Top
Systemwalker Operation Manager  Technical Guide
FUJITSU Software

B.1 Limit Values for Operations

This section explains the limit values for operations.

Number of servers that can be monitored by the Multi-server Monitoring function and by the Web Console

Up to 62 servers can be monitored using the Multi-server Monitoring function. If 63 or more servers are monitored, the 63rd and subsequent servers will be displayed as "Not running" or "Requesting" in the Multi-server Monitoring window. A single subsystem is counted as a single server.

Number of clients that can be connected to the Systemwalker Operation Manager server

Up to 62 clients can connect to the Systemwalker Operation Manager server (Note). The maximum number of connected clients can be limited to no more than 62 clients by using the Use function2 tab in the Define Jobscheduler Startup Parameters window. However, the number of clients cannot be limited if they are connecting to a Systemwalker OperationMGR server running V10.0L21 [Windows version] or V10.1 [UNIX version] or earlier.

Note) This limit may vary depending on the operating system.

The following systems are counted as "connected clients":

Number of message events that can be accumulated for job nets

Up to 255 message events can be accumulated for each job net.

If the message event count is decremented or cleared due to the job net starting, message events can be accumulated from the decremented or cleared level until the count reaches 255.