4.8.2 acec query (Synchronous high-speed copy status display command)

NAME

acec query - Display the copy status of synchronous high-speed copying

SYNOPSIS

acec query -g copyGroup [-p copyPair] [-r] [-progress] [-da] [-date] [-xml]
acec query -g copyGroup [-p copyPair] [-r] -all [-xml]

DESCRIPTION

This command displays the status of the synchronous high-speed copy for the specified copy group or copy pair.

OPTIONS

-g copyGroup: This option specifies the copy group name.

-p copyPair: This option specifies a copy pair.

-r: This option displays the status of a copy in the reverse direction to the direction that has been specified.

-progress: This option displays the progress of copy processes.

-da: This option displays the suppression settings for access to the EC/REC copy destination area.

-date: This option displays the last execution date of synchronous high-speed copy for the copy pair.

-all: This option specifies the displaying by the extended format.
Refer to the table of EXAMPLES for the displayed items.

-xml: This option specifies when displaying by the XML format.

EXIT STATUS

=0 : Completed successfully
>0 : Terminated abnormally

EXAMPLES

For EC

When -progress, -da and -date options are not specified:

> acec query -g ECGroup

Copy Group Name : ECGroup
Copy Group Type : EC
Disk Array Name : ET002 (00ETERNUSDXH##ET87S20A####NC4110699004##)

Source    <=> Target    SID  EC Status               Copy Phase Copied Block
--------- --- --------- ---- ----------------------- ---------- ------------
ET002/0x1 N/A ET002/0x3 N/A  "EC action not startup" "Not set"             0
ET002/0x2 ==> ET002/0x4 0x41 "EC Executing"          "Copying"       1048576

When -progress option is specified:

> acec query -g ECGroup -progress

Copy Group Name : ECGroup
Copy Group Type : EC
Disk Array Name : ET002 (00ETERNUSDXH##ET87S20A####NC4110699004##)

Source    <=> Target    Progress Copied Block Total Block
--------- --- --------- -------- ------------ -----------
ET002/0x1 N/A ET002/0x3      N/A          N/A         N/A
ET002/0x2 ==> ET002/0x4      45%       471859     1048576

When -da option is specified:

> acec query -g ECGroup -da

Copy Group Name : ECGroup
Copy Group Type : EC
Disk Array Name : ET002 (00ETERNUSDXH##ET87S20A####NC4110699004##)

Source    <=> Target    SID  EC Status               Copy Phase Copied Block Copy DA
--------- --- --------- ---- ----------------------- ---------- ------------ -------
ET002/0x1 N/A ET002/0x3 N/A  "EC action not startup" "Not set"           N/A     off
ET002/0x2 ==> ET002/0x4 0x41 "EC Executing"          "Copying"        471859      on

When -date option is specified:

> acec query -g ECGroup -date

Copy Group Name : ECGroup
Copy Group Type : EC
Disk Array Name : ET002 (00ETERNUSDXH##ET87S20A####NC4110699004##)

Source    <=> Target    SID  EC Status               Copy Phase Copied Block Operation Date
--------- --- --------- ---- ----------------------- ---------- ------------ ---------------------
ET002/0x1 N/A ET002/0x3 N/A  "EC action not startup" "Not set"           N/A "----/--/-- --:--:--"
ET002/0x2 ==> ET002/0x4 0x41 "EC Suspend"            "Paired"         471859 "2010/10/20 09:00:00"

When -progress, -da and -date options are specified, or -all option is specified:

> acec query -g ECGroup -progress -da -date

Copy Group Name : ECGroup
Copy Group Type : EC
Disk Array Name : ET002 (00ETERNUSDXH##ET87S20A####NC4110699004##)

Source    <=> Target    SID  EC Status               Copy Phase Progress Copied Block Total Block Copy DA Operation Date
--------- --- --------- ---- ----------------------- ---------- -------- ------------ ----------- ------- ---------------------
ET002/0x1 N/A ET002/0x3 N/A  "EC action not startup" "Not set"       N/A          N/A         N/A     off "----/--/-- --:--:--"
ET002/0x2 ==> ET002/0x4 0x41 "EC Suspend"            "Paired"       100%      1048576     1048576      on "2010/10/20 09:00:00"

The following table shows the meanings of the information displayed.

