A.10 bdpp_prepareserver

Name: /opt/FJSVbdpp/bin/bdpp_prepareserver - Registers the automatic configuration of the network parameter and the iSCSI name

Format: bdpp_prepareserver -m ipAddr -o file -i file -f file [-v]

Description: This command enables the automatic configuration of the network parameter and the iSCSI name for cloning.

Options

-m ipAddr

Specify the IP address of the admin LAN for the slave server whose clone image was created.

If adding a slave server to a virtual environment, specify the IP address of the admin LAN for the slave server that is the clone source.

-o file

Specify FJSVrcx.conf for the automatic configuration of the network parameter.

Specify the admin LAN information of the slave server whose clone image was created.

If adding a slave server to a virtual environment, define the admin LAN information for the slave server that is the clone source.

-i file

Specify ipaddr.conf for the automatic configuration of the network parameter.

Define the public LAN and iSCSI-LAN information for all slave servers to be cloned. If adding a slave server to a virtual environment, define the admin LAN information.

-f file

Specify initiator.conf for the automatic configuration of the iSCSI initiator name.

Define the iSCSI name for each server defined in the ETERNUS DX disk array.

-v

Specify this option when adding a slave server to a virtual environment.

Omit when adding a slave server to a physical environment.

Required permissions and execution environment

Permissions: root permissions

Execution environment: Master server

End status

The following status codes are returned:

0: Processed normally

Other than 0: Error occurred