Install ServerView Agent on the slave servers and set the required SNMP service.
Refer to the ServerView Agent manual for the method for setting the SNMP service.
For the SNMP community name, set the same value as the SNMP community name set in the iRMC.
Set Read (reference permission) or Write (reference and update permission) for the SNMP community name.
Set the Master Server admin LAN IP address as the Host that receives SNMP packets.
Set the Master Server IP address as the SNMP trap send destination.
If the Master Server that is the SNMP trap send destination has multiple NICs, set the IP address of the admin LAN of the side connected to the slave servers.
Point
This setting is not required when installing the slave server on a virtual environment.