Table 4.18 When -progress, -da and -date options are not specified
Title	Explanation
Copy Group Name	Displays the copy group name.
Copy Group Type	Displays the type of copy that has been set up for the copy group.
Disk Array Name	Displays the Box ID and ETERNUS name that was specified with -a option for acgroup create (Copy group creation command).
Source	Displays the logical volume for the copy source.
<=>	Displays the copy direction. N/A: No copying is performed. ==>: Copying from the source to the target. <==: Copying from the target to the source.
Target	Displays the logical volume for the copy destination.
SID	Displays the session ID.
EC Status	Displays the execution status of the EC. EC Starting: The EC is starting up. EC Executing: The EC is executing. EC Suspend: The EC is suspended. EC action not startup: The specified session does not exist. EC Error Suspend: An error has occurred, preventing the copy process from continuing.
Copy Phase	Displays the current phase. Copying: Copy processing is executing. Paired: The copy is in the equivalency maintenance state. Not set: Either the specified session does not exist, or the copy process is not running.
Copied Block	Displays the number of blocks that have been copied.

Table 4.19 When -progress option is specified
Title	Explanation
Copy Group Name	Displays the copy group name.
Copy Group Type	Displays the type of copy that has been set up for the copy group.
Disk Array Name	Displays the Box ID and ETERNUS name that was specified with -a option for acgroup create (Copy group creation command).
Source	Displays the logical volume for the copy source.
<=>	Displays the copy direction. N/A: No copying is performed. ==>: Copying from the source to the target. <==: Copying from the target to the source.
Target	Displays the logical volume for the copy destination.
Progress	Displays the progress of copy processes as a percentage. The "N/A" is displayed when the copy process is not executed. If the progress of copy processes is unknown, it is displayed "???".
Copied Block	Displays the number of blocks that have been copied. The "N/A" is displayed when the copy process is not executed. If the number of copied blocks is unknown, it is displayed "???".
Total Block	Displays the number of total blocks. If the number of total blocks is unknown, it is displayed "???".

Table 4.20 When -da option is specified
Title	Explanation
Copy Group Name	Displays the copy group name.
Copy Group Type	Displays the type of copy that has been set up for the copy group.
Disk Array Name	Displays the Box ID and ETERNUS name that was specified with -a option for acgroup create (Copy group creation command).
Source	Displays the logical volume for the copy source.
<=>	Displays the copy direction. N/A: No copying is performed. ==>: Copying from the source to the target. <==: Copying from the target to the source.
Target	Displays the logical volume for the copy destination.
SID	Displays the session ID.
EC Status	Displays the execution status of the EC. EC Starting: The EC is starting up. EC Executing: The EC is executing. EC Suspend: The EC is suspended. EC action not startup: The specified session does not exist. EC Error Suspend: An error has occurred, preventing the copy process from continuing.
Copy Phase	Displays the current phase. Copying: Copy processing is executing. Paired: The copy is in the equivalency maintenance state. Not set: Either the specified session does not exist, or the copy process is not running.
Copied Block	Displays the number of blocks that have been copied.
Copy DA	If the copy type is EC/REC, this displays the suppression settings for access to the copy destination area. on : Access is suppressed. off: Access is not suppressed. If the access suppression setting is unknown, it is displayed "???".

