Systemwalker Desktop Keeper User's Guide for Administrator

7.8 Change Management Console Environment

This section describes how to change the IP address or server name of the (Master) Management Server to be connected that is set during the installation of the Management Console.
The method described here is the procedure when the IP address or server name of connection target server of the Management Console is modified if the Management Console has already been installed.

Before the procedure is started, it is required to complete the change of environment of the Management Server and the Management Console according to "7.9.4 Change System Environment with the Change of IP Address/Computer Name of Management Server/Master Management Server".
In addition, in the case of specifying the server name when changing the (Master) Management Server to be connected, confirm that the name has been analyzed first.

The procedure is as follows.

1. Logon to the PC with a user that belongs to the Administrators group of local computer or a user that belongs to the Domain Admins group.

2. Insert the setup disk. When the installer is not started, start "swsetup.exe" of the drive with setup disk inserted.

3. Select Management Console Installation.

   The Welcome window is displayed.

4. Select Modify and click the Next button.
   The Enter the server information window is displayed.

5. Change the server name or IP address.

   When Adding New Server Name or IP Address

   1. Set Sever name or IP address of connected (Master) Management Server.

   2. Set the Port number being used.

   3. Click the Add button.

   When Deleting the Set Server Name or IP Address

   1. Select the "Sever name or IP address of connected (Master) Management Server: Port number being used" to be deleted.

   2. Click the Remove button.

   When Changing the Server Name or IP Address that has been Set

   1. Select the "Sever name or IP address of connected (Master) Management Server: Port number being used" to be modified.

   2. Click the Removebutton.

   3. Set the Sever name or IP address of connected (Master) Management Server.

   4. Set the Port number being used.

   5. Click the Add button.

6. Click the Next button.

7. Click the Install button.

8. Click the Finish button.

9. When requested to restart the PC after the installation has completed, restart.

   • During installation with overwriting when the Management Console has been started