mpnet instance activation.
Creation of LAN redundancy using the Multipath function is not available. (*2)
/system/filesystem/local
None.
/opt/FJSVmpnet/daemon/mpnetd or /opt/FJSVmpnet/daemon/mpnetpolld (*4)
None.
(*1) This SMF service exists only in Solaris 10.
(*2) For using the Multipath function, it is necessary to enable the following services in addition to this service:
/network/fjsvmpnet-inet
/network/fjsvmpnet-inet6
/network/fjsvmpnet-stop
(*3) If disabled, the service cannot start.
(*4) One line monitoring daemon is started for each mpnet instance.
IPV4 interface activation.
Creation of LAN redundancy using the Multipath function is not available.
/network/fjsvmpnet
None.
None.
None.
(*1) This SMF service exists only in Solaris 10.
IPV6 interface activation.
Creation of LAN redundancy using the Multipath function is not available.
/network/fjsvmpnet-inet
/system/sysidtool:net
/network/initial
None.
None.
(*1) This SMF service exists only in Solaris 10.
Stopping of daemons for Multipath function when system is stopped.
Daemons for Multipath function will not be stopped when system is stopped.
None.
None.
None.
None.
(*1) This SMF service exists only in Solaris 10.
Startup of daemons and activation of virtual interfaces.
Creation of LAN redundancy using the Redundant Line Control function is not available. (*1)
/milestone/network
/system/filesystem/local (*3)
/network/initial
/network/routing-setup
/network/fjsvhanet-poll
/opt/FJSVhanet/etc/sbin/hanetctld
/opt/FJSVhanet/etc/sbin/hanetptld (*4)
Port | Protocol | Send/ | Network | Target | Communication target | |
|---|---|---|---|---|---|---|
Port | Target | |||||
1807 | UDP | s, r | Public LAN | Cluster node | 1807 | Remote node |
(*1) For using the Redundant Line Control function, it is necessary to enable the following service in addition to this service:
/network/fjsvhanet-poll
(*2) If disabled, the service cannot start.
(*3) When the emergency correction T009351SP-01 or later is not applied.
(*4) Exists only when using the standby patrol function in exclusive-IP zones. Availability of startup and the number of processes rely on the configuration. Also, this may be suspended according to the monitoring status.
(*5) Port only used by GS/SURE linkage modes.
Startup of line monitoring.
Creation of LAN redundancy using the Redundant Line Control function is not available.
/network/fjsvhanet (*1)
/network/service
/network/routing-setup
/system/zones
None.
/opt/FJSVhanet/etc/sbin/hanetmond (*2)
/opt/FJSVhanet/etc/sbin/hanetselect (*3)
None.
(*1) If disabled, the service cannot start.
(*2) Starts only when the self-checking function is used.
(*3) Availability of startup and the number of processes rely on the configuration. Also, this may be suspended according to the monitoring status.
Basic part of GDS.
GDS functions cannot be used.
/milestone/devices
/milestone/network
/milestone/single-user
/usr/sbin/sdxservd
/usr/sbin/sdxlogd
/usr/sbin/sdxexd
None.
None.
Beginning of online tracing of the Cluster Resource Management facility (1).
The cluster cannot be started.
/milestone/multi-user
None.
None.
None.
None.
Beginning of online tracing of the Cluster Resource Management facility (2).
The cluster cannot be started.
/milestone/multi-user
None.
None.
None.
None.
Startup of cluster configuration management facility.
The cluster cannot be started.
/milestone/multi-user
/milestone/fjsvclapi
/milestone/fjsvclrms
/milestone/smawcf
None.