Table 4.21 When -date option is specified
Title	Explanation
Copy Group Name	Displays the copy group name.
Copy Group Type	Displays the type of copy that has been set up for the copy group.
Disk Array Name	Displays the Box ID and ETERNUS name that was specified with -a option for acgroup create (Copy group creation command).
Source	Displays the logical volume for the copy source.
<=>	Displays the copy direction. N/A: No copying is performed. ==>: Copying from the source to the target. <==: Copying from the target to the source.
Target	Displays the logical volume for the copy destination.
SID	Displays the session ID.
EC Status	Displays the execution status of the EC. EC Starting: The EC is starting up. EC Executing: The EC is executing. EC Suspend: The EC is suspended. EC action not startup: The specified session does not exist. EC Error Suspend: An error has occurred, preventing the copy process from continuing.
Copy Phase	Displays the current phase. Copying: Copy processing is executing. Paired: The copy is in the equivalency maintenance state. Not set: Either the specified session does not exist, or the copy process is not running.
Copied Block	Displays the number of blocks that have been copied.
Operation Date	If an EC session exists, it displays the date for when the EC session state transitions indicated below last occurred (last execution date) in a "yyyy/mm/dd hh:mm:ss" format. The displaying of the date is performed on the basis of the target device's time zone. Suspend (execution of acec suspend) Concurrent suspend (execution of acec suspend -concur) State transition to an error Suspend (EC Status field displays "EC Error Suspend"). If any of the following conditions apply, the date will be displayed as "----/--/-- --:--:--." If an EC session does not exist (EC Status field displays "EC action not startup") If the initial copy (acec start) was started from a status of an EC session not existing If the EC session's copy status could not be acquired from the device (EC Status field displays "???") If using a device for which the last execution date recording function is not supported (ETERNUS DX60/DX60 S2/DX80/DX90, ETERNUS DX400 series, ETERNUS DX8000 series, ETERNUS2000, ETERNUS4000, ETERNUS8000)

Table 4.22 When -progress, -da and -date options are specified, or -all option is specified
Title	Explanation
Copy Group Name	Displays the copy group name.
Copy Group Type	Displays the type of copy that has been set up for the copy group.
Disk Array Name	Displays the Box ID and ETERNUS name that was specified with -a option for acgroup create (Copy group creation command).
Source	Displays the logical volume for the copy source.
<=>	Displays the copy direction. N/A: No copying is performed. ==>: Copying from the source to the target. <==: Copying from the target to the source.
Target	Displays the logical volume for the copy destination.
SID	Displays the session ID.
EC Status	Displays the execution status of the EC. EC Starting: The EC is starting up. EC Executing: The EC is executing. EC Suspend: The EC is suspended. EC action not startup: The specified session does not exist. EC Error Suspend: An error has occurred, preventing the copy process from continuing.
Copy Phase	Displays the current phase. Copying: Copy processing is executing. Paired: The copy is in the equivalency maintenance state. Not set: Either the specified session does not exist, or the copy process is not running.
Progress	Displays the progress of copy processes as a percentage. The "N/A" is displayed when the copy process is not executed. If the progress of copy processes is unknown, it is displayed "???".
Copied Block	Displays the number of blocks that have been copied.
Total Block	Displays the number of total blocks. If the number of total blocks is unknown, it is displayed "???".
Copy DA	If the copy type is EC/REC, this displays the suppression settings for access to the copy destination area. on : Access is suppressed. off: Access is not suppressed. If the access suppression setting is unknown, it is displayed "???"
Operation Date	If an EC session exists, it displays the date for when the EC session state transitions indicated below last occurred (last execution date) in a "yyyy/mm/dd hh:mm:ss" format. The displaying of the date is performed on the basis of the target device's time zone. Suspend (execution of acec suspend) Concurrent suspend (execution of acec suspend -concur) State transition to an error Suspend (EC Status field displays "EC Error Suspend"). If any of the following conditions apply, the date will be displayed as "----/--/-- --:--:--." If an EC session does not exist (EC Status field displays "EC action not startup") If the initial copy (acec start) was started from a status of an EC session not existing If the EC session's copy status could not be acquired from the device (EC Status field displays "???") If using a device for which the last execution date recording function is not supported (ETERNUS DX60/DX60 S2/DX80/DX90, ETERNUS DX400 series, ETERNUS DX8000 series, ETERNUS2000, ETERNUS4000, ETERNUS8000)

For REC

When the -progress, -da and -date options are not specified:

