F.1 Associating Resources to a Cluster Service Instance

The PRIMECLUSTER-compatible cluster service instance needs to be associated with the following product:

Interstage Traffic Director

Note

For products other than the above, the procedure for associating the product to a cluster service instance is unnecessary.

The procedure for associating the above product with a PRIMECLUSTER-compatible cluster service instance is described below.

Operation Procedure:

Log in with the system administrator authority.
Log in with the system administrator authority to one of the nodes of the cluster system.
Note
Perform Step 2 only if userApplication was set up with the CUI and IP address takeover was set during userApplication setup. If IP address takeover was not set during userApplication setup, Step 2 is unnecessary.
Register the IP address takeover resources.
- Execute the "clgettree" command in the format shown below, and check the resource IDs of the PublicLAN resources in all nodes that execute IP address takeover. The resource class of PublicLAN resources is "Ethernet."
```
# /etc/opt/FJSVcluster/bin/clgettree
```
  (Example) In the following case, the resource ID of the PublicLAN resource in the narcissus node is "25" and the resource ID of the PublicLAN resource in the sweetpea node is "26."
```
# /etc/opt/FJSVcluster/bin/clgettree
```
```
Cluster 1 /
```
```
           Domain 2 RC9
```
```
           Shared 7 SHD_RC9
```
```
           Node 3 narcissus ON
```
```
                    Psd 21 hme1 ON
```
```
                    Psd 22 hme2 ON
```
```
                    Ethernet 25 hme0 ON
```
```
                    DISK 19 c0t0d0 UNKNOWN
```
```
                    SytemState2 40 FJSVndbs UNKNOWN
```
```
           Node 5 sweetpea ON
```
```
                    Psd 23 hme1 ON
```
```
                    Psd 24 hme2 ON
```
```
                    Ethernet 26 hme0 ON
```
```
                    DISK 20 c0t0d0 UNKNOWN
```
```
                    SytemState2 41 FJSVndbs UNKNOWN
```
- Execute the "clcreate-iprsc" command in the format shown below, and register the IP address takeover resources.
```
# /etc/opt/FJSVcluster/sys/clcreate-iprsc -p resource-ID-of-PublicLAN-resource...(*) takeover-IP-address(**)
```
  * For "resource-ID-of-PublicLAN-resource...," specify the resource IDs of the PublicLAN resources of all nodes that were confirmed with the previous "clgettree" command.
  If takeover of the same IP address is set to multiple PublicLAN resources in one node, specify the resource ID of one of the PublicLAN resources being used.
  ** For "takeover-IP-address," specify the takeover IP address that was specified during userApplication setup.
  (Example) If the resource IDs of the PublicLAN resources are "25," "26" and the takeover IP address is "192.168.246.1":
```
#/etc/opt/FJSVcluster/sys/clcreate-iprsc -p 25,26 192.168.246.1
```
Associate the resources to cluster service instances.
Associate the following resources to cluster service instances:
- IP address takeover resources (*)
  * If IP address takeover resources were registered in Step 2, associated them to cluster service instances.
- "Interstage Traffic Director" resources
1. Execute the "clgettree" command in the format shown below, and check the resource IDs of the resources to be associated to cluster service instances. The resource class of IP address takeover resources is "IP_Address." The resource name of the Interstage Traffic Director resource is "FJSVndbs."
```
# /etc/opt/FJSVcluster/bin/clgettree
```
  (Example) For the "clgettree command execution example" described below, the resource IDs for the IP address takeover and Interstage Traffic Director resources are as follows:
  Node
  Resource ID of IP address takeover resource
  Resource ID of Interstage Traffic Director resource
  narcissus
  27
  40
  sweetpea
  28
  41
  [Execution example of clgettree command]
```
# /etc/opt/FJSVcluster/bin/clgettree
```
```
Cluster 1 /
```
```
             Domain 2 RC9
```
```
             Shared 7 SHD_RC9
```
```
                      SHD_Host 29 192.168.246.1 UNKNOWN
```
```
                              IP_Address 27 hme0:1 UNKNOWN narcissus
```
```
                              IP_Address 28 hme0:1 UNKNOWN sweetpea
```
```
             Node 3 narcissus ON
```
```
                      Psd 21 hme1 ON
```
```
                      Psd 22 hme2 ON
```
```
                      Ethernet 25 hme0 ON
```
```
                              IP_Address 27 hme0:1 UNKNOWN
```
```
                      DISK 19 c0t0d0 UNKNOWN
```
```
                      SytemState2 40 FJSVndbs UNKNOWN
```
```
             Node 5 sweetpea ON
```
```
                      Psd 23 hme1 ON
```
```
                      Psd 24 hme2 ON
```
```
                      Ethernet 26 hme0 ON
```
```
                              IP_Address 28 hme0:1 UNKNOWN
```
```
                      DISK 20 c0t0d0 UNKNOWN
```
```
                      SytemState2 41 FJSVndbs UNKNOWN
```
2. Using the format shown below, execute the "clrepparent" command for each node in the userApplication configuration, and associate the IP address takeover and Interstage Traffic Director resource to cluster service instances.
  #/etc/opt/FJSVcluster/sys/clrepparent -s
  resource-IDs-of-IP-address-takeover-and-Interstage-Traffic Director-resources(*) -t
  resource-ID-of-cluster-service-instance(**)
  * Specify the resource IDs of the IP address takeover and Interstage Traffic Director resources that were obtained with the "clgettree" command in each node.
  ** Execute the "clgettree" command in the format shown below, and check the resource ID of the cluster service instance in each node. The resource class for cluster service instances is "AndBinding." The node name to which the cluster service instance belongs is displayed at the end of the line for the "AndBinding" resource class.
  # /etc/opt/FJSVcluster/bin/clgettree -s
  In the following example, the resource ID of the cluster service instance in the narcissus node is "101," and the resource ID of the cluster service instance in the sweetpea node is "102."
  # /etc/opt/FJSVcluster/bin/clgettree -s
  Standby 68 Service1 STOP AVAILABLE
  AndBinding 101 Instance1_Of _narcissus STOP STOP(RUN) narcissus
  AndBinding 102 Instance1_Of _sweetpea STOP STOP(RUN) sweetpea
  (Example) When the resource ID of the cluster service instance in the narcissus node is "101" and the resource ID of the cluster service instance in the sweetpea node is "102" and the following resources are registered in each node:
  Node
  Resource ID of IP address takeover resource
  Resource ID of Interstage Traffic Director resource
  narcissus
  27
  40
  sweetpea
  28
  41
```
# /etc/opt/FJSVcluster/sys/clrepparent -s 27,40 -t 101
```
```
# /etc/opt/FJSVcluster/sys/clrepparent -s 28,41 -t 102
```

Node	Resource ID of IP address takeover resource	Resource ID of Interstage Traffic Director resource
narcissus	27	40
sweetpea	28	41