Top
Symfoware Server V12.1.0 Cluster Operation Guide
FUJITSU Software
Appendix A Creating Resources and Creating/Modifying Cluster Applications > A.1 Creating Resources and Cluster Applications > A.1.2 Creating a Cluster Application and Configuring Its Attributes
PreviousNext

A.1.2 Creating a Cluster Application and Configuring Its Attributes

  1. Select [Application-Create].

    pcl-vm13: Main configuration menu, current configuration: config
No RMS active in the cluster
 1) HELP                                10) Configuration-Remove
 2) QUIT                                11) Configuration-Freeze
 3) Application-Create                  12) Configuration-Thaw
 4) Application-Edit                    13) Configuration-Edit-Global-Settings
 5) Application-Remove                  14) Configuration-Consistency-Report
 6) Application-Clone                   15) Configuration-ScriptExecution
 7) Configuration-Generate              16) RMS-CreateMachine
 8) Configuration-Activate              17) RMS-RemoveMachine
 9) Configuration-Copy
Choose an action: 3

  2. Select [STANDBY].

    Creation: Application type selection menu:
1) HELP                                 7) SCALABLE
2) QUIT                                 8) STANDBY
3) RETURN
4) OPTIONS
5) DEMO
6) GENERIC
Application Type: 8

  3. Select [Machines+Basics].

    Specify any application name that is within the scope of the PRIMECLUSTER constraints.

    Settings of turnkey wizard "STANDBY" (APP1:not yet consistent)
1) HELP                                 4) REMOVE+EXIT
2) NO-SAVE+EXIT                         5) ApplicationName=APP1
3) SAVE+EXIT                            6) Machines+Basics(-)
Choose the setting to process: 6

  4. Select [AdditionalMachine].

    Machines+Basics (app1:consistent)
 1) HELP                                14) (AutoStartUp=no)
 2) -                                   15) (AutoSwitchOver=No)
 3) SAVE+EXIT                           16) (PreserveState=no)
 4) REMOVE+EXIT                         17) (PersistentFault=0)
 5) AdditionalMachine                   18) (ShutdownPriority=)
 6) AdditionalConsole                   19) (OnlinePriority=)
 7) Machines[0]=pcl-vm13RMS             20) (StandbyTransitions=)
 8) (PreCheckScript=)                   21) (LicenseToKill=no)
 9) (PreOnlineScript=)                  22) (AutoBreak=yes)
10) (PostOnlineScript=)                 23) (AutoBreakMaintMode=no)
11) (PreOfflineScript=)                 24) (HaltFlag=no)
12) (OfflineDoneScript=)                25) (PartialCluster=0)
13) (FaultScript=)                      26) (ScriptTimeout=)
Choose the setting to process: 5

  5. Select a standby node.

    1) HELP
2) RETURN
3) pcl-vm13RMS
4) pcl-vm14RMS
Choose a machine for this application: 4

  6. Ensure that all nodes that make up the cluster application are displayed in [Machines]. Note that the item displayed in Machines[0] needs to be the active node, and Machines[1] to be the standby node. If these are not set correctly, modify the setting.

    Machines+Basics (app1:consistent)
 1) HELP                                15) (AutoStartUp=no)
 2) -                                   16) (AutoSwitchOver=No)
 3) SAVE+EXIT                           17) (PreserveState=no)
 4) REMOVE+EXIT                         18) (PersistentFault=0)
 5) AdditionalMachine                   19) (ShutdownPriority=)
 6) AdditionalConsole                   20) (OnlinePriority=)
 7) Machines[0]=pcl-vm13RMS             21) (StandbyTransitions=)
 8) Machines[1]=pcl-vm14RMS             22) (LicenseToKill=no)
 9) (PreCheckScript=)                   23) (AutoBreak=yes)
10) (PreOnlineScript=)                  24) (AutoBreakMaintMode=no)
11) (PostOnlineScript=)                 25) (HaltFlag=no)
12) (PreOfflineScript=)                 26) (PartialCluster=0)
13) (OfflineDoneScript=)                27) (ScriptTimeout=)
14) (FaultScript=)
Choose the setting to process:

  7. Configure attributes for cluster applications from step 8.

    Refer to the PRIMECLUSTER Installation and Administration Guide for information on the attributes for cluster applications.

