Event traps are messages reported from a device. If you have any questions about the message contents, refer to the relevant hardware manual to take corrective actions.
Depending on the event level, the corresponding icon may turn red (Error) or yellow (Warning).
(In case of the level "Information", the icon color is not changed.)
Information
The message contents may differ depending on the Data ONTAP(R) version and the event.
Failure Event | Level | Event Display |
|---|---|---|
User definition error | Information | The device trap message is output as is. |
DHM Disk Degrade-I/O | Warning | The device trap message is output as is. |
DHM Disk Predictive Failure | Warning | The device trap message is output as is. |
User definition (urgent) | Error | The device trap message is output as is. Display example is as follows: userDefined == 20670538 priority == informational |
User definition (caution) | Error | The device trap message is output as is. Display example is as follows: userDefined == 20670538 priority == informational |
User definition (important) | Error | The device trap message is output as is. Display example is as follows: userDefined == 20670538 priority == informational |
User definition (error) | Error | The device trap message is output as is. Display example is as follows: userDefined == 20670538 priority == informational |
User definition (warning) | Warning | The device trap message is output as is. Display example is as follows: userDefined == 20670538 priority == informational |
User definition (notice) | Information | The device trap message is output as is. Display example is as follows: userDefined == 20670538 priority == informational |
User definition (information) | Information | The device trap message is output as is. Display example is as follows: userDefined == 20670538 priority == informational |
User definition (debug) | Information | The device trap message is output as is. Display example is as follows: userDefined == 20670538 priority == informational |
Shutdown because of an exceeded time limit in degrade mode | Error | The device trap message is output as is. Display example is as follows: data disk in RAID group /vol1/plex0/rg0 is broken. Halting system now. |
Disk failure | Error | The device trap message is output as is. Display example is as follows: data disk in RAID group /vol1/plex0/rg0 is broken. |
Disk recovery | Information | The device trap message is output as is. |
Shutdown because of a fan failure | Error | The device trap message is output as is. Display example is as follows: Multiple chassis fan enclosures have failed: Fans 1/2 Fans 3/4 |
Fan failure | Error | The device trap message is output as is. |
Fan failure (warning) | Warning | The device trap message is output as is. Display example is as follows: Fans 1/2 are bad or missing; Replace quickly |
Fan recovery | Information | The device trap message is output as is. Display example is as follows: Backplane_Fan_5 spinning at or above normal speed |
Shutdown because of a power supply failure | Error | The device trap message is output as is. |
Power supply failure | Error | The device trap message is output as is. Display example is as follows: Power supply is in degraded mode: Power Supply #1 is off |
Power supply failure (warning) | Warning | The device trap message is output as is. Display example is as follows: Power supply 2 is powered off |
Power supply recovery | Information | The device trap message is output as is. Display example is as follows: Power supply 1 is powered on |
CPU usage rate warning | Warning | The device trap message is output as is. |
CPU usage rate recovery | Information | The device trap message is output as is. |
NVRAM battery completely discharged | Error | The device trap message is output as is. |
NVRAM battery power low | Warning | The device trap message is output as is. |
Cluster node error | Error | The device trap message is output as is. Display example is as follows: Cluster monitor: takeover started |
Cluster node takeover | Information | The device trap message is output as is. Display example is as follows: Cluster monitor: takeover completed |
Cluster recovery notification | Information | The device trap message is output as is. Display example is as follows: Cluster monitor: giveback completed |
Volume usage rate warning (98%) | Warning | The device trap message is output as is. Display example is as follows: /vol/vol1 is full (using or reserving 98% of space and 0% of inodes). |
Volume usage rate warning (95%) | Warning | The device trap message is output as is. Display example is as follows: /vol/vol1 is nearly full (using or reserving 95% of space and 0% of inodes). |
Volume usage rate recovery | Information | The device trap message is output as is. Display example is as follows: No volumes are full or nearly full. |
Shutdown because of a system temperature error | Error | The device trap message is output as is. |
System temperature warning | Warning | The device trap message is output as is. |
System temperature recovery | Information | The device trap message is output as is. |
Shelf failure | Error | The device trap message is output as is. Display example is as follows: Fault reported on disk storage shelf attached to slot 8. Please check fans, power and temperature. |