/etc/opt/FJSVcluster/FJSVcldbm/daemons/dcmmond
/etc/opt/FJSVcluster/FJSVcldbm/daemons/dcmmstd
/etc/opt/FJSVcluster/FJSVcldbm/daemons/dcmevmd
/etc/opt/FJSVcluster/FJSVcldbm/daemons/dcmfcpd
/etc/opt/FJSVcluster/FJSVcldbm/daemons/dcmsynd
/etc/opt/FJSVcluster/FJSVcldbm/daemons/dcmprcd
/etc/opt/FJSVcluster/FJSVcldbm/daemons/dcmcfmd
/etc/opt/FJSVcluster/FJSVcldbm/daemons/dcmdbud
/etc/opt/FJSVcluster/FJSVcldbm/daemons/dcmcomd
/etc/opt/FJSVcluster/FJSVcldbm/daemons/dcmdbcd
/etc/opt/FJSVcluster/FJSVcldbm/daemons/dcmlckd
/etc/opt/FJSVcluster/FJSVclrms/daemons/clwatchlogd
Port | Protocol | Send/ | Network | Target | Communication target | |
|---|---|---|---|---|---|---|
Port | Target | |||||
9331 | TCP | s, r | Interconnect | Cluster node | ANY | Local and remote cluster nodes |
9379 | TCP | s, r | Interconnect | Cluster node | ANY | Local and remote cluster nodes |
9378 | TCP | s, r | Interconnect | Cluster node | ANY | Local and remote cluster nodes |
9377 | TCP | s, r | Interconnect | Cluster node | ANY | Local and remote cluster nodes |
9376 | TCP | s, r | Interconnect | Cluster node | ANY | Local cluster node |
9375 | TCP | s, r | Interconnect | Cluster node | ANY | Local cluster node |
(*1) No.9331 is set to support the service name "dcmcom."
(*2) No.9379 is set to support the service name "dcmsync."
(*3) No.9378 is set to support the service name "dcmlck."
(*4) No.9377 is set to support the service name "dcmfcp."
(*5) No.9376 is set to support the service name "dcmevm."
(*6) No.9375 is set to support the service name "dcmmst."
When using the IP filtering function of Oracle Solaris, allow communications between all nodes.
Startup of Cluster Resource Management facility (1).
The cluster cannot be started.
/milestone/multi-user
/milestone/fjsvcldbm
None.
/etc/opt/FJSVcluster/FJSVcldbm/daemons/clrmd
None.
None.
Waiting for completion of startup of the Cluster Resource Management facility; basic part of GDS.
Clusters and functions of GDS cannot be used.
/milestone/multi-user
/milestone/fjsvclrmgr
None.
/usr/sbin/sdxcld
/usr/sbin/sdxclc
/usr/sbin/sdxcle
None.
None.
Setting of cluster applications.
Cluster applications cannot be configured correctly, or will not work correctly.
/milestone/multi-user
/milestone/fjsvclctrl
/milestone/smawrrms
None.
None.
None.
Startup of process monitoring facility.
Applications using the process monitoring functions will not work.
/milestone/multi-user
/milestone/fjsvclctrl
/milestone/smawrrms
/etc/opt/FJSVcluster/FJSVclapm/daemons/prmd
None.
None.
Startup of Cluster Resource Management facility (2).
The cluster cannot be started.
/milestone/multi-user
/milestone/fjsvclctrl
/milestone/smawrrms
None.
None.
None.
Startup of daemons on Web-Based Admin View management server or monitoring nodes.
Settings and monitoring via the GUI provided by Web-Based Admin View will not be available.
/milestone/multi-user
/network/initial
None.
[For the node working as the primary or the secondary management server]
/opt/SMAW/SMAWcj2re/jre/bin/java
wvAgent /opt/FJSVwvbs (2 processes)
/etc/opt/FJSVwvfrm/sbin/wvClEventd (0-2 processes)
/etc/opt/FJSVwvfrm/sbin/wvFaultEventd (0-2 processes)
[For nodes other than those described above]
wvAgent /opt/FJSVwvbs (2 processes)
/etc/opt/FJSVwvfrm/sbin/wvClEventd (0-2 processes)
/etc/opt/FJSVwvfrm/sbin/wvFaultEventd (0-2 processes)
Port | Protocol | Send/ | Network | Target | Communication target | |
|---|---|---|---|---|---|---|
Port | Target | |||||
9399 | TCP | s, r | Administrative LAN | Administrative server (*5) | ANY | WebView client (*6) |
9398 | TCP | s, r | Administrative LAN | Administrative server (*5) | ANY | WebView client (*6) |
9397 | TCP | s, r | Administrative LAN | Administrative server (*5) | ANY | Local and remote cluster nodes |
9396 | UDP | s, r | Administrative LAN | Administrative server (*5) | ANY | Local and remote cluster nodes |
When using the IP filtering function of Oracle Solaris, allow communications between all nodes.