    Configure the attributes as shown below:

    Attribute

    Value

    AutoStartUp

    (Automatically starts cluster applications when the RMS is started.)

    Yes

    AutoSwitchOver

    (Automatically switches nodes when a fault occurs in cluster applications.)

    • HostFailure

    • ResourceFailure

    • ShutDown

    PersistentFault

    (Selects whether to keep the Faulted state of the cluster application after restarting the RMS.) (*1)

    0 or 1

    OnlinePriority

    (Selects whether to use the same online nodes as those used before all clusters were restarted or follow the configured order for nodes, when all clusters were restarted.) (*2)

    0 or 1

    StandbyTransitions

    (Timing to perform standby state transition.)

    • ClearFaultRequest

    • StartUp

    • SwitchRequest

    HaltFlag

    (Selects whether to terminate the node forcibly when another error occurs during the Fault process.)

    Yes

    *1: If 0 is specified, the Faulted state is automatically canceled when the RMS is started. If 1 is specified, the Faulted state is kept.

    *2 If 0 is specified and the placement differs from the initial configuration due to reasons, such as switching, cluster applications are restarted using the placement from the initial configuration. If 1 is specified, cluster applications are restarted using the placement from before the restart.

  8. Select [AutoStartUp].

    Machines+Basics (app1:consistent)
 1) HELP                                15) (AutoStartUp=no)
 2) -                                   16) (AutoSwitchOver=No)
 3) SAVE+EXIT                           17) (PreserveState=no)
 4) REMOVE+EXIT                         18) (PersistentFault=0)
 5) AdditionalMachine                   19) (ShutdownPriority=)
 6) AdditionalConsole                   20) (OnlinePriority=)
 7) Machines[0]=pcl-vm13RMS             21) (StandbyTransitions=)
 8) Machines[1]=pcl-vm14RMS             22) (LicenseToKill=no)
 9) (PreCheckScript=)                   23) (AutoBreak=yes)
10) (PreOnlineScript=)                  24) (AutoBreakMaintMode=no)
11) (PostOnlineScript=)                 25) (HaltFlag=no)
12) (PreOfflineScript=)                 26) (PartialCluster=0)
13) (OfflineDoneScript=)                27) (ScriptTimeout=)
14) (FaultScript=)
Choose the setting to process: 15

  9. Select [yes].

    1) HELP
2) RETURN
3) yes
4) no
Set the AutoStartUp mode: 3

  10. Select [AutoSwitchOver].

    Machines+Basics (app1:consistent)
 1) HELP                                15) (AutoStartUp=yes)
 2) -                                   16) (AutoSwitchOver=No)
 3) SAVE+EXIT                           17) (PreserveState=no)
 4) REMOVE+EXIT                         18) (PersistentFault=0)
 5) AdditionalMachine                   19) (ShutdownPriority=)
 6) AdditionalConsole                   20) (OnlinePriority=)
 7) Machines[0]=pcl-vm13RMS             21) (StandbyTransitions=)
 8) Machines[1]=pcl-vm14RMS             22) (LicenseToKill=no)
 9) (PreCheckScript=)                   23) (AutoBreak=yes)
10) (PreOnlineScript=)                  24) (AutoBreakMaintMode=no)
11) (PostOnlineScript=)                 25) (HaltFlag=no)
12) (PreOfflineScript=)                 26) (PartialCluster=0)
13) (OfflineDoneScript=)                27) (ScriptTimeout=)
14) (FaultScript=)
Choose the setting to process: 16

  11. Select [HOSTFAILURE], then [RESOURCEFAILURE], then [SHUTDOWN], and then select [SAVE+RETURN] when the following window is displayed:

    Set flags for AutoSwitchOver:  Currently set: HOSTFAILURE,RESOURCEFAILURE,SHUTDOWN (HRS)
1) HELP                   4) DEFAULT                7) NOT:RESOURCEFAILURE(R)
2) -                      5) NO(N)                  8) NOT:SHUTDOWN(S)
3) SAVE+RETURN            6) NOT:HOSTFAILURE(H)
Choose one of the flags: 3

  12. Select [PersistentFault].

    Machines+Basics (app1:consistent)
 1) HELP
 2) -
 3) SAVE+EXIT
 4) REMOVE+EXIT
 5) AdditionalMachine
 6) AdditionalConsole
 7) Machines[0]=pcl-vm13RMS
 8) Machines[1]=pcl-vm14RMS
 9) (PreCheckScript=)
10) (PreOnlineScript=)
11) (PostOnlineScript=)
12) (PreOfflineScript=)
13) (OfflineDoneScript=)
14) (FaultScript=)
15) (AutoStartUp=yes)
16) (AutoSwitchOver=HostFailure|ResourceFailure|ShutDown)
17) (PreserveState=no)
18) (PersistentFault=0)
19) (ShutdownPriority=)
20) (OnlinePriority=)
21) (StandbyTransitions=)
22) (LicenseToKill=no)
23) (AutoBreak=yes)
24) (AutoBreakMaintMode=no)
25) (HaltFlag=no)
26) (PartialCluster=0)
27) (ScriptTimeout=)
Choose the setting to process: 18

  13. Select [0] or [1] (the example below selects [1]).

    1) HELP
2) RETURN
3) 0
4) 1
Enable persistent fault feature for this application: 4

  14. Select [OnlinePriority].

    Machines+Basics (app1:consistent)
 1) HELP
 2) -
 3) SAVE+EXIT
 4) REMOVE+EXIT
 5) AdditionalMachine
 6) AdditionalConsole
 7) Machines[0]=pcl-vm13RMS
 8) Machines[1]=pcl-vm14RMS
 9) (PreCheckScript=)
10) (PreOnlineScript=)
11) (PostOnlineScript=)
12) (PreOfflineScript=)
13) (OfflineDoneScript=)
14) (FaultScript=)
15) (AutoStartUp=yes)
16) (AutoSwitchOver=HostFailure|ResourceFailure|ShutDown)
17) (PreserveState=no)
18) (PersistentFault=1)
19) (ShutdownPriority=)
20) (OnlinePriority=)
21) (StandbyTransitions=)
22) (LicenseToKill=no)
23) (AutoBreak=yes)
24) (AutoBreakMaintMode=no)
25) (HaltFlag=no)
26) (PartialCluster=0)
27) (ScriptTimeout=)
Choose the setting to process: 20

  15. Select [0] or [1] (the example below selects [1]).

    1) HELP
2) RETURN
3) 0
4) 1
Enable Online Priority (Active Standby) feature for this application: 4

  16. Select [StandbyTransitions].

    Machines+Basics (app1:consistent)
 1) HELP
 2) -
 3) SAVE+EXIT
 4) REMOVE+EXIT
 5) AdditionalMachine
 6) AdditionalConsole
 7) Machines[0]=pcl-vm13RMS
 8) Machines[1]=pcl-vm14RMS
 9) (PreCheckScript=)
10) (PreOnlineScript=)
11) (PostOnlineScript=)
12) (PreOfflineScript=)
13) (OfflineDoneScript=)
14) (FaultScript=)
15) (AutoStartUp=yes)
16) (AutoSwitchOver=HostFailure|ResourceFailure|ShutDown)
17) (PreserveState=no)
18) (PersistentFault=1)
19) (ShutdownPriority=)
20) (OnlinePriority=1)
21) (StandbyTransitions=)
22) (LicenseToKill=no)
23) (AutoBreak=yes)
24) (AutoBreakMaintMode=no)
25) (HaltFlag=no)
26) (PartialCluster=0)
27) (ScriptTimeout=)
Choose the setting to process: 21

