].
Resolution
Correctly enter a value of [Period for Use].
Cause
The start date entered in [Period for Use]> end date.
Resolution
In [Period for Use], enter according to the start date <=end date.
Cause
The characters excluding numerals are entered in [Using Time].
Resolution
Enter numerical value in [Using Time].
Cause
The value excluding hour from 2 to 23, minute from 0 to 59 is entered in [Using Time].
Resolution
Correctly enter a value of [Using Time].
Cause
The start time entered in [Using Time] > end time.
Resolution
For [Using Time], enter according to start time <= end time.
Cause
The characters not allowed are entered in [Extension] (\, /, :, ?, ", <, >, |, .).
Resolution
Enter characters that can be used in [Extension].
Cause
The wildcard character (*) is entered in the place excluding the beginning or end of [Extension].
Resolution
Correctly enter [Extension].
Cause
The characters excluding numerals are entered in Time of Start Sending of Send Log.
Resolution
Enter numerals in [Time of Starting Sending].
Cause
The value excluding hour from 0 to 23 and minute from 0 to 59 is entered in Time of Start Sending of Send Log.
Resolution
Correctly enter [Time of Starting Sending].
Cause
The value of days that can be decrypted is not entered.
Resolution
Enter a value of days that can be decrypted.
Cause
The input value of days that can be decrypted has exceeded the range from 1 to 999.
Resolution
Correctly enter a value of days that can be decrypted.
Cause
The warning pages are not entered.
Resolution
Enter the warning pages.
Cause
The input warning pages have exceeded the range from 1 to 999999.
Resolution
Correctly enter the warning pages.
Cause
The prohibited printing pages are not entered.
Resolution
Enter the prohibited printing pages.
Cause
The input prohibited printing pages have exceeded the range from 1 to 999999.
Resolution
Correctly enter the prohibited printing pages.
Cause
The input prohibited printing pages are less than the warning pages.
Resolution
Enter a value more than warning pages in the prohibited printing pages.
Cause
The URL string is not entered.
Resolution
Enter URL string.
Cause
The characters not allowed are used in URL character.
Resolution
Use characters that can be entered.
Cause
100 items of website that can be accessed are required to be registered.
Resolution
Register again after deleting the unnecessary websites that can be accessed.
Cause
The IP address is not entered.
Resolution
Enter the IP address.
Cause
The format of IP address is incorrect.
It should be the format of "nnn.nnn.nnn.nnn" (n is a numeral), and the previous 0 can be omitted.
In the case of IPv4, enter the address in "nnn.nnn.nnn.nnn" (n is a numeral) format, and the previous 0 can be omitted.
In the case of IPv6, enter the address in "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx" (x is a hexadecimal character) format. Abbreviated format can be used.
Resolution
Enter IP address in correct format.
Cause
Prepare to register more than 100 items of servers that can be connected.
Resolution
Register again after deleting the unnecessary websites that can be connected.
Cause
Prepare to register more than 100 items of websites that can be downloaded.
Resolution
Register again after deleting the unnecessary websites that can be downloaded.
Cause
The folder name is not entered.
Resolution
Enter a folder name.
Cause
The characters not allowed are used in folder name.
Resolution
Use characters that can be entered.
Cause
The input folder name does not contain drive name.
Resolution
Enter the folder name that contains drive name.
Cause
The full path of selected folder name has exceeded halfwidth 254 characters (fullwidth 127 characters).
Resolution
In the folder name, specify the full path within halfwidth 254 characters (fullwidth 127 characters).
Cause
Prepare to register more than 100 items of arbitrary exclusion folders.
Resolution
Register again after deleting the unnecessary and arbitrary exclusion folder.
Cause
The domain name is not entered.
Resolution
Enter a domain name.
Cause
The characters not allowed are used in domain name.
Resolution
Use characters that can be entered.
Cause
Prepare to register more than 100 items of exclusion domain.
Resolution
Register again after deleting unnecessary exclusion domain.
Cause
The characters not allowed are used in URL string.
Resolution
Use characters that can be entered.
Cause
The value excluding numerals is entered in the value of period for use.
Resolution
Enter a value in the value of period for use.
Cause
The value excluding numerals is entered in the days that can be used.
Resolution
Enter a value in the days that can be used.
Cause
This will be displayed when the value of days set in USB individual identification operation is less than that set in CT operation.
Resolution
Fill according to operation of USB individual identification >=CT operation.
Cause
The following three are the probable causes:
It is not entered.
The value excluding the range was entered;
The characters excluding the numerals were entered.
Resolution
Enter a value between 1 and 999.
Cause
The folder path excluding UNC format is entered in the allowed network folder name.
Resolution
Enter the folder path in UNC format in the allowed network folder name.
Variable Information
%1: Number of items can be registered
%2: Number of halfwidth characters that can be registered
%3: Number of fullwidth characters that can be registered
Cause
The number of paths specified in the excluded folder is excessive, or the total length of the path is excessive.
Resolution
Enter the number of path specified in the excluded folder, and the total length of the path within the values of Number of items can be registered and Number of characters that can be registered displayed in the message.
Cause
The characters used to specify a name exceeds the limit.
Resolution
Specify name by using the characters within the given limit.