> acec query -g RECGroup

Copy Group Name        : RECGroup
Copy Group Type        : REC
Disk Array Name        : ET001 (00ETERNUSDXM##ET44S20A####HK000104######)
Remote Disk Array Name : ET002 (00ETERNUSDXH##ET87S20A####NC4110699004##)

Source    <=> Target    SID(RSID)  EC Status               Copy Phase Copied Block Rcv  Split Xfer
--------- --- --------- ---------- ----------------------- ---------- ------------ ---- ----- -------
ET001/0x1 N/A ET002/0x6 N/A        "EC action not startup" "Not set"             0 ---- ----  ----
ET001/0x2 ==> ET002/0x7 0x4A(0x11) "EC Executing"          "Copying"             0 auto ----  through
ET001/0x3 ==> ET002/0x8 0x4C(0x13) "EC Suspend"            "Paired"        1048576 auto ----  through

When the -progress option is specified:

> acec query -g RECGroup -progress

Copy Group Name        : RECGroup
Copy Group Type        : REC
Disk Array Name        : ET001 (00ETERNUSDXM##ET44S20A####HK000104######)
Remote Disk Array Name : ET002 (00ETERNUSDXH##ET87S20A####NC4110699004##)

Source    <=> Target    Progress Copied Block Total Block
--------- --- --------- -------- ------------ -----------
ET001/0x1 N/A ET002/0x6      N/A          N/A         N/A
ET001/0x2 ==> ET002/0x7      45%       471859     1048576
ET001/0x3 ==> ET002/0x8     100%      1048576     1048576

When the -da option is specified:

> acec query -g RECGroup -da

Copy Group Name        : RECGroup
Copy Group Type        : REC
Disk Array Name        : ET001 (00ETERNUSDXM##ET44S20A####HK000104######)
Remote Disk Array Name : ET002 (00ETERNUSDXH##ET87S20A####NC4110699004##)
Source    <=> Target    SID(RSID)  EC Status               Copy Phase Copied Block Rcv  Split Xfer    Copy DA
--------- --- --------- ---------- ----------------------- ---------- ------------ ---- ----- ------- -------
ET001/0x1 N/A ET002/0x6 N/A        "EC action not startup" "Not set"             0 ---- ----  ----        off
ET001/0x2 ==> ET002/0x7 0x4A(0x11) "EC Executing"          "Copying"        471859 auto ----  through      on
ET001/0x3 ==> ET002/0x8 0x4C(0x13) "EC Suspend"            "Paired"        1048576 auto ----  through      on

When the -date option is specified:

> acec query -g RECGroup -date

Copy Group Name        : RECGroup
Copy Group Type        : REC
Disk Array Name        : ET001 (00ETERNUSDXM##ET44S20A####HK000104######)
Remote Disk Array Name : ET002 (00ETERNUSDXH##ET87S20A####NC4110699004##)
Source    <=> Target    SID(RSID)  EC Status               Copy Phase Copied Block Rcv  Split Xfer    Operation Date
--------- --- --------- ---------- ----------------------- ---------- ------------ ---- ----- ------- ---------------------
ET001/0x1 N/A ET002/0x6 N/A        "EC action not startup" "Not set"             0 ---- ----  ----    "----/--/-- --:--:--"
ET001/0x2 ==> ET002/0x7 0x4A(0x11) "EC Executing"          "Copying"        471859 auto ----  through "----/--/-- --:--:--"
ET001/0x3 ==> ET002/0x8 0x4C(0x13) "EC Suspend"            "Paired"        1048576 auto ----  through "2010/10/18 13:00:00"

When the -progress, -da and -date options are specified or -all option is specified:

> acec query -g RECGroup -progress -da -date

Copy Group Name        : RECGroup
Copy Group Type        : REC
Disk Array Name        : ET001 (00ETERNUSDXM##ET44S20A####HK000104######)
Remote Disk Array Name : ET002 (00ETERNUSDXH##ET87S20A####NC4110699004##)