  17. Select [CLEARFAULTREQUEST], then [STARTUP], then [SWITCHREQUEST], and then select [SAVE+RETURN] when the following window is displayed:

    Set flags for StandbyTransitions: Currently set: ClearFaultRequst,StartUp,SwitchRequest (CTW)
1) HELP                                 5) NOT:CLEARFAULTREQUEST(C)
2) -                                    6) NOT:STARTUP(T)
3) SAVE+RETURN                          7) NOT:SWITCHREQUEST(W)
4) NO(N)
Choose one of the flags: 3

  18. Select [HaltFlag].

    Machines+Basics (app1:consistent)
 1) HELP
 2) -
 3) SAVE+EXIT
 4) REMOVE+EXIT
 5) AdditionalMachine
 6) AdditionalConsole
 7) Machines[0]=pcl-vm13RMS
 8) Machines[1]=pcl-vm14RMS
 9) (PreCheckScript=)
10) (PreOnlineScript=)
11) (PostOnlineScript=)
12) (PreOfflineScript=)
13) (OfflineDoneScript=)
14) (FaultScript=)
15) (AutoStartUp=yes)
16) (AutoSwitchOver=HostFailure|ResourceFailure|ShutDown)
17) (PreserveState=no)
18) (PersistentFault=1)
19) (ShutdownPriority=)
20) (OnlinePriority=1)
21) (StandbyTransitions=ClearFaultRequest|StartUp|SwitchRequest)
22) (LicenseToKill=no)
23) (AutoBreak=yes)
24) (AutoBreakMaintMode=no)
25) (HaltFlag=no)
26) (PartialCluster=0)
27) (ScriptTimeout=)
Choose the setting to process: 25

  19. Select [yes].

    1) HELP
2) RETURN
3) yes
4) no
Set the Halt mode: 3

  20. Ensure that all attributes are displayed as set in the previous steps, and then select [SAVE+EXIT].

    Machines+Basics (app1:consistent)
 1) HELP
 2) -
 3) SAVE+EXIT
 4) REMOVE+EXIT
 5) AdditionalMachine
 6) AdditionalConsole
 7) Machines[0]=pcl-vm13RMS
 8) Machines[1]=pcl-vm14RMS
 9) (PreCheckScript=)
10) (PreOnlineScript=)
11) (PostOnlineScript=)
12) (PreOfflineScript=)
13) (OfflineDoneScript=)
14) (FaultScript=)
15) (AutoStartUp=yes)
16) (AutoSwitchOver=HostFailure|ResourceFailure|ShutDown)
17) (PreserveState=no)
18) (PersistentFault=1)
19) (ShutdownPriority=)
20) (OnlinePriority=1)
21) (StandbyTransitions=ClearFaultRequest|StartUp|SwitchRequest)
22) (LicenseToKill=no)
23) (AutoBreak=yes)
24) (AutoBreakMaintMode=no)
25) (HaltFlag=yes)
26) (PartialCluster=0)
27) (ScriptTimeout=)
Choose the setting to process: 3

  21. The following window will be displayed:

    Settings of turnkey wizard "STANDBY" (APP1:not yet consistent)
 1) HELP                                 9) Procedure:BasicApplication(-)
 2) -                                   10) Symfoware(-)
 3) SAVE+EXIT                           11) Procedure:SystemState3(-)
 4) -                                   12) Procedure:SystemState2(-)
 5) ApplicationName=APP1                13) Gls:Global-Link-Services(-)
 6) Machines+Basics(app1)               14) IpAddresses(-)
 7) CommandLines(-)                     15) LocalFileSystems(-)
 8) Procedure:Application(-)            16) Gds:Global-Disk-Services(-)
Choose the setting to process:

PreviousNext
Copyright 2013-2014 FUJITSU LIMITED