If you use GS linkage mode, be sure to set up the remote host monitoring function. For information on how to do this, see "7.13 hanetobserv Command".
If you use GS linkage mode, be sure to set up the virtual gateway. For information on how to do this, see "7.12 hanetgw Command".
GS linkage mode is not available for communications between a Linux server and a Solaris server.
Do not set the same virtual IP address on GS for the communication target, if you set multiple GLS's takeover virtual IP addresses within the same cluster. You can do this between different clusters.
Set a different network address from the virtual IP address of the communication target GS for a virtual IP address in GS linkage mode.
Set the virtual IP addresses used in GS linkage mode to have different network addresses.
When communicating between GLS and GS via router, make sure that the router neighboring GLS is RIPv1 and the path to GS's virtual IP address is broadcast.
In GS linkage mode, set the same netmask for the virtual IP addresses of GS and GLS, and physical IP addresses.
In GS linkage mode, the tagged VLAN function is not available..
