2.1 Supported devices

This section describes devices that are supported by Express, Storage Cruiser and AdvancedCopy Manager.

Devices supported by Express

Express supports the following storage devices.

ETERNUS DX60/DX60 S2
ETERNUS DX80/DX80 S2
ETERNUS DX90/DX90 S2
ETERNUS DX100 S3/DX200 S3

Note

The firmware versions of storage devices must be as shown in the table below:

Table 2.1 Storage devices and compatible firmware version numbers
Storage device name	Compatible firmware version number
ETERNUS DX60/DX80/DX90	V10L31 or later
ETERNUS DX60 S2	V20L10 or later
ETERNUS DX80 S2/DX90 S2	V10L16 or later
ETERNUS DX100 S3/DX200 S3	V10L10 or later

For using Remote Advanced Copy between ETERNUS DX90 and ETERNUS DX90 S2, the firmware version of ETERNUS DX90 must be updated to V10L61 or later.

Enable the following settings for the interface to storage device ETERNUS:

Table 2.2 Storage devices and interface settings
Storage device name	Interface settings
ETERNUS DX60/DX60 S2DX80/DX90	Telnet connection
ETERNUS DX80 S2/DX90 S2 ETERNUS DX100 S3/DX200 S3	SSH connection or telnet connection

Devices supported by Storage Cruiser

Storage Cruiser supports the following devices:

Device type	Device name
Storage device	ETERNUS DX series ETERNUS CS800, ETERNUS CS2000 ETERNUS VS850 NetApp FAS Series NetApp V-Series
Tape library	ETERNUS LT series
Fibre Channel switch	ETERNUS SN200 PRIMERGY BX600 Fibre Channel Switch Blade Brocade series
Converged Switch	Brocade VDX series PRIMERGY BX Ethernet Fabric Switch
Others	Solaris, Windows, Linux, HP-UX, and AIX server nodes with Storage Cruiser's agent installed VMware vSphere 4 or later

Note

The firmware versions of ETERNUS DX80 S2/DX90 S2, DX100 S3/DX200 S3, DX400 S2 series, DX500 S3/DX600 S3 must be as shown in the table below.

Table 2.3 ETERNUS Disk storage systems and compatible firmware version numbers
Model name	Compatible firmware version number
ETERNUS DX80 S2/DX90 S2	V10L16 or later
ETERNUS DX100 S3/DX200 S3	V10L10 or later
ETERNUS DX400 S2 series	V10L16 or later
ETERNUS DX500 S3/DX600 S3	V10L10 or later

Enable the following settings for the interface to ETERNUS Disk storage systems:

Table 2.4 ETERNUS Disk storage systems and interface settings
Model name	Interface settings
ETERNUS DX60/DX60 S2DX80/DX90	Telnet connection
ETERNUS DX80 S2/DX90 S2 ETERNUS DX100 S3/DX200 S3 ETERNUS DX400 S2 series ETERNUS DX500 S3/DX600 S3 ETERNUS DX8000 S2 series	SSH connection or telnet connection

When using the reporting function, use the following devices and firmware version numbers.

Table 2.5 ETERNUS Disk storage systems and compatible firmware version numbers
Model name	Compatible firmware version number
ETERNUS DX80 S2/DX90 S2 ETERNUS DX400 S2 series ETERNUS DX8000 S2 series	V10L40 or later
ETERNUS DX100 S3/DX200 S3 ETERNUS DX500 S3/DX600 S3	V10L10 or later

Devices supported by AdvancedCopy Manager

AdvancedCopy Manager supports the following ETERNUS Disk storage systems.

ETERNUS DX series

Note

The firmware versions of ETERNUS DX60/DX60 S2/DX80/DX80 S2/DX90/DX90 S2 must be as shown in the table below.

Table 2.6 ETERNUS Disk storage system and compatible firmware version numbers
Model name	Compatible firmware version number
ETERNUS DX60/DX80/DX90	V10L31 or later
ETERNUS DX60 S2	V20L10 or later
ETERNUS DX80 S2/DX90 S2	V10L16 or later

For using Remote Advanced Copy between DX90 and DX90 S2, the firmware version of DX90 must be updated to V10L61 or later.

Enable the following settings for the interface to ETERNUS Disk storage systems:

Table 2.7 ETERNUS Disk storage systems and interface settings
Model name	Interface settings
ETERNUS DX60/DX60 S2DX80/DX90	Telnet connection
ETERNUS DX80 S2/DX90 S2 ETERNUS DX100 S3/DX200 S3 ETERNUS DX400 S2 series ETERNUS DX500 S3/DX600 S3 ETERNUS DX8000 S2 series	SSH connection or telnet connection

Information

With AdvancedCopy Manager CCM, the devices listed below can use Copy command via SAN and via LAN.

Table 2.8 ETERNUS Disk storage system supporting Copy command via SAN and via LAN
Device name	Copy command via SAN		Copy command via LAN
Device name	Operation	Firmware version	Operation	Firmware version
ETERNUS DX60/DX60 S2/DX80	A	All versions	N/A	-
ETERNUS DX90	A	All versions	A (*1)	V10L61 or later
ETERNUS DX80 S2/DX90 S2	A	All versions	A	All versions
ETERNUS DX100 S3/DX200 S3	A	All versions	A	All versions
ETERNUS DX400 series	A	All versions	A (*1)	V20L71 or later
ETERNUS DX400 S2 series	A	All versions	A	All versions
ETERNUS DX500 S3/DX600 S3	A	All versions	A	All versions
ETERNUS DX8000 series	A	All versions	A (*1)	V20L71 or later
ETERNUS DX8000 S2 series	A	All versions	A	All versions

(A=Available, N/A=Not Available)

*1: acarray add (ETERNUS Disk storage system registration command) cannot be executed with the -lan option.

Refer to "System Configuration" in the ETERNUS SF AdvancedCopy Manager Operation Guide for Copy Control Module for information on Copy command via SAN and via LAN.