Cause
The characters used to specify remarks exceed the limit.
Resolution
Specify the remarks by using the characters within the given limit.
Cause
The characters used to specify folder name exceed the limit.
Resolution
Specify the folder name by using the characters within the given limit.
Cause
The characters used to specify the EXE name of the printing permission application exceed the limit.
Resolution
Specify the EXE name of the printing permission application within the given limit.
Cause
The characters used to specify the EXE name of the startup prohibition application exceed the limit.
Resolution
Specify the EXE name of the startup prohibition application within the given limit.
Cause
The characters used to specify the EXE name of process exceed the limit.
Resolution
Specify the EXE name of process within the given limit.
Cause
The characters used to specify the keyword exceed the limit.
Resolution
Specify the keyword within the given limit.
Cause
Access point name is not entered.
Resolution
Enter the access point name.
Cause
The characters not allowed are used to specify the access point name.
Resolution
Enter characters that can be used to specify the access point name.
Cause
The characters not allowed are used to specify the BSSID.
Resolution
Enter characters that can be used to specify the BSSID.
Cause
BSSID is not entered.
Resolution
Enter the BSSID.
Cause
The Wi-Fi access point is not registered.
Resolution
When Enable connection of registered access points is selected after selecting Prohibit in Wi-Fi connection prohibition, register at least one Wi-Fi access point.
Variable Information
%1: Items that can be registered
Cause
A number of registered access point names exceeds the allowed maximum number of registrations.
Resolution
Specify the number of registered access point names within the given limit.
Cause
The Bluetooth device name is not entered.
Resolution
Enter the Bluetooth device name.
Cause
The characters not allowed are used to specify the Bluetooth device name.
Resolution
Enter the characters that can be used to specify the Bluetooth device name.
Cause
MAC address is not entered.
Resolution
Enter the MAC address.
Cause
The characters not allowed are used to specify the MAC address.
Resolution
Enter the characters that can be used to specify the MAC address.
Variable Information
%1: Number of items that can be registered
Cause
The number of registered Bluetooth devices exceeds the allowed maximum number of registrations.
Resolution
Specify the number of Bluetooth registrations within the given limit.
Cause
A package name is not entered.
Resolution
Enter the package name.
Cause
The characters not allowed are used to specify the package name.
Resolution
Enter the characters that can be used to specify the package name.
Variable Information
%1: Number of items that can be registered
Cause
A number of registered package names exceeds the allowed maximum number of registrations.
Resolution
Specify the number of package name registrations within the given limit.
Cause
"/" is not entered at the beginning of the folder name.
Resolution
Enter the folder name beginning with "/".
Cause
The characters used to specify the access point name exceed the limit.
Resolution
Specify the access point names within the given limit.
Cause
The characters used to specify the Bluetooth device name exceed the limit.
Resolution
Specify the Bluetooth device name within the given limit.
Cause
The characters used to specify the package name exceed the limit.
Resolution
Specify the package name within the given limit.
Cause
The characters used to specify the folder name exceed the limit.
Resolution
Specify the folder name within the given limit.
Cause
The setting contents can be reflected to server (DB).
Resolution
Click the [OK] button.
Cause
The setting information of server is modified.
Resolution
-
Cause
The setting information of server is modified.
Resolution
After the policy set in Management Console is updated and connected to Management Server/Master Management Server, determine whether it can be reflected to CT of target.
Cause
The setting contents are modified.
Resolution
After the policy set in Management Console is updated and connected to Management Server/Master Management Server, determine whether the updated contents can be reflected to CT of target.
Variable Information
%s : CT group name
Cause
Prepare to immediately update the selected CT group, its subgroup and CT policy information.
Resolution
When updating the policy information of selected CT group only, click the [OK] button after selecting [Apply Policy to This CT Group Only]. When updating the policy information of selected CT group, its subgroup and CT, click the [OK] button after selecting [Apply Policy to This CT Group and Its Subordinate Group and CT]. When stopping the processing, click the [Cancel] button.
Variable Information
%s : CT group name
Cause
Prepare to update the selected CT group, its subgroup and CT policy information at next startup.
Resolution
When updating the policy information of selected CT group only, click the [OK] button after selecting [Apply Policy to This CT Group Only]. When updating the policy information of selected CT group, its subgroup and CT, click the [OK] button after selecting [Apply Policy to This CT Group and Its Subordinate Group and CT]. When stopping the processing, click the [Cancel] button.
Variable Information
%s : CT name
Cause
Prepare to immediately update the policy information of selected CT.
Resolution
When updating, click the [OK] button. When stopping the processing, click the [Cancel] button.
Variable Information
%s : CT name
Cause
The selected CT is prepared to update the get policy information at next startup.
Resolution
When updating, click the [OK] button. When stopping the processing, click the [Cancel] button.
Cause
This will be displayed before importing configuration information from Systemwalker Desktop Patrol.
Resolution
Determine whether to import by Systemwalker Desktop Patrol configuration information import command. When it is OK for only one time, click the [OK] button. When the import is performed by Systemwalker Desktop Patrol configuration information import command, click the [Cancel] button. Generally, operate by Systemwalker Desktop Patrol configuration information import command.