Shelf recovery | Information | The device trap message is output as is. Display example is as follows: Fault previously reported on disk storage shelf attached to channel 7 has been corrected. |
Shutdown because the global status is NonRecoverable | Error | The device trap message is output as is. |
global Status Critical | Error | The device trap message is output as is. Display example is as follows: Disk shelf fault. |
global Status NonCritical | Warning | The device trap message is output as is. Display example is as follows: Disk on adapter 8, shelf 1, bay 1, failed. |
Global status normal | Information | The device trap message is output as is. Display example is as follows: The system's global status is normal. |
"soft Quota" threshold exceeded | Warning | The device trap message is output as is. Display example is as follows: Threshold exceeded for user 1008, tree 0 on volume vol1 |
"soft Quota" normal | Information | The device trap message is output as is. Display example is as follows: Soft block limit returned to normal for user 1008, tree 0 on volume vol1 |
autosupport transfer error | Warning | The device trap message is output as is. Display example is as follows: Autosupport mail was not sent because the system cannot reach any of the mail hosts from the autosupport.mailhost option |
autosupport configuration definition error | Warning | The device trap message is output as is. Display example is as follows: Autosupport cannot connect to host lavender (Unknown mhost) |
autosupport transmission | Information | The device trap message is output as is. Display example is as follows: System Notification mail sent |
UPS power being supplied | Warning | The device trap message is output as is. Display example is as follows: Input power to UPS at 192.168.1.10 has failed. |
There is a state of emergency because the UPS power has almost reached a state of discharge | Warning | The device trap message is output as is. |
Shutdown due to a fully discharged UPS | Error | The device trap message is output as is. Display example is as follows: The time left on battery is marginal for UPS at 192.168.1.10. |
Low UPS power warning | Warning | The device trap message is output as is. |
UPS power recovery | Information | The device trap message is output as is. Display example is as follows: Input power to UPS at 192.168.1.10 has been restored. |
AppEmergency trap | Error | The device trap message is output as is. |
AppAlert trap | Error | The device trap message is output as is. |
AppCritical trap | Error | The device trap message is output as is. |
AppError trap | Error | The device trap message is output as is. |
AppWarning trap | Warning | The device trap message is output as is. |
AppNotice trap | Information | The device trap message is output as is. |
AppInfo trap | Information | The device trap message is output as is. |
AppTrap trap | Information | The device trap message is output as is. |
Audit log wrap enabled | Information | The device trap message is output as is. |
Saving to audit log | Information | The device trap message is output as is. |
Audit log nearly full | Information | The device trap message is output as is. |
Quota limit exceeded | Warning | The device trap message is output as is. Display example is as follows: Quota Event: status=exceeded, type=threshold, volume=vol1, limit_item=disk, limit_value=1024, user=65534, treeid=0 |
Recovery from the "quota limit exceeded" status | Information | The device trap message is output as is. Display example is as follows: Quota Event: status=normal, type=soft, volume=vol1, limit_item=disk limit_value=2048, user=65534, treeid=0 |
Directory size limit reached | Error | The device trap message is output as is. |
ECC correctable error | Error | The device trap message is output as is. |
Multiple ECC correctable errors | Warning | The device trap message is output as is. |
FTP daemon error | Warning | The device trap message is output as is. |
Maximum number of connections reached | Information | The device trap message is output as is. |
Maximum number of connections nearly reached | Information | The device trap message is output as is. |
FCP linkDown | Error | The device trap message is output as is. |
FCP partner path definition error | Error | The device trap message is output as is. |
Slot-limit-related event | Information | The device trap message is output as is. |
Primary interface failure | Warning | The device trap message is output as is. Display example is as follows: vif1 has failed over to the Backup interface e7a received trap from [192.168.1.10]. |
Failure of all interfaces | Error | The device trap message is output as is. Display example is as follows: All links for vif1 have failed |
vfiler stop | Information | The device trap message is output as is. |
vfiler start | Information | The device trap message is output as is. |
Virus detected | Error | The device trap message is output as is. |
vscan server disconnected | Warning | The device trap message is output as is. |
vscan setting changed | Information | The device trap message is output as is. |
vscan server connection | Information | The device trap message is output as is. |
vsan server upgraded | Information | The device trap message is output as is. |
