8.1 Configuring the network environment

In order to enable the server on which the AdvancedCopy Manager CCM is installed (hereafter referred to as "CCM Server") to communicate with the ETERNUS Disk storage systems to be managed, configure the network environment. Refer to the ETERNUS Web GUI manual for information on how to configure the network environment.

When setting up firewall between CCM Server and ETERNUS Disk storage system

If you set up a firewall between the CCM Server and ETERNUS Disk storage system, specify below port numbers so as to enable transmissions to pass the firewall.

The port numbers depend on the model of ETERNUS Disk storage system.

Port number/Protocol	Communication start direction	Function
1372/tcp	From the CCM Server to ETERNUS Disk storage system	Configuration management (For ETERNUS DX80 S2/DX90 S2, DX100 S3/DX200 S3, DX400 S2 series, DX500 S3/DX600 S3, DX8000 S2 series)
1999/tcp	From the CCM Server to ETERNUS Disk storage system	Configuration management
32002/tcp	From the CCM Server to ETERNUS Disk storage system	Advanced Copy (For ETERNUS DX80 S2/DX90 S2, DX100 S3/DX200 S3, DX400 S2 series, DX500 S3/DX600 S3, DX8000 S2 series)
22/tcp	From the CCM Server to ETERNUS Disk storage system	Configuration management (For ETERNUS DX80 S2/DX90 S2, DX100 S3/DX200 S3, DX400 S2 series, DX500 S3/DX600 S3, DX8000 S2 series)
23/tcp	From the CCM Server to ETERNUS Disk storage system	Configuration management (For ETERNUS DX60/DX60 S2/DX80/DX80 S2/DX90/DX90 S2, DX100 S3/DX200 S3, DX400 S2 series, DX500 S3/DX600 S3, DX8000 S2 series)