Variable Information
%1: CT name
Cause
It is the confirming message when starting policy application tool.
Resolution
When starting the policy application tool, click the [OK] button. When it is not started, click the [Cancel] button.
Cause
This could be caused because:
The level control service of connected target server has stopped.
The IP address settings of connected target server are incorrect.
An exception occurred in the network environment.
Under the 3-level structure, when the structure reflection processing is performed from connecting the Management Console of Master Management Server to lower level Management Server, the update processing needs much more time.
As the Management Console is newly installed on the Management Server whose version is upgraded, the port number does not match.
The communication port of level control service (communication target) used for connecting server is not allowed by the firewall connected to server.
Resolution
Execute again after checking the status and network environment of level control service of connected target server.
When the IP address of connected target server is incorrect, overwrite the installation or reinstall the Management Console, and specify the correct IP address.
When it takes too much time for update processing, refresh later and confirm whether the update processing is completed.
When the port number does not match, process as one of the follows:
Overwrite the installation of Management Console and specify the correct port number.
Modify the port number of the Management Server through the server settings tool.
Modify the settings of firewall so that the communication port of level control service used for connecting server can communicate with Management Console.
Cause
The system environment or database of level control service is not complete.
Resolution
Contact Fujitsu technical staff.
Cause
-
Resolution
-
Cause
Prepare to copy the policy.
Resolution
When copying the policy, and the contents are immediately reflected to client, click the [Yes] button. When only copying the policy, click the [No] button. When the copying is finished, click the [Cancel] button.
Variable Information
%s : CT group name
Cause
Prepare to delete the CT group.
Resolution
When deleting, click the [OK] button. When stopping the processing, click the [Cancel] button.
Variable Information
%d : selected number of sets of CT
%s : selected CT name
Cause
Prepare to delete CT.
Resolution
When deleting, click the [OK] button. When stopping the processing, click the [Cancel] button.
Cause
The control data is not set.
Resolution
Set the control data.
Cause
The memory is insufficient.
Resolution
Execute again after ending the unnecessary application.
Cause
Failed to connect to the level control service when recording the operation history. This could be caused because:
The level control service of connected target server has been stopped.
An exception occurred in the network environment.
Resolution
Perform the same operation after confirming the connection status of network, and the startup status of level control service of the Management Server.
Cause
Prepare to update immediately again in immediate update processing.
Resolution
Perform the immediate update processing again after immediate update processing. After immediate update processing is finished, the information to prompt end will be displayed.
Variable Information
%1 : items of target CT with immediate update
%2 : Number of CT items to which the policy was successfully sent
Cause
The setting contents are reflected to server (DB).
In addition, when performing the immediate update, items of target CT and items of CT whose immediate update is finished can be displayed.
Resolution
-
Cause
Prepare to perform the processing in the main window in the course of CT/CT group searching processing.
Resolution
Click the [OK] button.
Cause
Under the 3-level system structure, the management of user information is set to "Collectively Manage on the Master Management Server", it will be displayed when connecting to the lower level Management Server.
Resolution
When registering user information, user group information, user policy information and department administrator information of user group, connect to the Master Management Server. Continue when performing other operations.
Cause
An exception occurred in the network environment of Management Console and level control service.
Resolution
Execute again after checking the network environment.
Cause
-
Resolution
-
Cause
Execute the process control.
Resolution
Confirm whether to execute.
Cause
Prepare to get the process list.
Resolution
Determine whether to get.
Cause
Prepare to stop the process.
Resolution
When stopping, click the [OK] button. When stopping the processing, click the [Cancel] button.
Cause
The configuration value is not selected.
Resolution
Select the configuration value.
Cause
The target CT does not exist. Or an exception occurred in the network environment of Management Console and level control service.
Resolution
Execute again after checking the network environment.
Cause
-
Resolution
-
Cause
Execute the services control.
Resolution
Confirm whether to execute.
Cause
Prepare to get the service list.
Resolution
Determine whether to get.
Cause
The output file name is not entered in window specified by each CSV export file.
Resolution
Enter the output file name.
Cause
In the window specified by each CSV export file, the characters used to specify the output file name exceed the limit,
Resolution
Enter the output file name within the given limit.
Cause
In the window specified by each CSV output file, the input format of output file is incorrect.
Resolution
Correctly enter the drive name, path name and file name.
Cause
In the window specified by each CSV output file, the characters that cannot be used in output file name are used.
Resolution
Use characters that can be entered.
Variable Information
%s : name of file failed to be opened
Cause
Failed to open the CSV file. [Preparation of device is not finished], [Access is refused], [Writing to this media is prohibited] or [Specified path cannot be found] is displayed in the window (%s of above mentioned message).
Resolution
Confirm the following status:
Whether the device is connected to the disk;
Whether prepare to write data to the disk that sets file export prohibition
Whether the writing is prohibited (the media is in write protected status, or the file is read-only)
Whether the specified path exists.
Cause
Insufficient disk capacity leads to fail to write CSV file.
Resolution
Confirm whether the free space of disk is sufficient.
Cause
The characters not allowed are used in the output file name of window specified by output file.
Resolution
Use characters that can be entered.
Cause
The specified file has already existed in the window specified by output file.
Resolution
Specify the file that does not exist.