(*1) No.9399 is set to support the service name "fjwv_c."
(*2) No.9398 is set to support the service name "fjwv_s."
(*3) No.9397 is set to support the service name "fjwv_n."
(*4) No.9396 is set to support the service name "fjwv_g."
(*5) Including concurrent use with cluster nodes.
(*6) PC or Solaris workstation.
Beginning of shared disk connection confirmation.
Connections of shared disks cannot be checked.
/milestone/multi-user
/milestone/fjsvclctrl
None.
None.
None.
None.
Waiting for shared disk connection confirmation.
Connections of shared disks cannot be checked.
/milestone/multi-user
/milestone/fjsvclautoconfig
/milestone/smawrrms
None.
None.
None.
WWW server for sending Java applets, Java classes, and HTML contents to clients.
Settings and monitoring via the GUI provided by Web-Based Admin View will not be available.
/milestone/multi-user
/milestone/fjsvwvbs
None.
/opt/FJSVwvcnf/bin/wvcnfd
Port | Protocol | Send/ | Network | Target | Communication target | |
|---|---|---|---|---|---|---|
Port | Target | |||||
8081 | TCP | s, r | Administrative LAN | Administrative server (*2) | ANY | WebView client (*3) |
(*1) No.8081 is set to support the service name "fjwv-h."
(*2) Including concurrent use with cluster nodes.
(*3) PC or Solaris workstation.
Note: For wvcnfd, there is an additional child process of the same name while processing a request from a client.
This process, however, terminates immediately after processing the request.
Initialization processing for monitoring facility of GFS shared file system.
Functions of GFS shared file system cannot be used.
/system/filesystem/minimal
/milestone/single-user
None.
None.
None.
Startup control for monitoring facility of GFS shared file system, mount control for GFS shared file system.
Functions of GFS shared file system cannot be used.
/milestone/multi-user
/milestone/smawcf
/milestone/fjsvclctrl
/milestone/fjsvgfsinit
/milestone/fjsvclrmgr2
/milestone/smawrrms
/usr/lib/fs/sfcfs/sfcpncd
/usr/lib/fs/sfcfs/sfcprmd
/usr/lib/fs/sfcfs/sfchnsd
/usr/lib/fs/sfcfs/sfcfrmd
/usr/lib/fs/sfcfs/sfcfsd
/usr/lib/fs/sfcfs/sfcfsmg
Port | Protocol | Send/ | Network | Target | Communication target | |
|---|---|---|---|---|---|---|
Port | Target | |||||
9200 (*1) | TCP | s, r | Interconnect | Cluster node | ANY | Remote cluster node |
9100-9163 (*2) | TCP | s, r | Interconnect and | Cluster node | ANY | Local and remote cluster nodes |
When using the IP filtering function of Oracle Solaris, allow communications between all nodes.
(*1) No. 9200 is set to support the service name "sfcfsrm."
(*2) From No. 9100 to No. 9163 are set to support the service names from sfcfs-1 to sfcfs-64.
Size check of internal log files of GFS shared file system, and switching of logs as necessary.
Functions of GFS shared file system cannot be used.
/milestone/multi-user-server
/milestone/fjsvgfsfsrm
None.
None.
None.
None.
Initialization processing of RMS.
RMS functions cannot be used.
/milestone/multi-user
None.
None.
None.
None.
Startup of RMS.