Media error occurrence during reconstruction (wafliron failure) | Error | The device trap message is output as is. |
No matching volume | Error | The device trap message is output as is. |
Volume status changed (offline or restricted) | Information | The device trap message is output as is. |
Volume online | Information | The device trap message is output as is. |
RMC card replacement required | Error | The device trap message is output as is. |
RMC card cable connection error | Error | The device trap message is output as is. |
Remote volume connection failed | Warning | The device trap message is output as is. |
Remote volume connection restored | Information | The device trap message is output as is. |
Remote volume recovery complete | Information | The device trap message is output as is. |
Remote volume recovery started | Information | The device trap message is output as is. |
Root volume conflict | Error | The device trap message is output as is. |
Physical volume size limit exceeded | Error | The device trap message is output as is. |
Volume offline | Information | The device trap message is output as is. |
Volume made restricted | Information | The device trap message is output as is. |
wafl_check execution required because of degraded volume and dirty parity | Error | The device trap message is output as is. |
Volume error resulting in inability to place the volume online | Warning | The device trap message is output as is. |
Synchronous SnapMirror error (transition to asynchronous mode) | Warning | The device trap message is output as is. |
Return to synchronous SnapMirror mode | Information | The device trap message is output as is. |
Shutdown due to abnormal controller temperature | Error | The device trap message is output as is. |
Abnormal controller temperature | Error | The device trap message is output as is. |
Unknown controller temperature | Warning | The device trap message is output as is. |
Normal controller temperature | Information | The device trap message is output as is. |
Controller CPU fan stopped | Error | The device trap message is output as is. |
Controller CPU fan operating at a low speed | Warning | The device trap message is output as is. |
Controller CPU fan normal | Information | The device trap message is output as is. |
Multiple redundant controller power supplies failed | Error | The device trap message is output as is. |
Redundant controller power supply degraded | Error | The device trap message is output as is. |
Redundant controller power supply failed | Error | The device trap message is output as is. |
Redundant controller power supply removed | Warning | The device trap message is output as is. |
Redundant controller power supply turned off | Warning | The device trap message is output as is. |
All redundant controller power supply functions normal | Information | The device trap message is output as is. |
Redundant controller power supplies normal | Information | The device trap message is output as is. |
Redundant controller fan degraded | Error | The device trap message is output as is. |
Redundant controller fan removed | Warning | The device trap message is output as is. |
Redundant controller fan stopped | Warning | The device trap message is output as is. |
Redundant controller fan warning | Warning | The device trap message is output as is. |
Redundant controller fan normal | Information | The device trap message is output as is. |
Failure in write-verification of a snapvalidator-enabled volume | Error | The device trap message is output as is. |
Domain controller disconnected | Warning | The device trap message is output as is. |
Password replacement with the domain controller failed | Warning | The device trap message is output as is. |
One plex failed | Warning | The device trap message is output as is. |
One plex placed offline | Warning | The device trap message is output as is. |
Device fault in the shelf | Error | The device trap message is output as is. |
Device in the shelf repaired | Information | The device trap message is output as is. |
Module fault in the shelf | Error | The device trap message is output as is. |
Module fault in the shelf repaired | Information | The device trap message is output as is. |
The directory size has reached the maximum value | Error | The device trap message is output as is. |
The directory size is approaching the maximum value | Warning | The device trap message is output as is. |
All control blocks for CIFS statistics are being used | Warning | The device trap message is output as is. |
The power unit has been disengaged, therefore shutdown will occur if this is left as it is | Warning | The device trap message is output as is. |
There is a discrepancy between power unit types | Error | The device trap message is output as is. |
More than one package FAN is faulty, therefore shutdown will occur if this is left as it is | Error | The device trap message is output as is. |
A power unit in the system has connected to an incompatible external power source | Error | The device trap message is output as is. |
At least one volume usage rate recovery | Information | The device trap message is output as is. |
Directory size limit nearly reached | Warning | The device trap message is output as is. |