Cause
The import file that does not exist is specified.
Resolution
Execute again after confirming whether the specified path is correct.
Cause
The result log file that does not exist is specified.
Resolution
Execute again after confirming whether the specified path is correct.
Cause
Failed to open the result log file.
Resolution
Execute again after confirming whether the specified path is correct.
Cause
Failed to open the configuration information file.
Resolution
Execute again after confirming whether the specified path is correct.
Cause
The [Import File] is not entered in CSV input of department administrator.
Resolution
Enter [Import File].
Cause
When specifying Import File, the full path length has exceeded the maximum character number that can be entered.
Resolution
Shorten the full path length of Import File.
Cause
In CSV input of department administrator, the drive name, path name and file name of [Import File] are incorrect.
Resolution
Enter in the format containing drive name, path name and file name in [Import File].
Cause
The characters that cannot be used in file name are entered.
Resolution
Use characters that can be used in file name.
Cause
[Result Log File] is not entered in the CSV input and output of department administrator.
Resolution
Enter [Result Log File].
Cause
When specifying Result Log File, the full path length has exceeded the maximum character number that can be entered.
Resolution
Shorten the full path length of Result Log File.
Cause
In CSV input and output of department administrator, the drive name, path name and file name of [Result Log File] are incorrect.
Resolution
Enter the result log file in the format containing drive name, path name and file name.
Cause
The characters not allowed are entered in file name.
Resolution
Enter characters that can be used in file name.
Cause
Failed to open [Import File] in CSV input of department administrator.
Resolution
Execute again after confirming whether the specified path is correct.
Cause
Failed to open [Export File] in CSV output of department administrator.
Resolution
Confirm the following status:
Whether the device is connected to the disk.
Whether prepare to write data to disk that set file export prohibition.
Whether the writing is prohibited (the media is in write protected status, or the file is read-only).
Whether the specified path exists.
Cause
CSV file output of CT information is ended normally.
Resolution
Click the [OK] button.
Cause
CSV file output of user information is ended normally.
Resolution
Click the [OK] button.
Cause
CSV file output of configuration information is ended normally.
Resolution
Click the [OK] button.
Cause
The department administrator CSV output of CT group is finished.
Resolution
Click the [OK] button.
Cause
The department administrator CSV output of user group is finished.
Resolution
Click the [OK] button.
Cause
The USB device information file output is finished.
Resolution
Click the [OK] button.
Cause
The IP address file output of subordinate CT is finished.
Resolution
Click the [OK] button.
Cause
The CSV file output of CT group information is finished.
Resolution
Click the [OK] button.
Variable Information
%s : existed CSV output file name
Cause
The specified output file has existed in the window specified by each CSV output file.
Resolution
When overwriting, click the [OK] button. When stopping the processing, click the [Cancel] button.
Cause
The service is not normally operating. Or an exception occurred in the network environment of Management Console and level control service.
Resolution
Execute again after checking the network environment.
Cause
The service is not normally operating. Or an exception occurred in the network environment of Management Console and level control service.
Resolution
Execute again after checking the network environment.
Cause
Select the group, or select several CTs.
Resolution
Select one CT.
Cause
The CT is not selected.
Resolution
Select CT.
Cause
The group or CT is not selected.
Resolution
Select the group or CT.
Cause
The specified saving path of manual cannot be found.
Resolution
Contact Fujitsu technical staff.
Cause
The target data reflected by structure does not exist.
Resolution
Select [Refresh Tree] from the [Tree Settings] menu to get the newest CT group tree information.
Cause
Failed to collect the remote data. This could be caused because:
The target CT is not powered.
The service of target CT has stopped.
An exception occurred in the network environment.
Resolution
Execute again after confirming the status of target CT and network.
Cause
Request to remote control ended abnormally.
Resolution
Confirm the status of the target CT and the network status, and then execute the same operation again.
Cause
Remote control status clearing ended abnormally.
Resolution
Confirm the status of the target CT and the network status, and then execute the same operation again.
Cause
Attempted to clear the remote control execution state while the remote control is in operation.
Resolution
Clear the remote control execution state after the remote control processing is complete.
Cause
When performing the immediate update processing, prepare to end the program.
Resolution
End the Management Console after ending the immediate update processing. The message to prompt ending will be displayed after the immediate update processing is finished.
Cause
The modified contents exist in the settings of CT group tree or user group tree.
Resolution
For reflecting the modified setting contents, perform [Updating Configuration of CT Group] or [Updating Configuration of User Group].
Cause
This will be displayed after collecting the remote data.
Resolution
Click the [OK] button.
Cause
If the CT debugging trace is set to [Summary] or [Details], it will be displayed when the entrust is normally executed for CT.
Resolution
Click the [OK] button.
Cause
If the CT debugging trace is set to [No], it will be displayed when the entrust is normally executed for CT.
Resolution
Click the [OK] button.
Cause
Request to remote control ended normally.
Resolution
Click the OK button.
Cause
Clearing the remote control state ended normally.
Resolution
Click the OK button.
Cause
The setting contents of level structure are modified.
Resolution
Determine whether to update.
Cause
The data that is not updated exists.
Resolution
Determine whether to execute.
Cause
Prepare to refresh.
