ETERNUS SF Storage Cruiser V15.3 Operation Guide

6.1.5 Connectivity Management

With this product, it is possible to manage the storage device's connectivity. It is possible to operate with the same operability without being aware of restrictions according to type of storage device and model.

The target device is selected with the Web Console, and processing is selected from the action pane.

The executable operations are as follows:

• Display Connectivity Status (Set Up Host, Set Up Port, Host Response, Reset Group)

• Create/Delete Host Affinity

• Set Up FC Host/iSCSI Host/SAS Host

• Set Up FC Port/iSCSI Port/SAS Port

• Set Up Affinity Group

• Set Up Host Response

• LUN Mapping (direct connection) display

Note

• The iSCSI-RA port Transfer Rate cannot be changed in the Web Console.
  If it needs to be changed, use the ETERNUS Web GUI.

• Setting the IP address, link local IP address, connection IP address, iSCSI name, or iSCSI alias name of an iSCSI port the same as another iSCSI port may not be allowed.
  Refer to the following table for information on the duplicate registration:

  Storage model name	Duplicate registration
  	IP address	Link local IP address	Connection IP address	iSCSI name (*1)	iSCSI alias name
  ETERNUS DX80 S2/DX90 S2 ETERNUS DX400 S2 series ETERNUS DX8000 S2 series	N/A	N/A	N/A	N/A	N/A
  ETERNUS DX60/DX60 S2/DX80/DX90 ETERNUS DX400 series ETERNUS DX8000 series ETERNUS4000 models 400 and 600 ETERNUS8000 models 800, 1200 and 2200	N/A	-	-	N/A	N/A
  ETERNUS2000 models 50, 100 and 200 ETERNUS4000 models 300 and 500 ETERNUS8000 models 700, 900, 1100 and 2100	N/A	-	-	N/A	A

  "A" indicates "Available", and "N/A" indicates "Not Available".

  *1: If the default iSCSI name has been set, it is able to be registered by duplicating.

• Setting the IP address, iSCSI name, iSCSI alias name, and iSCSI host name of an iSCSI host the same as another iSCSI host may not be allowed.
  Refer to the following table for information on the duplicate registration:

  Storage model name	Duplicate registration
  	IP address	iSCSI name	iSCSI alias name	iSCSI host name
  ETERNUS DX80 S2/DX90 S2 ETERNUS DX400 S2 series ETERNUS DX8000 S2 series	A (*1)	A (*1)	N/A	N/A
  ETERNUS DX60/DX60 S2/DX80/DX90 ETERNUS DX400 series ETERNUS DX8000 series ETERNUS4000 models 400 and 600 ETERNUS8000 models 800, 1200 and 2200	N/A	A	N/A	N/A
  ETERNUS2000 models 50, 100 and 200 ETERNUS4000 models 300 and 500 ETERNUS8000 models 700, 900, 1100 and 2100	N/A	N/A	A	-

  "A" indicates "Available", and "N/A" indicates "Not Available".

  *1: If both the IP address and the iSCSI name are duplicated, it is not available. If one either is not duplicated, it is available.