The command ended normally.
Explanation
The command is completed successfully.
System Response
The command completes processing.
System Administrator Corrective Action
No action is required.
An unexpected error occurred during processing.
Explanation
An unexpected error occurred during processing.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting the troubleshooting information" in the Operation Guide (ETERNUS SF Express Operation Guide or ETERNUS SF Storage Cruiser Operation Guide) of the product in use to collect the information required for troubleshooting and contact Fujitsu Technical Support.
An error occurred during processing. detail=detail
Explanation
An error occurred during the command processing.
Parameters
detail : Detail message
System Response
The system terminates processing.
System Administrator Corrective Action
Perform the appropriate action for an error shown in detail to try again.
There is an error in command syntax.
Explanation
A command syntax error has occurred.
System Response
The system terminates processing.
System Administrator Corrective Action
Check the command syntax, and execute again.
The license required to run this command is not registered.
Explanation
The license required to execute this command is not registered.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to the manual related to this command to register a required license.
ETERNUS SF Manager is not started or is during start-up, and the executed command is not available.
Explanation
The executed command cannot be used because ETERNUS SF Manager is not started or is during start-up.
System Response
The system terminates processing.
System Administrator Corrective Action
Check that the esccs10000 message to show that service is running is output to the system log (event log), and execute the command again.
If you still have a problem, collect the information required for troubleshooting and contact Fujitsu Technical Support.
The command was successfully executed, but the command execution output failed to be displayed.
Explanation
The command was successfully executed, but the execution result failed to be displayed.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to the operation history on the Web Console to check the command execution result. In addition, collect the information required for troubleshooting and contact Fujitsu Technical Support.
The command was canceled.
Explanation
The command was cancelled.
System Response
The command terminates processing.
System Administrator Corrective Action
No action is required.
The command is not run by operating system administrator privileges.
Explanation
The command is not executed by operating system administrator privileges.
System Response
The system terminates processing.
System Administrator Corrective Action
Execute the command with the operating system administrator privileges.
The specified copy group is not for NAS backup. The copy group name=copyGroup
Explanation
The specified copy group is not for NAS backup. Or, the NAS backup setting is not performed.
Parameters
copyGroup : Copy group name
System Response
The system terminates processing.
System Administrator Corrective Action
For the copy group for NAS volume, specify the copy group name of NAS backup setting. Its copy group name can be confirmed with the Web Console.
Cannot backup NAS volume because NAS backup volume is mounted.
Explanation
The NAS volume cannot be backed up because the NAS backup volume is mounted.
System Response
The system terminates processing.
System Administrator Corrective Action
Unmount the NAS backup volume to execute the command again.
Operation is accepted.
Explanation
Operation is accepted.
System Response
The system starts processing.
Operator Corrective Action
No action is required.
System Administrator Corrective Action
No action is required.
Operation has already been accepted.
Explanation
Operation cannot be accepted because its operation has already been accepted.
System Response
The system terminates processing.
Operator Corrective Action
After confirming that "Complete" is displayed in IMPORT STATUS column in esfadm devconf importstatus command, execute the command again.
If this error is repeated though the IMPORT STATUS column is "Complete", contact the system administrator.
System Administrator Corrective Action
Collect the information required for troubleshooting by the esfsnap command and contact Fujitsu Technical Support.
Operation is not accepted.
Explanation
Operation cannot be accepted because the error is detected during requesting the operation.
System Response
The system terminates processing.
Operator Corrective Action
Execute the operation again.
If this error is repeated, contact the system administrator.
System Administrator Corrective Action
Check whether the following problems occur at the file system in which the ETERNUS SF product is installed.
Insufficient free space
Hardware error
If you still have a problem, collect the information required for troubleshooting by the esfsnap command and contact Fujitsu Technical Support.
Because the command to import configuration information is not executed, its import status cannot be displayed.
Explanation
The configuration import status cannot be displayed because the request to import configuration information is not accepted.
System Response
The system terminates processing.
Operator Corrective Action
Execute the esfadm devconf import command and then try again.
If this error is repeated after executing the esfadm devconf import command, contact the system administrator.
System Administrator Corrective Action
If you still have a problem, collect the information required for troubleshooting by the esfsnap command and contact Fujitsu Technical Support.