Source    <=> Target    SID(RSID)  EC Status               Copy Phase Progress Copied Block Total Block Rcv  Split Xfer    Copy DA Operation Date
--------- --- --------- ---------- ----------------------- ---------- -------- ------------ ----------- ---- ----- ------- ------- ---------------------
ET001/0x1 N/A ET002/0x6 N/A        "EC action not startup" "Not set"        0%            0           0 ---- ----  ----        off "----/--/-- --:--:--"
ET001/0x2 ==> ET002/0x7 0x4A(0x11) "EC Executing"          "Copying"       45%       471859     1048576 auto ----  through      on "----/--/-- --:--:--"
ET001/0x3 ==> ET002/0x8 0x4C(0x13) "EC Suspend"            "Paired"       100%      1048576     1048576 auto ----  through      on "2010/10/18 13:00:00"

The following table shows the meanings of the information displayed.

Table 4.23 When -progress, -da and -date options are not specified
Title	Explanation
Copy Group Name	Displays the copy group name.
Copy Group Type	Displays the type of copy that has been set up for the copy group.
Disk Array Name	Displays the Box ID and ETERNUS name that was specified with -a option for acgroup create (Copy group creation command).
Remote Disk Array Name	Displays the Box ID and ETERNUS name that was specified with -remote option for acgroup create (Copy group creation command).
Source	Displays the logical volume for the copy source.
<=>	Displays the copy direction. N/A: No copying is performed. ==>: Copying from the source to the target. <==: Copying from the target to the source.
Target	Displays the logical volume for the copy destination.
SID(RSID)	Displays the Session ID of ETERNUS Disk storage system (i.e. the Disk Array Name) and the Session ID of remote ETERNUS Disk storage system (i.e. the Remote Disk Array Name).
EC Status	Displays the execution status of the REC. EC Starting: The REC is starting up. EC Executing: The REC is executing. EC Suspend: The REC is suspended EC action not startup: The specified session does not exist. EC Error Suspend: An error has occurred, preventing the copy process from continuing. EC Hardware Suspend: The REC has paused because of a hardware error, such as a problem with the path between hardware devices. EC Hardware Suspend(Use REC DISK): The REC Disk buffer is in use because of a hardware error, such as a problem with the path between hardware devices. EC Hardware Suspend(Use REC BUFFER): The REC transfer buffer is in use because of a hardware error, such as a problem with the path between hardware devices. "EC Hardware Suspend(Use REC DISK)" and "EC Hardware Suspend(Use REC BUFFER)" are displayed in the following case. When the ETERNUS Disk storage system that was specified with -a option for acgroup create (Copy group creation command) is the copy source device of REC.
Copy Phase	Displays the current phase. Copying: Copy processing is executing. Paired: The copy is in the equivalency maintenance state. Not set: Either the specified session does not exist, or the copy process is not running.
Copied Block	Displays the number of blocks that have been copied.
Rcv	Displays the recovery mode for REC copies. auto: Indicates that the recovery mode is "Automatic". manual: Indicates that the recovery mode is "Manual". ----: Indicates that a REC copy is not being performed.
Split	Displays the split mode for REC copies. auto: Indicates that the split mode is "Automatic". manual: Indicates that the split mode is "Manual". ----: Indicates that either a REC copy is not being performed or that the mode is not synchronous mode.
Xfer	Displays the transfer mode for REC copies. sync: Indicates that the transfer mode is "Synchronous". through: Indicates that the transfer mode is "Through". consist: Indicates that the transfer mode is "Consistency". stack: Indicates that the transfer mode is "Stack". ----: REC copy is not being performed.

Table 4.24 When -progress option is specified
Title	Explanation
Copy Group Name	Displays the copy group name.
Copy Group Type	Displays the type of copy that has been set up for the copy group.
Disk Array Name	Displays the Box ID and ETERNUS name that was specified with -a option for acgroup create (Copy group creation command).
Remote Disk Array Name	Displays the Box ID and ETERNUS name that was specified with -remote option for acgroup create (Copy group creation command).
Source	Displays the logical volume for the copy source.
<=>	Displays the copy direction. N/A: No copying is performed. ==>: Copying from the source to the target. <==: Copying from the target to the source.
Target	Displays the logical volume for the copy destination.
Progress	Displays the progress of copy processes as a percentage. The "N/A" is displayed when the copy process is not executed. If the progress of copy processes is unknown, it is displayed "???".
Copied Block	Displays the number of blocks that have been copied. The "N/A" is displayed when the copy process is not executed. If the number of copied blocks is unknown, it is displayed "???".
Total Block	Displays the number of total blocks. If the number of total blocks is unknown, it is displayed "???".

