A.6.4 LAN switch blade or Network Device Attributes

LAN switch blade

General Area

LAN switch name: The name used to identify a LAN switch blade is displayed.

System Name (sysName): The name of the device specified as a LAN switch blade is displayed.

IP address

The IP address to be used for communication with the admin server is displayed.

For PY CB 10Gb FEX Nexus B22, a hyphen ("-") is displayed.

Device name (Product name): The product name of a LAN switch blade is displayed.

Model: The model name of a LAN switch blade is displayed.

Serial number: The serial number of a LAN switch blade is displayed.

Firmware version: The firmware version of a LAN switch blade is displayed.

Device status

The status of a LAN switch blade is displayed.

One of the following is displayed:

normal
error
warning
unknown

Slot: A slot number representing the mounted location is displayed.

VCS ID

A VCS ID is displayed.

When VCS is not configured, a hyphen ("-") is displayed.

RBridge ID

An RBridge ID is displayed.

When VCS is not configured, a hyphen ("-") is displayed.

Fabric ID

A Fabric ID is displayed.

When Converged Fabric is not configured, a hyphen ("-") is displayed.

Domain ID

A Domain ID is displayed.

When Converged Fabric is not configured, a hyphen ("-") is displayed.

Switch ID

A Switch ID is displayed.

When Converged Fabric is not configured, a hyphen ("-") is displayed.

Hardware Details Area

Launch Switch Blade Web UI: A link to the Web interface of the LAN switch blade is displayed.

Note

If no Web interface is available for the selected LAN switch blade, the following message is displayed:
"There is no information to display".

Refer to the LAN switch blade manual to confirm whether or not a Web interface is provided.

Port Properties Area

Port Number: The number of the port of the selected LAN switch blade is displayed.

Port Name

The name assigned to the port of the selected LAN switch blade is displayed.

For PY CB 10Gb FEX Nexus B22, internal ports are displayed as 1/1 - 1/16, external ports (from number 1 to 8) are displayed as -/17 - -/24.

Link Status

The operational status of the port is displayed.

One of the following is displayed:

up
down
unknown

For a LAN switch blade operating in Converged Fabric mode or PY CB 10Gb FEX Nexus B22, a hyphen ("-") is displayed.

Speed/DuplexMode

The speed and duplex mode of the operating port are displayed.

For a LAN switch blade operating in Converged Fabric mode or PY CB 10Gb FEX Nexus B22, a hyphen ("-") is displayed.

Link Aggregation Group: The name of the link aggregation group to which the port of the selected LAN switch blade belongs.
If it does not belong to link aggregation, a hyphen ("-") is displayed.

Link aggregation information

The following information is only displayed when LAN switch blades (*) are selected.

Link aggregation group name: The name of the link aggregation group to which the port of the selected LAN switch blade belongs is displayed.

Port name

The link aggregation port name is displayed.

For PY-SWB104 (PG-SW109)
LAG/Link aggregation group number
For PY-SWB101 (PG-SW201) or PY-SWB102(PG-SW111)
Logical port number of the LAG/port channel

Member port:Link status: The physical port names and the link status (up or down) of the physical ports are displayed for the ports in the link aggregation.

VLAN

VLAN ID: A list of VLAN IDs set in the selected LAN switch blade is displayed.

Untagged Port(s): A list of ports set with a port VLAN ID is displayed.
The logical port for link aggregation is only displayed for LAN switch blades (*).

Tagged Port(s): A list of ports set with tagged VLAN ID(s) is displayed.
The logical port for link aggregation is only displayed for LAN switch blades (*).

* Note: The following LAN switch blades are included:

PY CB Eth Switch/IBP 10Gb 18/8
PY CB Eth Switch/IBP 1Gb 36/8+2
PY CB Eth Switch/IBP 1Gb 36/12
PY CB Eth Switch/IBP 1Gb 18/6

Port Groups(IBP)

The following information is only displayed for a LAN switch blade operating in IBP mode.

Group: The name of a port group configured on the selected LAN switch blade is displayed.

Group Type

The type of this port group is displayed.

One of the following is displayed:

Port Group
VLAN Port Group
Service LAN
Service VLAN

VLAN IDs: VLAN IDs assigned to this port group are displayed.

Downlink Ports: The name of the downlink ports assigned to this port group is displayed.

Uplink Set: The name of the UplinkSet assigned to this port group is displayed.

Uplink Sets(IBP)

The following information is only displayed for a LAN switch blade operating in IBP mode.

Uplink Set: The name of an UplinkSet (set of external ports) configured on the selected LAN switch blade is displayed.

Active Ports: The name of the active port within the port backup configuration of this UplinkSet is displayed.

Backup Ports: The name of the backup port within the port backup configuration of this UplinkSet is displayed.

Link State

Displays whether link state functionality is enabled or not for this UplinkSet.

enable
disable

Port Backup

Displays whether port backup functionality is enabled or not for this UplinkSet.

enable
disable

IGMP Snooping

Displays whether IGMP snooping is enabled or not for this UplinkSet.

enable
disable

LACP

Displays whether LACP is enabled or not for this UplinkSet.

enable
disable

Network links

Resource Name (left side): The name of the selected LAN switch blade is displayed.