Resolution
Determine whether to refresh.
Cause
Prepare to get the trace log.
Resolution
Select whether to get.
Cause
The level structure is modified, but the [User Policy Settings] window shall be closed when the status is not reflected.
Resolution
When directly closing, click the [OK] button. When stopping the processing, click the [Cancel] button.
Cause
It is the confirming message before collecting the remote data.
Resolution
When collecting the remote data, click the [OK] button. When stopping the processing, click the [Cancel] button.
Cause
Prepare to set the CT debugging trace as [Summary] or [Details].
Resolution
When collecting the CT debugging trace log, click the [OK] button. When stopping the processing, click the [Cancel] button.
Cause
Prepare to set the CT debugging trace as [No].
Resolution
When the CT debugging trace log is not collected, click the [OK] button. When stopping the processing, click the [Cancel] button.
Variable Information
%s : server name of target
Cause
Prepare to refresh the level structure of displayed server.
Resolution
When it is required to refresh the level structure of displayed server, click the [OK] button. When stopping the processing, click the [Cancel] button.
Cause
Prepared to execute the mandatory lock on CT.
Resolution
Click Yes to execute mandatory lock, and No to not to execute the lock.
Cause
Prepared to release of mandatory lock on CT.
Resolution
Click Yes to release the mandatory lock, and No to not to release the lock.
Cause
Prepared to execute wipe on CT.
Resolution
Click Yes to execute wipe, and No to not to execute the wipe.
Cause
Prepared to delete the data on CT.
Resolution
Click Yes to delete the data, and No to not to delete the data.
Cause
Prepare to clear the remote control state of the client (CT).
Resolution
Click Yes to clear the remote control state and No to not to clear the state.
Cause
Prepare to clear the passcode of the client (CT).
Resolution
Click Yes to clear the passcode and No to not to clear the passcode.
Variable Information
%s : Name of CT failed to be moved
Cause
Prepare to move the CT to server group that is different from server where CT registers.
Resolution
Move to the server group that is logged on.
Cause
Prepare to specify the level more than 100 levels.
Resolution
Change the level to less than 100 levels.
Variable Information
%s : name of CT or CT group before movement
Cause
When displaying the server or Active Directory Linkage, prepare to move the CT group or CT to the root directory.
Resolution
-
Variable Information
%s : name of CT or CT group before movement
Cause
Prepared to move the CT or CT group to the domain or CT group created in Active Directory Linkage.
Resolution
This operation cannot be performed. Click the [OK] button.
Variable Information
%s : name of CT or CT group before movement
Cause
When the department administrator performs the operation, prepared to move the CT or CT group to CT group without authority.
Resolution
This operation cannot be performed. Click the [OK] button.
Variable Information
%s : name of CT or CT group before movement
Cause
When the domain linkage is performed, prepared to move the CT or CT group to server.
Resolution
This operation cannot be performed. Click the [OK] button.
Cause
When Active Directory Linkage is performed, prepare to move the user group or user to the root directory.
Resolution
Click the [OK] button. When Active Directory Linkage is performed, the user group or user cannot be moved to the root directory, so move it to Local directory.
Variable Information
%1: CT group name
Cause
Prepare to drag and drop the CT group to the folder that is not configured.
Resolution
CT group cannot be moved to the folder that is not configured.
Variable Information
%1: CT name
Cause
Prepare to drag and drop CT to the root directory.
Resolution
CT cannot be moved to the root directory.
Variable Information
%1: CT name
Cause
Prepare to drag and drop CT to the server.
Resolution
CT cannot be moved to server.
Variable Information
%1: CT name
Cause
Prepare to drag and drop CT to Local.
Resolution
CT cannot be moved to Local.
Cause
The characters used to specify the group name exceed the limit.
Resolution
Specify the group name by using the characters within the given limit.
Cause
The password remains the same as the default set during the installation.
Resolution
Change the password by following the displayed method.
Cause
The user ID is not entered.
Resolution
Enter the user ID.
Cause
The password is not entered.
Resolution
Enter the password.
Cause
The information of connected target server is not complete.
Resolution
Execute again after confirming the information of corresponding servers.
Cause
Authentication failed.
Resolution
Confirm the user ID and password.
Cause
The database environment is not complete.
Resolution
Contact Fujitsu technical staff.
Cause
The connected target server is not selected in the authentication dialog box.
Resolution
Select the target server name to be connected.
Cause
The version of product preparing to connect Master Management Server of Management Console is different.
Resolution
Confirm the version of product to connect to the Management Server in the server settings tool and for the old version, upgrade the version.
Cause
The characters excluding the numerals, alphanumeric characters (A to F, a to f), period (.), and colon (:) are entered in IP address (searching conditions) of CT/CT group searching window.
Resolution
Confirm the value entered in IP address.
Cause
The format of the IP address (searching conditions) in CT/CT group searching window is incorrect.
In the case of IPv4, enter the address in "nnn.nnn.nnn.nnn" (n is a numeral) format, and the previous 0 can be omitted.
In the case of IPv6, enter the address in "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx" (x is a hexadecimal character) format. Abbreviated format can be used.
Resolution
Confirm the value entered in IP address.