Table 4.25 When -da option is specified
Title	Explanation
Copy Group Name	Displays the copy group name.
Copy Group Type	Displays the type of copy that has been set up for the copy group.
Disk Array Name	Displays the Box ID and ETERNUS name that was specified with -a option for acgroup create (Copy group creation command).
Remote Disk Array Name	Displays the Box ID and ETERNUS name that was specified with -remote option for acgroup create (Copy group creation command).
Source	Displays the logical volume for the copy source.
<=>	Displays the copy direction. N/A: No copying is performed. ==>: Copying from the source to the target. <==: Copying from the target to the source.
Target	Displays the logical volume for the copy destination.
SID(RSID)	Displays the Session ID of ETERNUS Disk storage system (i.e. the Disk Array Name) and the Session ID of remote ETERNUS Disk storage system (i.e. the Remote Disk Array Name).
EC Status	Displays the execution status of the REC. EC Starting: The REC is starting up. EC Executing: The REC is executing. EC Suspend: The REC is suspended EC action not startup: The specified session does not exist. EC Error Suspend: An error has occurred, preventing the copy process from continuing. EC Hardware Suspend: The REC has paused because of a hardware error, such as a problem with the path between hardware devices. EC Hardware Suspend(Use REC DISK): The REC Disk buffer is in use because of a hardware error, such as a problem with the path between hardware devices. EC Hardware Suspend(Use REC BUFFER): The REC transfer buffer is in use because of a hardware error, such as a problem with the path between hardware devices. "EC Hardware Suspend(Use REC DISK)" and "EC Hardware Suspend(Use REC BUFFER)" are displayed in the following case. When the ETERNUS Disk storage system that was specified with -a option for acgroup create (Copy group creation command) is the copy source device of REC.
Copy Phase	Displays the current phase. Copying: Copy processing is executing. Paired: The copy is in the equivalency maintenance state. Not set: Either the specified session does not exist, or the copy process is not running.
Copied Block	Displays the number of blocks that have been copied.
Rcv	Displays the recovery mode for REC copies. auto: Indicates that the recovery mode is "Automatic". manual: Indicates that the recovery mode is "Manual". ----: Indicates that a REC copy is not being performed.
Split	Displays the split mode for REC copies. auto: Indicates that the split mode is "Automatic". manual: Indicates that the split mode is "Manual". ----: Indicates that either a REC copy is not being performed or that the mode is not synchronous mode.
Xfer	Displays the transfer mode for REC copies. sync: Indicates that the transfer mode is "Synchronous". through: Indicates that the transfer mode is "Through". consist: Indicates that the transfer mode is "Consistency". stack: Indicates that the transfer mode is "Stack". ----: REC copy is not being performed.
Copy DA	If the copy type is EC/REC, this displays the suppression settings for access to the copy destination area. on : Access is suppressed. off: Access is not suppressed. If the access suppression setting is unknown, it is displayed "???"