I/F (left side)

The port name of the LAN switch blade is displayed.

For PY CB 10Gb FEX Nexus B22, internal ports are displayed as 1/1 - 1/16, external ports (from number 1 to 8) are displayed as -/17 - -/24.

I/F (right side): The interface name of the resource connected to the LAN switch blade is displayed.

Resource Name (right side): The name of the resource connected to the LAN switch blade is displayed.

Note

Information about connections with network devices is not displayed.

Network Device

General Area

Network device name: The name used to identify a network device is displayed.

System Name (sysName): The name of the device specified as a network device is displayed.

IP address: The IP address to be used for communication with the admin server is displayed.

Device name (Product name)

The product name of a network device is displayed.

For NS appliances, "NSAppliance" is displayed.

Model

The model name of a network device is displayed.

For NS appliances, "NSAppliance" is displayed.

Vendor

The vendor name of a network device is displayed.

For NS appliances, "Fujitsu" is displayed.

Serial number

The serial number of a network device is displayed.

For NS appliances, "-" is displayed.

Firmware version: The firmware version of a network device is displayed.

Device status

The status of a network device is displayed.

One of the following is displayed:

normal
error
warning
unknown

Slot: A hyphen ("-") is displayed.

Maintenance mode

The status of maintenance mode is displayed.

One of the following is displayed:

active
maintenance

Type

The type of a network device is displayed.

One of the following is displayed:

L2-Switch
Firewall
SLB
Fabric

For network devices with multiple types, all types are displayed separated by commas (",").
For virtual appliances, "(virtual)" is displayed following Type.

Location: Displays the location of the network device.

Auto configuration

Displays whether the network device is set to be automatically set or not.

true
false

Fabric ID

A Fabric ID of an Ethernet Fabric is displayed.

This is only displayed when an Ethernet Fabric is selected.

Port Profile

Displays whether the port profile setting is enabled or not.

enable
disable

This is only displayed when an Ethernet Fabric is selected.

Redundant Configuration

Group ID: The group ID is displayed.

Network Devices: Another device in the redundancy configuration is displayed.
When there are multiple devices, the names of those devices are displayed separated by commas (",").

Hardware Details Area

Launch Network Device Web UI: A link to the Web interface of the network device is displayed.
Clicking the link displays the Web interface of the network device.
Links will be displayed even for devices that the Web UI does not support, but if these links are clicked, the Web interface will not be displayed.
Refer to the manual of the network device to confirm whether a Web interface is provided.

Port Properties Area

Port Number: The number of the port of the selected network device is displayed.

Port Name: The name assigned to the port of the selected network device is displayed.

Member Port: When the name of a port with link aggregation is displayed for the port name, the port names of the physical port with link aggregation are displayed separated by commas (",").
When the physical port name is displayed as the port name, a hyphen ("-") is displayed.

Link Status

The operational status of the port is displayed.

One of the following is displayed:

up
down
unknown

Speed/DuplexMode: The speed and duplex mode of the operating port are displayed.

Port Type

The port type of a network device is displayed.

One of the following is displayed:

This is only displayed when an Ethernet Fabric is selected.

VLAN

VLAN ID: A list of VLAN IDs set in the selected network device is displayed.

Untagged Port(s): A list of ports set with a port VLAN ID is displayed.
The logical port for link aggregation is not displayed.

Tagged Port(s): A list of ports set with tagged VLAN ID(s) is displayed.
The logical port for link aggregation is not displayed.

Network links

Resource Name (left side): The name of the selected network device is displayed.

I/F (left side): The port name of the network device is displayed.

I/F (right side): The interface name of the resource connected to the network device is displayed.

Resource Name (right side): The name of the resource connected to the network device is displayed.

ruleset

Name (Label): The name of the ruleset is displayed.
This is only displayed when the type of a network device is "Firewall" or "SLB".

Category

The category of the ruleset is displayed.
One of the following is displayed:

Config
Operation

Description: A description of the ruleset is displayed.

Login Information Area

Tenant: Displays the name of the tenant that can be used as login information for the network device.
If the network device type is "L2-Switch", a hyphen ("-") is displayed.

IP address: The IP address which the network device logs into is displayed.

Port Number: The port number which the network device logs into is displayed.

Protocol: The name of the protocol used to login to the network device is displayed.

User ID: The user name used to login to the network device is displayed.

Authority: The privileges of the user used to login to the network device are displayed.

Authentication: The user authentication method for the network device is displayed.

Login Check

An account information check result is displayed.

One of the following is displayed:

successful
failed
unchecked

Monitoring Settings Area

SNMP community name: Displays the community name used for SNMP communications with the network device.

Monitoring method

The type of monitoring used on the network device is displayed.

One of the following is displayed:

None
ping
SNMP (Simple Network Management Protocol)
ping+SNMP

Monitoring interval (sec): Displays the monitoring interval (in seconds) for the network device.

Retry count: Displays the number of retries when monitoring of the network device fails (no response before timeout).

Timeout(sec): Displays the time (in seconds) a response is waited for before it is determined monitoring of the network device has failed.