Cause
The MAC address (searching conditions) in CT/CT group searching window is not entered in the format of XX-XX-XX-XX-XX-XX.
Resolution
Confirm the value entered in MAC address.
Cause
In the CT/CT group searching window, the characters excluding numerals and period are entered in CT version (searching conditions).
Resolution
Confirm the value entered in CT version.
Cause
The CT version (searching conditions) in CT/CT group searching window is not entered in the format of X.X.X.X.
Resolution
Confirm the value entered in CT version.
Cause
The characters excluding numerals are entered in last logon day (searching conditions) in the CT/CT group searching window.
Resolution
Confirm the value entered in last logon day (start).
Cause
The last logon day (searching conditions) in the CT/CT group searching window is not entered in the format of mmddyyyy.
Resolution
Confirm the value entered in last logon day (start).
Cause
The characters excluding numerals are entered in last logon end date (searching conditions) in CT/CT group searching window.
Resolution
Confirm the value entered in last logon day (end).
Cause
The last logon day (searching conditions) in the CT/CT group searching window is not entered in the format of mmddyyyy.
Resolution
Confirm the value entered in last logon day (end).
Cause
The characters excluding numerals are entered in the start date (searching conditions) of updating client policy in the CT/CT group searching window.
Resolution
Confirm the value entered in date (start) of updating client policy.
Cause
The start date (searching conditions) of updating client policy in the CT/CT group searching window is not entered in the format of mmddyyyy.
Resolution
Confirm the value entered in date (start) of updating client policy.
Cause
The characters excluding numerals are entered in the end date (searching conditions) of updating client policy in the CT/CT group searching window.
Resolution
Confirm the value entered in date (end) of updating client policy.
Cause
The end date (searching conditions) of updating client policy in the CT/CT group searching window is not entered in the format of mmddyyyy.
Resolution
Confirm the value entered in date (end) of updating client policy.
Cause
When clicking the search button in the CT/CT group searching window, the group of searching target has been moved or deleted.
Resolution
Close the searching window first, and display the searching window again after selecting the group again.
Cause
The date that does not exist is entered in last logon day (searching conditions) in the CT/CT group searching window.
Resolution
Confirm the value entered in last logon day (start).
Cause
The date that does not exist is entered in last logon day (searching conditions) in the CT/CT group searching window.
Resolution
Confirm the value entered in last logon day (end).
Cause
The date that does not exist is entered in the date (searching conditions) of updating client policy in the CT/CT group searching window.
Resolution
Confirm the value entered in the date (start) of updating client policy.
Cause
The date that does not exist is entered in the date (searching conditions) of updating client policy in the CT/CT group searching window.
Resolution
Confirm the value entered in the date (end) of updating client policy.
Cause
In the value entered in CT/CT group searching window, the last logon start date > last logon end date.
Resolution
Confirm the value entered in last logon day (start - end).
Cause
In the value entered in CT/CT group searching window, the start date of updating client policy > end date of updating client policy.
Resolution
Confirm the value entered in date of updating client policy (start - end).
Cause
The characters excluding hexadecimal values and hyphen are entered in MAC address.
Resolution
Enter characters that can be used in MAC address.
Cause
The device name is not entered in USB device logon window.
Resolution
Enter a device name.
Cause
In USB device logon window, the characters not allowed are used in device name.
Resolution
Enter characters that can be used in device name.
Cause
In USB device logon window, when the identification method is [Match Completely], the internal serial number is not entered.
Resolution
Enter the internal serial number.
Cause
In USB device logon window, the characters not allowed are used in the internal serial number.
Resolution
Enter characters that can be used in internal serial number.
Cause
In USB device logon window, the USB device name is not entered.
Resolution
Enter a USB device name.
Cause
In USB device logon window, the characters not allowed are used in the USB device name.
Resolution
Enter characters that can be used in the USB device name.
Cause
In USB device logon window, the characters not allowed are used in the notes.
Resolution
Enter characters that can be used in the notes.
Cause
In the USB device registration window, the USB devices to be registered have exceeded 10,000 items.
Resolution
Newly log on after deleting the unnecessary USB devices.
Cause
In the USB device registration window, it will be displayed when preparing to delete the deleted USB devices.
Resolution
Restart the USB device registration window, and confirm whether the corresponding USB devices have been deleted.
Cause
In the USB device registration window, the maker ID is not entered.
Resolution
Enter a maker ID.
Cause
In the USB device logon window, the entered maker ID has exceeded the range from 0000 to FFFF.
Resolution
In the maker ID, enter a value within a range from 0000 to FFFF.
Cause
In the USB device logon window, the product ID is not entered.
Resolution
Enter a product ID.
Cause
In the USB device logon window, the entered product ID has exceeded the range from 0000 to FFFF.
Resolution
In the product ID, enter a value within a range from 0000 to FFFF.
Cause
In the USB device logon window, prepare to update the prompted information of logged USB device.
Resolution
Click the [Update] button when modifying the logon contents.
Cause
In the USB device logon window, when clicking the [Get USB Device Information] button, it is prompted that this information cannot be get. None of USB device is inserted into the USB terminal, or the inserted USB device cannot be identified in this system.
Resolution
Confirm whether the USB device is inserted into the USB terminal.
