The name used to identify a server is displayed.
The model name of the server is displayed.
When the server has been registered as a managed server and powered on, the server model name obtained from ServerView Operations Manager is displayed. For other servers, no model name is displayed.
The product name of the server is displayed.
For PRIMERGY BX servers, the product name obtained from the management blade is displayed. For other servers, the model name is displayed.
Server status is displayed.
A slot number representing the mounted location is displayed.
Displayed only for PRIMERGY BX servers.
The partition number is displayed.
Only displayed when a PRIMEQUEST, or a SPARC Enterprise M4000/M5000/M8000/M9000 server, or a server in a FUJITSU M10-4S is selected.
The operational status of the server is displayed.
One of the following is displayed:
active
maintenance
Not displayed when Fujitsu M10/SPARC Enterprise are selected.
The illumination status of the maintenance LED is displayed.
Displayed only for PRIMERGY BX servers.
The MAC address of the NIC used for the admin LAN is displayed.
Not displayed when Fujitsu M10/SPARC Enterprise are selected.
The CPU type of the physical server is displayed.
The type of CPU is displayed.
When using servers other than the following, a hyphen ("-") is displayed.
PRIMERGY BX Series Servers
SPARC Enterprise M-Series
FUJITSU M10
CPU clock speed (frequency) is displayed.
When using servers other than the following, a hyphen ("-") is displayed.
PRIMERGY BX Series Servers
SPARC Enterprise M-Series
FUJITSU M10
The total capacity of server memory is displayed.
When using servers other than the following, a hyphen ("-") is displayed.
PRIMERGY BX Series Servers
SPARC Enterprise M-Series
FUJITSU M10
The MAC address of the network interface used for the HBA address rename setup service or for admin LAN redundancy is displayed.
For PRIMERGY RX series servers, TX series servers, the MAC address is displayed after HBA address rename settings is configured.
Not displayed when Fujitsu M10/SPARC Enterprise are selected.
Displayed when NIC redundancy has been configured for admin LANs.
The hardware maintenance mode of the server is displayed.
Displayed only for PRIMEQUEST servers.
The boot option setting specified when registering servers is displayed.
The link to the allocated L-Server information is displayed.
See
Refer to the Management Blade's manual for details on management blades' product names.
Refer to the ServerView Operation Manager manual for details on the server models displayed and obtained from ServerView Operation Manager.
Refer to "11.2 Resource Status" in the "Operation Guide CE" for details on resource statuses.
The link to the web interface of a server management software is displayed.
Displayed only for the following servers:
PRIMERGY Series
PRIMEQUEST Servers
Fujitsu M10/SPARC Enterprise
IP address of the remote management controller is displayed.
Displayed only for servers other than PRIMERGY BX servers.
The link to the web interface of external I/O virtualization management software is displayed.
Displayed only if coordinated up with external I/O virtualization management software.
The assigned VIOM server profile name is displayed.
Displayed only if managed by VIOM and a server profile has been set.
The list of physical connections between the server's network interfaces and LAN switch ports is displayed.
When a column heading in the list is clicked, the color of the selected column will change and the resources can be sorted in either ascending or descending order.
The MAC addresses and IP addresses of each server are displayed.
For servers other than PRIMERGY BX servers and PRIMEQUEST servers, only admin LAN information is displayed.
For Fujitsu M10/SPARC Enterprise, only the IP address is displayed.
Information
The IP address displayed is the one set within the server's operating system.
For network interfaces that were made redundant using BACS software, the information set in BACS (within the operating system) is displayed.
The following information is displayed only when a PRIMEQUEST, or a SPARC Enterprise M4000/M5000/M8000/M9000 server, or a server in a FUJITSU M10-4S is selected.
The name used to identify a partition is displayed.
The ID of the system board used to configure a partition is displayed.
The ID of the IO board used to configure a partition is displayed.
The ID of the GSPB used to configure a partition is displayed.
The ID of the Reserved SB assigned to a partition is displayed.
The partition logical system board (LSB) number is displayed.
Only displayed for SPARC Enterprise M4000/M5000/M8000/M9000 or FUJITSU M10-4S.
The partition eXtended System Board (XSB) number is displayed.
Only displayed for SPARC Enterprise M4000/M5000/M8000/M9000 servers.
The partition physical system board (PSB) number is displayed.
Only displayed for FUJITSU M10-4S.