Domain controller connected | Information | The device trap message is output as is. |
Module warning in the shelf | Warning | The device trap message is output as is. |
Multiple power supply fan failure | Error | The device trap message is output as is. |
System down detection by system remote management | Error | The device trap message is output as is. |
System down detection by system remote management | Warning | The device trap message is output as is. |
System down instruction by system remote management | Warning | The device trap message is output as is. |
Periodic trap from system remote management | Information | The device trap message is output as is. |
Test trap from system remote management | Information | The device trap message is output as is. |
Multipath disk connected to one switch | Warning | The device trap message is output as is. |
Multipath disk not detected for the partner | Warning | The device trap message is output as is. |
Multipath disk not multipathed | Warning | The device trap message is output as is. |
Disk disable | Error | The device trap message is output as is. |
HBA offline | Warning | The device trap message is output as is. |
LUN Snap restore notice | Information | The device trap message is output as is. |
LUN clone created | Information | The device trap message is output as is. |
LUN Clone Split started | Information | The device trap message is output as is. |
LUN Clone Split completed | Information | The device trap message is output as is. |
Flex Clone Split started | Information | The device trap message is output as is. |
Flex Clone Split completed | Information | The device trap message is output as is. |
Created a Volume Clone | Information | The device trap message is output as is. |
Snapshot Autodeleted | Information | The device trap message is output as is. |
Volume is Autogrown | Information | The device trap message is output as is. |
All connections to domain controllers in the preferred domain controllers list have been lost | Error | The device trap message is output as is. |
External cache card failure | Information | The device trap message is output as is. |
External cache is taken offline | Information | The device trap message is output as is. |
The remaining number of Snapshot copies for a backup schedule is below warning limit specified | Warning | The device trap message is output as is. |
NTP Time Daemon lost contact with the configured target | Error | The device trap message is output as is. |
Trend Micro antivirus license has expired | Warning | The device trap message is output as is. |
Trend Micro antivirus license is about to expire | Information | The device trap message is output as is. |
Cutover phase of volume move job has been deferred | Warning | The device trap message is output as is. |
Cutover phase of volume move job attempt resulted in failure | Error | The device trap message is output as is. |
A volume move job completed successfully | Information | The device trap message is output as is. |
A volume move is waiting for the user to trigger cutover | Information | The device trap message is output as is. |
The anti-virus software update failed. | Error | The device trap message is output as is. |
The anti-virus software license validation failed. | Error | The device trap message is output as is. |
McAfee product has expired. | Error | The device trap message is output as is. |
Remedy action taken. The file has been repaired, deleted or quarantined. | Information | The device trap message is output as is. |
License validation was successful. | Information | The device trap message is output as is. |
Remedy action failed. The file was not repaired, deleted or quarantined. | Error | The device trap message is output as is. |
McAfee engine has expired. | Error | The device trap message is output as is. |
McAfee product is expiring. | Warning | The device trap message is output as is. |
A file larger than 2GB is not scanned and marked as clean. | Warning | The device trap message is output as is. |
McAfee engine is expiring. | Warning | The device trap message is output as is. |
Virus found while scanning. | Warning | The device trap message is output as is. |
McAfee anti-virus license activation failed. | Error | The device trap message is output as is. |
The anti-virus service disabling failed in the clustered system. | Error | The device trap message is output as is. |
The anti-virus service is disabled in the clustered system. | Information | The device trap message is output as is. |
McAfee anti-virus license is about to expire. | Warning | The device trap message is output as is. |
The anti-virus service is enabled in the clustered system. | Information | The device trap message is output as is. |
Spyware found while scanning. | Warning | The device trap message is output as is. |
The anti-virus service enabling failed in the clustered system. | Error | The device trap message is output as is. |
The anti-virus software cannot be rolled back. | Error | The device trap message is output as is. |
The anti-virus software is rolled back. | Information | The device trap message is output as is. |
The anti-virus software is updated. | Information | The device trap message is output as is. |
