Top
PRIMECLUSTER  Installation and Administration Guide4.3

A.10.1 Cluster Configuration Worksheet

Shown below is an example of creating the Cluster Configuration Worksheet.

In each node, specify /etc/inet/ntp.conf as shown below.

server 10.34.214.100
server 10.34.214.101
server 127.127.1.0
fudge 127.127.1.0 stratum 9

enable auth monitor

disable pll
driftfile /etc/ntp/ntp.drift
statsdir /var/ntp/ntpstats/
filegen peerstats file peerstats type day enable
filegen loopstats file loopstats type day enable
filegen clockstats file clockstats type day enable

For detailed instructions on specifying /etc/inet/ntp/conf, see the online manual by executing the "xntpd(1M)" command.