When the inserted USB device in USB terminal cannot be identified by this system, insert again.
Cause
In the USB device logon window, when clicking the [Get USB Device Information] button, the information cannot be get. The device is not normally identified.
Resolution
Execute again after this device is correctly identified by the system.
Cause
When deleting several USB devices, there are already deleted devices in USB device.
The administrator who performs operation in the other Management Console may have deleted the device.
Resolution
As this USB device has been deleted, it is not required to perform the processing.
Cause
When the period for use of several USB devices are prolonged, there are already deleted devices in USB device.
The USB device displayed in Management Console actually is deleted because:
The administrator who performs operations in the other Management Console may have deleted this device.
Resolution
As this USB device has been deleted, it is not required to perform the processing.
Cause
[Period for Use] is not entered.
Resolution
Enter [Period for Use]. Any of [Year], [Month] and [Day] is required to be filled.
Cause
Probable causes are as follows:
The date before January 1st, 2000 is entered.
The date after December 31th, 2037 is entered.
The characters excluding numerals are entered.
Resolution
Enter a date between January 1stst, 2000 and December 31th, 2037.
Cause
When preparing to delete the USB device, the selected USB device has been deleted.
The administrator who performs operation in the other Management Console may have deleted the device.
Resolution
As this USB device has been deleted, it is not required to perform the processing.
Cause
The characters used to specify the internal serial number exceed the limit.
Resolution
Specify the internal serial number by using the characters within the given limit.
Cause
The characters used to specify the USB device name exceed the limit.
Resolution
Specify the USB device name by using the characters within the given limit.
Cause
The characters used to specify remarks exceed the limit.
Resolution
Specify the remarks by using the characters within the given limit.
Cause
The characters used to specify the device name exceed the limit.
Resolution
Specify the device name by using the characters within the given limit.
Cause
In the USB device logon window, it will be displayed when [Get USB Device Information] (clicking this button) is performed for logged-on USB.
Resolution
-
Cause
When adding device, the device has logged on master, but in the list display, as the small range display of USB is set, this device information is not displayed.
Resolution
Add the device after removing the small range display of USB device.
Cause
In the USB device logon window, it is the prompted information when preparing to delete USB device.
Resolution
When deleting, click the [OK] button. When stopping the processing, click the [Cancel] button.
Cause
The characters not allowed are entered in [User Name] (\ / : * ? " < > | [ ] ; = , +).
Resolution
In [User Name], enter again with characters that can be used.
Cause
[User Name] is not entered.
Resolution
Enter [User Name].
Cause
The character (only period) that cannot be used is entered in [User Name].
Resolution
In [User Name], enter again with characters that can be used.
Cause
Flaws exist in the system environment of Management Console.
Resolution
Contact Fujitsu technical staff.
Cause
[Import File] is not entered.
Resolution
Enter [Import File].
Variable Information
%1: the maximum character number of import file name (Halfwidth)
%2 : the maximum character number of import file name (Fullwidth)
Cause
The length of [Import File] has exceeded the maximum character number that can be entered.
Resolution
Specify [Import File] by using the characters less than the maximum number of characters.
Cause
When specifying [Import File], the drive name, path name or file name is incorrect.
Resolution
When specifying [Import File], enter in the format containing drive name, path name and file name.
Cause
The characters that cannot be used for file name are entered.
Resolution
Enter again with characters that can be used in the file name.
Cause
[Result Log File] is not entered.
Resolution
Enter [Result Log File].
Variable Information
%1: the maximum character number of full path of result log file (Halfwidth)
%2: the maximum character number of full path of result log file (Fullwidth)
Cause
When specifying [Result Log File], the full path length has exceeded the maximum character number that can be entered.
Resolution
Cut the full path length of [Result Log File].
Cause
When specifying [Result Log File], the entered drive name, path name or file name is incorrect.
Resolution
When specifying [Result Log File], enter in the format containing drive name, path name and file name.
Cause
The characters that cannot be used for file name are entered.
Resolution
Enter again with characters that can be used in the file name.
Variable Information
%d : the maximum logon number of user policy
Cause
The items to be logged-on have exceeded the maximum number that can be logged-on.
Resolution
Newly register after deleting the logged-on and unnecessary information.
Cause
The user information is not entered (position, department name, department code, notes).
Resolution
Enter the user information.
Cause
The import file and result log file are specified as files with same name.
Resolution
For import file name and result log file, specify them as different names.
Cause
The characters that cannot be used for file name are entered in execution log.
Resolution
Enter again with characters that can be used in the file name.
Cause
The characters that cannot be used for file name are entered in import file.
Resolution
Enter again with characters that can be used in the file name.
Cause
The user name entered in the user information has registered.
Resolution
Enter an IP that is different from the registered ID name.
Cause
The user name cannot be modified.
Resolution
Create as a new user name.
Cause
The export file and result log file are specified as file of same file name.
Resolution
For export file name and result log file, specify them as different names.
Cause
The selected file path and total length of file name may be too long. Therefore, when performing the import processing, the part exceeding halfwidth 218 characters (fullwidth 109 characters) will be deleted.
Resolution
Confirm the entered file name. Specify the total length of selected folder file name within halfwidth 218 characters (fullwidth 109 characters).
