This section explains the 415XX message series.
[Virtual Edition]
Description
During an operation on obj, processing of function could not be performed, so it was skipped.
The name of the resource is displayed for obj.
The name of the skipped process is displayed for function.
The reason the process could not be performed is displayed for cause.
The following strings are displayed for function and cause.
When function is "VLAN settings"
Changes could not be made to the VLAN settings of the LAN switch.
When cause is "resource is in unsupported state. (IBP mode)"
As the LAN switch blade has been changed to IBP mode, it cannot be controlled using Resource Orchestrator.
The name of the LAN switch is displayed for resource.
When cause is "resource is in unsupported state. (Converged Fabric mode)"
As the LAN switch blade has been changed to Converged Fabric mode, it cannot be controlled using Resource Orchestrator.
The name of the LAN switch is displayed for resource.
When cause is "resource is in unsupported model. (VDX2730)"
For a PY CB DCB SW 10Gb 18/6/6 LAN switch blade, VLANs cannot be configured for external ports.
The name of the LAN switch is displayed for resource.
When cause is "port is in unsupported state. (Automatic Migration of Port Profile)"
VLANs cannot be configured for ports which have an Automatic Migration of Port Profile (AMPP) configured.
When cause is "resource is in unsupported model. (N2K-B22FTS-P)"
VLANs cannot be configured for a LAN switch blade PY CB 10Gb FEX Nexus B22.
The name of the LAN switch is displayed for resource.
Corrective Action
When function is "VLAN settings"
When cause is "resource is in unsupported state. (IBP mode)"
From the ROR console, check on the details window for the LAN switch displayed for resource that the end of "Device name(Product name)" of the basic information is "(Mode:IBP)". No action is necessary.
When cause is "resource is in unsupported state. (Converged Fabric mode)"
From the ROR console, check on the details window for the LAN switch displayed for resource that the end of "Device name(Product name)" of the basic information is "(Mode:Converged Fabric)". No action is necessary.
When cause is "resource is in unsupported model. (VDX2730)"
From the ROR console, check on the details window for the LAN switch displayed for resource that the "Model" in the basic information is "VDX2730". No action is necessary.
When cause is "port is in unsupported state. (Automatic Migration of Port Profile)"
Log in to the target LAN switch, and check if an Automatic Migration of Port Profile (AMPP) has been configured.
When configuring VLAN settings, release the Automatic Migration of Port Profile (AMPP) settings.
When cause is "resource is in unsupported model. (N2K-B22FTS-P)"
From the ROR console, check on the details window for the LAN switch displayed for resource that the "Model" in the basic information is "N2K-B22FTS-P". No action is necessary.
[Cloud Edition]
Description
During an operation on obj, processing of function could not be performed, so it was skipped.
The name of the resource is displayed for obj.
The name of the skipped process is displayed for function.
The reason the process could not be performed is displayed for cause.
Corrective Action
When "StorageChassisFailover" is displayed for function:
The process obj was skipped by the switchover between operating and standby storage.
Take corrective action based on the content displayed for cause.
"not supported"
There are no storage unit name or volume identifiers in the disk information.
Check that the content of the replication definition file is correct.
"mirror_definition not found"
The replication definition file corresponding to a disk registered in Resource Orchestrator does not exist.
Check that the content of the replication definition file is correct.
"not pre_created"
The disk registered with Resource Orchestrator is not the one created in advance.
The target is the disk created in advance.
When "DisasterRecovery(prepare)" is displayed for function
The process obj was skipped during the extraction of disk resource information from the configuration information of the manager of the operating storage.
Take corrective action based on the content displayed for cause.
"mirror_definition not found"
The replication definition file corresponding to a disk registered in Resource Orchestrator does not exist.
Check that the content of the replication definition file is correct.
When "Automatic Network Configuration" is displayed for function
Take corrective action based on the content displayed for cause.
"vmhost is not active mode"
When configuring network settings automatically, change the VM host vmhost to active mode, and take corrective action again.
"use virtual network definition for vmhost"
Check the content of the virtual network definition file.
When configuring the network settings automatically with a VM type that supports auto-configuration of the network, delete the virtual network definition, and perform the corrective action again.
When using a VM type that does not support auto-configuration of the network, the network device auto-configuration settings cannot be configured.
"require physical lan segment to configure vmhost"
After creating the server NIC definition and specifying the physical LAN segment name for the network resource, perform the operation again.
"resources belong to different tenants(detail)"
Perform the operation again after moving the resources displayed in detail to the same tenant.
When "port profile association" is displayed for function
The process to link the network with the port profile was skipped.
If cause is "MAC address not found. L-Server(lserver) NIC(nic)"
The port profile linking process was skipped because there is no MAC address information for the nicth NIC of lserver.
Manually create a link on the Ethernet Fabric switch if necessary.
If cause is "NIC(NIC_index,...) was allocated by older manager"
The process to link the network with the port profile was skipped due to the following reasons:
The MAC address is not managed because the virtual L-Server was created using an earlier version of Resource Orchestrator
The MAC address cannot be retrieved from the NIC on the virtual machine
Manually perform the configuration on the Ethernet Fabric switch.
When "port profile deletion" is displayed for function
The process of deleting a port profile from the Ethernet Fabric switch obj was skipped when deleting the network resource.
If cause is "associated VSI exists"
The port profile was not deleted because there is a VSI linked with the corresponding port profile on the Ethernet Fabric switch.
When deleting port profiles, delete any associated VSIs such as links with the MAC addresses of L-Servers first, and then delete the port profiles.
If cause is "in maintenance mode"
The port profile deletion process was skipped because the Ethernet Fabric switch is in maintenance mode.
Manually delete the port profile on the Ethernet Fabric switch if necessary.
When "port profile disassociation" is displayed for function
The process of deleting a port profile from the Ethernet Fabric switch obj was skipped when releasing the link between the network resource and port profile.
If cause is "in maintenance mode"
The port profile deletion process was skipped because the Ethernet Fabric switch is in maintenance mode.
Manually delete the port profile on the Ethernet Fabric switch if necessary.