Even if HV_RCSTART=1 is set, RMS will not start automatically at node startup.
/milestone/smawcf
/milestone/multi-user-server
None.
/opt/SMAW/SMAWRrms/bin/bm
Port | Protocol | Send/ | Network | Target | Communication target | |
|---|---|---|---|---|---|---|
Port | Target | |||||
9786 | TCP | s, r | Interconnect | Cluster node | 9786 | Remote cluster node |
8000 | UDP | s, r | Interconnect | Cluster node | 8000 | Remote cluster node |
11111 | UDP | s, r | Interconnect | Cluster node | 11111 | Remote cluster node |
(*1) No.9786 is set to support the service name "rmshb."
Port numbers 8000 and 11111 are used as fixed values by the program.
In order to avoid duplicate use of the same port number by other applications, modify the port number in the other applications.
Startup of asynchronous monitoring.
As the asynchronous monitoring cannot function, detection of any nodes being down will be delayed.
Also, when a node is hanging, the LEFTCLUSTER status cannot be resolved without intervention by an operator. (*1)
/milestone/smawcf
None.
/etc/opt/FJSVcluster/sys/devscfd (*2)
/etc/opt/FJSVcluster/sys/devscfmond (*2)
/etc/opt/FJSVcluster/sys/devrccud (*2)
/etc/opt/FJSVcluster/sys/devrccuxd (*2)
/etc/opt/FJSVcluster/sys/devrcircculogd (*2)
/etc/opt/FJSVcluster/sys/devsnmpd (*3)
Port | Protocol | Send/ | Network | Target | Communication target | |
|---|---|---|---|---|---|---|
Port | Target | |||||
22 (*4) | TCP | s, r | Administrative LAN | Cluster node | 22 (*4) | XSCF and |
23 (*4) | TCP | s, r | Administrative LAN | Cluster node | 23 (*4) | XSCF |
8010 | TCP | s, r | Administrative LAN | Cluster node | 8010 | XSCF |
8011 | TCP | s, r | Administrative LAN | Cluster node | 8011 | XSCF |
162 | UDP | r | Administrative LAN | Cluster node | 162 | XSCF |
(*1) If you are using the asynchronous monitoring in order to automatically stop a node on which an error occurred, it is necessary to enable the following service in addition to this service:
/milestone/smawsf
(*2) Not available on SPARC M10
(*3) Available only on SPARC M10
(*4) ssh port number 22 and telnet port number 23 in cluster nodes and communication targets cannot be modified.
Startup of Shutdown Facility.
Nodes on which an error occurs cannot be stopped automatically.
/milestone/fjsvcldev
/milestone/smawrrms
/opt/SMAW/SMAWsf/bin/rcsd
Port | Protocol | Send/ | Network | Target | Communication target | |
|---|---|---|---|---|---|---|
Port | Target | |||||
2316 | UDP | s, r | Administrative LAN | Cluster node | 2316 | Remote cluster node |
23 (*2) | TCP | s, r | Administrative LAN | Cluster node | 23 (*2) | ALOM |
(*1) No. 2316 is set to support the service name "sfadv."
(*2) The telnet port number 23 in cluster nodes and communication targets cannot be modified.
Loading of CF and CIP drivers.
The cluster cannot be started.
/milestone/multi-user
None.
/opt/SMAW/SMAWcf/bin/cfregd
/opt/SMAW/SMAWcf/bin/genqm
None.
None.
Startup of daemons and activation of virtual interfaces.
Creation of the LAN redundancy using the Redundant Line Control Function for Virtual NIC Mode is not available.
/network/install
/network/physical
/opt/FJSVrvnet/bin/rvnetmd
/opt/FJSVrvnet/bin/rvnetpathmd (*3)
None.
(*1) This SMF service exists only in Solaris 11.
(*2) If disabled, the service cannot start.
(*3) Whether this daemon starts or not, and the number of processes depend on the configuration of the virtual NIC mode. Also, this daemon may be suspended according to the monitoring status.