Cause
The selected file path and total number of characters of file name may be too long. Therefore, when performing the import processing, the part exceeding the limit will be deleted.
Resolution
Confirm the entered file name. Specify the total length of selected folder file name within the given limit.
Cause
The selected file path and total characters of file name may be too long. Therefore, when performing the import processing, the part exceeding the limit will be deleted.
Resolution
Confirm the entered file name. Specify the total length of selected folder file name within the given limit.
Cause
The characters used to specify the user name exceed the limit.
Resolution
Specify the user name by using the characters within the given limit.
Cause
The characters used to specify the user's name exceed the limit.
Resolution
Specify the user's name by using the characters within the given limit.
Cause
The characters used to specify the employee number exceed the limit.
Resolution
Specify the employee number by using the characters within the given limit.
Cause
The characters used to specify the post exceed the limit.
Resolution
Specify the post by using the characters within the given limit.
Cause
The characters used to specify the group name exceed the limit.
Resolution
Specify the group name by using the characters within the given limit.
Cause
The characters used to specify the organization name exceed the limit.
Resolution
Specify the organization name by using the characters within the given limit.
Cause
The characters used to specify the organization code exceed the limit.
Resolution
Specify the organization code by using the characters within the given limit.
Cause
The characters used to specify the remarks exceed the limit.
Resolution
Specify the organization code by using the characters within the given limit.
Cause
The characters used to specify the group name exceed the limit.
Resolution
Specify the group name by using the characters within the given limit.
Cause
It is the update confirming information of user information.
Resolution
Determine whether to update.
Cause
It is the confirmation information of CSV file import.
Resolution
Determine whether to import.
Cause
Update confirmation.
Resolution
Determine whether to update.
Cause
It is the information update confirmation of user information (notes).
Resolution
Determine whether to update.
Variable Information
%d : number of selected user policies
Cause
It is the deletion confirmation of user policy.
Resolution
Determine whether to delete.
Cause
In the user/user group searching window, preparing to perform operation similar to modify the level status, or to perform the operation of modifying the displayed contents. (Example: Refresh Display and Not Display Empty Group, etc.)
Resolution
Perform this processing again after the searching is finished.
Variable Information
%s : group name
Cause
Delete the user group.
Resolution
When deleting, click the [OK] button. When stopping processing, click the [Cancel] button.
Cause
It is required to copy policy for the other user.
Resolution
When copying policy, click the [OK] button. When stopping processing, click the [Cancel] button.
Variable Information
%1 : number of users to be deleted
%2 : user name (separate by commas and display in parallel) to be deleted
Cause
It is required to delete the user.
Resolution
When deleting, click the [OK] button. When stopping processing, click the [Cancel] button.
Variable Information
%s : user name to be added
Cause
Prepare to add the user.
Resolution
When adding, click the [OK] button. When stopping processing, click the [Cancel] button.
Cause
Click the logon button in the confirmation window set by the department administrator of CT group, or the user group.
Resolution
When logging on, click the [OK] button. When stopping processing, click the [Cancel] button.
Cause
The size of the configuration information file is incorrect. The configuration information file may be 0 bytes.
Resolution
Confirm whether the configuration information file is normal.
Cause
-
Resolution
-
Cause
-
Resolution
-
Cause
Failed to open the temporary file.
Resolution
Confirm the execution environment. (free space of disk, etc.)
Variable Information
%d : detail error code
Cause
Failed to output the configuration information.
Resolution
Confirm the execution environment. (free space of disk, etc.)
Cause
-
Resolution
-
Cause
In the selection window of allowed device, more than 100 USB devices have been logged on.
Resolution
Delete the unnecessary USB devices and control the number of device to within 100 items.
Cause
In File Export/Reading, the Explorer will not perform USB device individual identification and all USB devices are allowed to be used. At the moment, if the USB device individual identification function is to be set to valid, it can only be achieved by File Export Utility.
Resolution
If the Explorer also wants to achieve USB device individual identification, reset the option of file access restriction in File Export/Reading.
Cause
The original password is not entered in the password modifying window.
Resolution
Enter the original password.
Cause
The new password is not entered in the password modifying window.
Resolution
Enter the new password.
Cause
The confirm password is not entered in the password modifying window.
Resolution
Enter the confirm password.
Cause
In the password modifying window, the entered new password does not match the confirm password.
Resolution
Correctly enter the new password and confirm password.
Cause
In the password modifying window, the entered original password is incorrect.
Resolution
Enter the correct original password.
Cause
In the password modifying window, the original password is entered incorrectly three times.
Resolution
Modify the password again after logging on to the Management Console again.
Cause
After logging on the Management Console, prepare to modify the password in other terminals. The password cannot be modified.
In addition, as the authentication failed, the operation of the Management Console will be stopped.
Resolution
The original password has been modified and confirm it with the administrator.
Cause
The entered password contains characters not allowed.
Resolution
Enter the password containing allowed characters.
Cause
The user ID for the present use has been deleted.
Resolution
Confirm the user ID and access authority with the administrator.
Cause
It is the confirmation information when modifying the password.
Resolution
When modifying the password, click the [OK] button. When stopping the processing, click the [Cancel] button.
