The explanation of the install parameters described below:
Parameter name | Description | Default value |
|---|---|---|
Installation_function | When installing ETERNUS SF Manager, set to [1]. | 1 |
Character_code | Specify the character encoding used in AdvancedCopy Manager. For Linux, specify the following numbers corresponding to the character codes. | None (*4) |
ETERNUS_SF_Manager_apache_service | Web Console service port number (*6) | 9855 |
Communications_service_1 | Communications service 1 port number (*6) | 1226 |
Communications_service_2 | Communications service 2 port number (*6) | 4917 |
Repository_service_1 | Repository service 1 port number (*6) | 32004 |
Repository_service_2 | Repository service 2 port number (*6) | 15432 |
Remote_access_service | Remote access service port number (*6) | 9851 |
Exclusive_control_service | Exclusive control service port number (*6) | 9852 |
Internal_port_1 | Port numbers for various internal services (*6) | 28005 |
Internal_port_2 | 28009 | |
Internal_port_3 | 28443 | |
Internal_port_4 | 24916 | |
Internal_port_5 | 24917 | |
DB_file_directory | DB file directory | /var/opt/FJSVswstf/sfwswstf/db |
RDB_dictionary_directory | RDB dictionary directory | /var/opt/FJSVswstf/sfwswstf/dic |
RDB_log_file_directory | RDB log file directory | /var/opt/FJSVswstf/sfwswstf/log |
Repository_DB_space_directory | Repository DB space directory | /var/opt/FJSVswstf/sfwswstf/dbsp |
Repository_data_size | Repository DB size (MB) | 65 |
Management_server_IP_address | Management Server IP address (*1) (*5) | None |
AdvancedCopy_Manager_ARCH | Architecture of AdvancedCopy Manager to be installed (*2) | None |
esfpostgres_UID | User ID which ETERNUS SF Manager internally uses on installation of PRIMECLUSTER (*3) | None |
*1: When the Management Server has two or more IP addresses, specify the IP address which is available for communicating with the Management Server from all of the AdvancedCopy Manager's agents.
*2: If 32-bit architecture Symfoware is installed on Red Hat Enterprise Linux 5 (for Intel64), specify "1" to install 32-bit architecture AdvancedCopy Manager. Specify a blank in other cases.
*3: On installation in PRIMECLUSTER environments, specify an unregistered user ID for the system by using integer number from 100 to 59999. Specify a blank in other cases.
*4: If no number is specified for Character_code (default value), the character code will be as follows:
For Solaris 10: "EUC"
For Solaris 11: "UTF8"
For Linux: "UTF8"
*5: Specify the IPv4 address confirmed with "3.1.9 IP address confirmation". Specify the IPv4 address when operating the Management Server with both IPv4 and IPv6 or when operating the Management Server with IPv6 only. Add and change the IPv6 address after installation is complete, referring to "4.4.5 Updating Management Server IP address information".
*6: When changing a port number, specify an unused port number. Values between 1024 and 65535 are valid.
Point
Only LF is permitted for linefeed code. Do not use CR+LF or CR.
Do not use double-byte character such as double-byte space.
