Confirm whether the port number used in Systemwalker Desktop Patrol is problematic or usable or not at the design stage.
Refer to "Port Number and Service" in the Systemwalker Desktop Patrol Reference Manual to confirm the port number used in Systemwalker Desktop Patrol.
Modify the port number if the port number used in Systemwalker Desktop Patrol has been used in the system.
The port number between CS and AC, and between CS and SS, is 10104 during operation.
Therefore, if other applications use the port number 10104, corresponding applications have to be closed, or the port number for Systemwalker standard database has to be modified before constructing the environment in the Operation Environment Maintenance Guide window to prevent repeated use of port number.
The same port number shall be set in CS and AC, and between CS and SS. If the port number in AC and SS is modified, ensure the port number in CS has been modified.
For the method to modify the port number of CS, AC, and SS, refer to "Modify Method of Applied Port Number" in the Systemwalker Desktop Patrol Reference Manual.
If the environment has been constructed in the CS, "Expand Applied Environment" through the "Operation Environment Maintenance Guide" after changing the port number. It is not necessary to make special modifications in the setting value in the Expand Applied Environment window.
When starting up the Managed Ledger Setting window after changing the port number in AC, the "Connection Fails" message will be displayed. Confirm the Connected Target Server Name and click the OK button.
In the SS, change the port number, and restart the Systemwalker Desktop Patrol SS services.
