This section details the network links displayed in the NetworkViewer.
The following table details the physical and virtual links displayed between resources.
The color of links changes depending on resource status, VLAN research status or the selective state of resource.
Status | Default/VLAN | Link | Meaning |
|---|---|---|---|
normal | Default |
| Represents a physical or virtual link. |
Selecting VLAN |
| ||
error | Default |
| An error was detected from the link (e.g. the port of LAN switch blades, L2 switches, were disabled, or the cable was disconnected). |
Selecting VLAN |
| ||
warning | Default |
| When error status is found in a part of links among two or more links that connects between the resources, the warning status is shown. |
Selecting VLAN |
| ||
Disabled | Default |
| Indicates the links of ports which have been disabled |
Selecting VLAN |
|
Status | Default/VLAN | Link | Meaning |
|---|---|---|---|
Normal | Default |
| Indicates physical links or virtual links. |
Selecting VLAN |
| ||
Error | Default |
| An error was detected from the link (e.g. the port of LAN switch blades, L2 switches, were disabled, or the cable was disconnected). |
Selecting VLAN |
| ||
Warning | Default |
| When error status is found in a part of links among two or more links that connects between the resources, the warning status is shown. |
Selecting VLAN |
| ||
Disabled | Default |
| Indicates the links of ports which have been disabled |
Selecting VLAN |
|
Note
Vlan search status is only displayed port to port or port to NIC. If both resource and resource ends are not port or NIC, vlan search status is not displayed.
