4.2.4 acarray detail (ETERNUS Disk storage system detail information display command)

NAME

acarray detail - Display the detail information on ETERNUS Disk storage system

SYNOPSIS

acarray detail -a diskArrayName [-route] [-xml]

DESCRIPTION

This command displays the detail information about the ETERNUS Disk storage system that has been registered.

OPTIONS

-a diskArrayName: This option specifies the ETERNUS name.

-route: This option specifies the displaying by the extended format.
Refer to the table of EXAMPLES for the displayed items.

-xml: This option specifies when displaying by the XML format.

EXIT STATUS

=0 : Completed successfully
>0 : Terminated abnormally

EXAMPLES

Displaying an ETERNUS Disk storage system which is at local site:

The execution example on Windows operating system is as follows.

> acarray detail -a ET001

Disk Array Name : ET001
BOX-ID          : 00ETERNUSDXM##ET44S20A####HK000104######
IP Address      : 10.124.6.251
Admin User      : root
Access Volume   : X:

The following table shows the meanings of the information displayed.

Title	Explanation
Disk Array Name	Displays the ETERNUS name.
BOX-ID	Displays the Box ID for ETERNUS Disk storage system.
IP Address	Displays the IP address for ETERNUS Disk storage system. (*1) Either following addresses are displayed. IPv4 address Form to which decimal mark is delimited by "." (value according to rule of IPv4) Example) 192.168.0.1 IPv6 address Form to which hexadecimal mark is delimited by ":" (It is displayed by the abbreviated notation). Example) 2001:db8::1234:0:0:1
Admin User	Displays the user name of ETERNUS Disk storage system. (*1) For the storage device which can operate by using Copy command via LAN: User who has Software role of ETERNUS Disk storage system For the storage device which cannot operate by using Copy command via LAN: User who has Administrator authorization of ETERNUS Disk storage system
Access Volume	Displays the access volume set up for the ETERNUS Disk storage system. (1)(2) For Windows Displays the device name of the physical drive. If the access volume is automatically set by acarray add (ETERNUS Disk storage system registration command) or acarray pathscan (Access volume automatic setting command), the form of "PhysicalDrive [disk number]" is used for display. The disk number is the same value as the "disk?" in the AdvancedCopy Manager block device name and the "Disk #" displayed in the [Disk Management] - [Computer Management] - [Management Tool] from the [Start] menu. For Solaris Displays the RAW device name. For Linux Displays the device name.
Access Route	Displays the method of sending the copy command to the ETERNUS Disk storage system. (*1) This item is displayed only when the -route option is specified. lan : sends the Copy command via LAN san : sends the Copy command via SAN

*1: If the specified ETERNUS Disk storage system exists at remote site, a hyphen (-) is displayed.
*2: If the Access Route is "lan", a hyphen (-) is displayed.