Table 4.26 When -date option is specified
Title	Explanation
Copy Group Name	Displays the copy group name.
Copy Group Type	Displays the type of copy that has been set up for the copy group.
Disk Array Name	Displays the Box ID and ETERNUS name that was specified with -a option for acgroup create (Copy group creation command).
Remote Disk Array Name	Displays the Box ID and ETERNUS name that was specified with -remote option for acgroup create (Copy group creation command).
Source	Displays the logical volume for the copy source.
<=>	Displays the copy direction. N/A: No copying is performed. ==>: Copying from the source to the target. <==: Copying from the target to the source.
Target	Displays the logical volume for the copy destination.
SID(RSID)	Displays the Session ID of ETERNUS Disk storage system (i.e. the Disk Array Name) and the Session ID of remote ETERNUS Disk storage system (i.e. the Remote Disk Array Name).
EC Status	Displays the execution status of the REC. EC Starting: The REC is starting up. EC Executing: The REC is executing. EC Suspend: The REC is suspended EC action not startup: The specified session does not exist. EC Error Suspend: An error has occurred, preventing the copy process from continuing. EC Hardware Suspend: The REC has paused because of a hardware error, such as a problem with the path between hardware devices. EC Hardware Suspend(Use REC DISK): The REC Disk buffer is in use because of a hardware error, such as a problem with the path between hardware devices. EC Hardware Suspend(Use REC BUFFER): The REC transfer buffer is in use because of a hardware error, such as a problem with the path between hardware devices. "EC Hardware Suspend(Use REC DISK)" and "EC Hardware Suspend(Use REC BUFFER)" are displayed in the following case. When the ETERNUS Disk storage system that was specified with -a option for acgroup create (Copy group creation command) is the copy source device of REC.
Copy Phase	Displays the current phase. Copying: Copy processing is executing. Paired: The copy is in the equivalency maintenance state. Not set: Either the specified session does not exist, or the copy process is not running.
Copied Block	Displays the number of blocks that have been copied.
Rcv	Displays the recovery mode for REC copies. auto: Indicates that the recovery mode is "Automatic". manual: Indicates that the recovery mode is "Manual". ----: Indicates that a REC copy is not being performed.
Split	Displays the split mode for REC copies. auto: Indicates that the split mode is "Automatic". manual: Indicates that the split mode is "Manual". ----: Indicates that either a REC copy is not being performed or that the mode is not synchronous mode.
Xfer	Displays the transfer mode for REC copies. sync: Indicates that the transfer mode is "Synchronous". through: Indicates that the transfer mode is "Through". consist: Indicates that the transfer mode is "Consistency". stack: Indicates that the transfer mode is "Stack". ----: REC copy is not being performed.
Operation Date	If an REC session exists, it displays the date for when the REC session state transitions indicated below last occurred (last execution date) in a "yyyy/mm/dd hh:mm:ss" format. The displaying of the date is performed on the basis of the target device's time zone. Starting of REC using the initial copy skip function (execution of acec start -skip) Suspend (execution of acec suspend) If a forced suspension was performed to an REC session in Hardware Suspend status, the last execution date will be initialized as "----/--/-- --:--:--." If a forced suspension was performed to an REC session while the execution of a copy was in progress, the last execution date will not be updated. Concurrent suspend (execution of acec suspend -concur) State transition to an error Suspend (EC Status field displays "EC Error Suspend"). State transition to a hardware Suspend (EC Status field displays "EC Hardware Suspend"). If any of the following conditions apply, the date will be displayed as "----/--/-- --:--:--." If an REC session does not exist (EC Status field displays "EC action not startup") If the initial copy (acec start) was started from a status of an REC session not existing If the REC session's copy status could not be acquired from the device (EC Status field displays "???") If using a device for which the last execution date recording function is not supported (ETERNUS DX60/DX60 S2/DX80/DX90, ETERNUS DX400 series, ETERNUS DX8000 series, ETERNUS2000, ETERNUS4000, ETERNUS8000)

