Systemwalker Software Configuration Manager Installation Guide

B.1.1 When a Systemwalker Centric Manager Operation Management Server is installed on a computer where a Systemwalker Software Configuration Manager Admin Server has already been installed

Follow the steps below to install a Systemwalker Centric Manager Operation Management Server:

Stop Systemwalker Software Configuration Manager and install Systemwalker Centric Manager

1. If the Systemwalker Software Configuration Manager Admin Server, then stop it.

   Refer to "Starting and Stopping Systemwalker Software Configuration Manager" in the Operation Guide for details.

   Enable auto-start of service.

   [Windows]

   Using the Windows(R) Services function, change Startup type for the following services from Manual to Automatic.

   • Systemwalker MpAosfB

   • Systemwalker MpAosfP

   • Systemwalker MpAosfX

2. Stop Interstage.

   Method 1: Via the Interstage Management Console.

   Method 2: Via the command line:

   isstop -f

3. Install a Systemwalker Centric Manager Operation Management Server.

   Refer to the Systemwalker Centric Manager Installation Guide for details.

4. Restart the computer.

5. Perform steps 1 and 2 again.

Create an environment and start Systemwalker Centric Manager

Create an environment for Systemwalker Centric Manager.

[Windows]

Note

Environments in which a Systemwalker Software Configuration Manager Admin Server has been installed already have an ObjectDirector environment, so there is no need to recreate it. Refer to the Systemwalker Centric Manager User's Guide - Running Interstage, Symfoware and ObjectDirector for details (provided from Systemwalker CentricMGR V10.0L20 and later).

1. Start the Operation Environment Maintenance Wizard.

2. Select "Create Operation Environment" to create a Systemwalker Centric Manager environment.
   (Click No when prompted to confirm whether to rebuild the environment)

3. Start the Systemwalker Centric Manager service:

   C:\><Systemwalker Centric Manager installation directory>\MPWALKER.DM\bin\scentricmgr

   
   

[Linux]

1. Set up Systemwalker Centric Manager:

   # /opt/systemwalker/bin/MpFwSetup -mix

   • In the setup menu, enter "1" to create a Systemwalker Centric Manager environment.

   • In the Connection environment check result window, enter "2" to continue processing without recreating the Systemwalker Centric Manager environment.

   • In the setup menu, enter "3" to start each daemon for Systemwalker Centric Manager.

Start Interstage and Systemwalker Software Configuration Manager

1. If using Windows Admin server, start Interstage HTTP Service by ihsstart command.

   If using Linux Admin server, you do not execute this procedure.

   ihsstart -all

2. Start Interstage.

   Method 1: Via the Interstage Management Console.

   Method 2: Via the command line:

   isstop -f

3. Start the Systemwalker Software Configuration Manager Admin Server:

   Refer to "Starting and Stopping Systemwalker Software Configuration Manager" in the Operation Guide for details.