Table 4.27 When -progress, -da and -date options are specified, or -all option is specified
Title	Explanation
Copy Group Name	Displays the copy group name.
Copy Group Type	Displays the type of copy that has been set up for the copy group.
Disk Array Name	Displays the Box ID and ETERNUS name that was specified with -a option for acgroup create (Copy group creation command).
Remote Disk Array Name	Displays the Box ID and ETERNUS name that was specified with -remote option for acgroup create (Copy group creation command).
Source	Displays the logical volume for the copy source.
<=>	Displays the copy direction. N/A: No copying is performed. ==>: Copying from the source to the target. <==: Copying from the target to the source.
Target	Displays the logical volume for the copy destination.
SID(RSID)	Displays the Session ID of ETERNUS Disk storage system (i.e. the Disk Array Name) and the Session ID of remote ETERNUS Disk storage system (i.e. the Remote Disk Array Name).
EC Status	Displays the execution status of the REC. EC Starting: The REC is starting up. EC Executing: The REC is executing. EC Suspend: The REC is suspended EC action not startup: The specified session does not exist. EC Error Suspend: An error has occurred, preventing the copy process from continuing. EC Hardware Suspend: The REC has paused because of a hardware error, such as a problem with the path between hardware devices. EC Hardware Suspend(Use REC DISK): The REC Disk buffer is in use because of a hardware error, such as a problem with the path between hardware devices. EC Hardware Suspend(Use REC BUFFER): The REC transfer buffer is in use because of a hardware error, such as a problem with the path between hardware devices. "EC Hardware Suspend(Use REC DISK)" and "EC Hardware Suspend(Use REC BUFFER)" are displayed in the following case. When the ETERNUS Disk storage system that was specified with -a option for acgroup create (Copy group creation command) is the copy source device of REC.
Copy Phase	Displays the current phase. Copying: Copy processing is executing. Paired: The copy is in the equivalency maintenance state. Not set: Either the specified session does not exist, or the copy process is not running.
Progress	Displays the progress of copy processes as a percentage. The "N/A" is displayed when the copy process is not executed. If the progress of copy processes is unknown, it is displayed "???".
Copied Block	Displays the number of blocks that have been copied.
Total Block	Displays the number of total blocks. If the number of total blocks is unknown, it is displayed "???".
Rcv	Displays the recovery mode for REC copies. auto: Indicates that the recovery mode is "Automatic". manual: Indicates that the recovery mode is "Manual". ----: Indicates that a REC copy is not being performed.
Split	Displays the split mode for REC copies. auto: Indicates that the split mode is "Automatic". manual: Indicates that the split mode is "Manual". ----: Indicates that either a REC copy is not being performed or that the mode is not synchronous mode.
Xfer	Displays the transfer mode for REC copies. sync: Indicates that the transfer mode is "Synchronous". through: Indicates that the transfer mode is "Through". consist: Indicates that the transfer mode is "Consistency". stack: Indicates that the transfer mode is "Stack". ----: REC copy is not being performed.
Copy DA	If the copy type is EC/REC, this displays the suppression settings for access to the copy destination area. on : Access is suppressed. off: Access is not suppressed. If the access suppression setting is unknown, it is displayed "???"
Operation Date	If an REC session exists, it displays the date for when the REC session state transitions indicated below last occurred (last execution date) in a "yyyy/mm/dd hh:mm:ss" format. The displaying of the date is performed on the basis of the target device's time zone. Starting of REC using the initial copy skip function (execution of acec start -skip) Suspend (execution of acec suspend) If a forced suspension was performed to an REC session in Hardware Suspend status, the last execution date will be initialized as "----/--/-- --:--:--." If a forced suspension was performed to an REC session while the execution of a copy was in progress, the last execution date will not be updated. Concurrent suspend (execution of acec suspend -concur) State transition to an error Suspend (EC Status field displays "EC Error Suspend"). State transition to a hardware Suspend (EC Status field displays "EC Hardware Suspend"). If any of the following conditions apply, the date will be displayed as "----/--/-- --:--:--." If an REC session does not exist (EC Status field displays "EC action not startup") If the initial copy (acec start) was started from a status of an REC session not existing If the REC session's copy status could not be acquired from the device (EC Status field displays "???") If using a device for which the last execution date recording function is not supported (ETERNUS DX60/DX60 S2/DX80/DX90, ETERNUS DX400 series, ETERNUS DX8000 series, ETERNUS2000, ETERNUS4000, ETERNUS8000)

NOTES

When the copy type of copy group is OPC, QuickOPC or SnapOPCP, this command cannot be executed.
Information such as Copy direction data and SID data may display as "???". Refer to "5.3 Resolving for displaying "???" in Advanced Copy status" and take action.